17
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
■Switching to the high beams
Push the lever away from you.
The Automatic High Beam indicator will
turn off and the high beam indicator will
turn on.
Pull the lever to its original position to acti-
vate the Automatic High Beam system
again.
■Switching to the low beams
Press the Automatic High Beam switch.
The Automatic High Beam indicator will
turn off.
Press the switch to activate the Automatic
High Beam system again.
■Temporarily switching to the low beams
Pull the lever toward you and then return it
to its original position.
The high beams are on while the lever is
pulled toward you, however, after the lever
is returned to its orig inal position, the low
beams remain on for a certain amount of
time. Afterwards, the Automatic High
Beam will be activated again.
Turning the high beams on/off manually
What to do if...
71
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
See the “OWNER’S MANUAL”
Turn signal indicatorIntuitive parking assist
indicator (if equipped)
Headlight indicator (U.S.A.)
(Flashes)
Slip indicator
Tail light indicator (Canada)VSC OFF indicator
Headlight high beam indicator
(U.S.A.)
Parking brake indicator
Automatic High Beam
indicator
(Canada)
Parking brake indicator
PCS warning lightBrake hold standby indicator
Cruise control indicatorBrake hold operated indicator
Dynamic radar cruise control
indicatorSecurity indicator
Cruise control “SET” indicatorLow outside temperature
indicator
*2LTA indicatorEco Driving Indicator Light
BSM (Blind Spot Monitor)
outside rear view mirror indi-
cators
(U.S.A.)
“AIR BAG ON/OFF”
indicator
For further information, refer to the “OWNER’S MANUAL”.
