2023 LEXUS RC350 high beam

1
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
Pictorial Index ............................................................................................................................. 3
Floor Mat Installation Floor Mat Installation......................................................................................................... ..............11
When Driving Turn Signal Lever .............................................................................................................. .............. 12
Multi-information Display...................................................................................................... ...... 13
Headlights ..................................................................................................................... ..................... 15
AHB (Automatic High Beam)................................................................................................... 16
Windshield Wipers and Washer.............................................................................................. 18
Intuitive Parking Assist . ............................................ ................................................ ................... 23
BSM (Blind Spot Monitor) ....................................................................................................... .. 24
Tire Pressure Warning System ................................................................................................25
ASC (Active Sound Control) ................................................................................................... 26
Contents
The Quick Guide is not intended as a substitute for yourOWNER’S MANUAL. We strongly encourage you to review
the OWNER’S MANUAL and supplementary manuals so you
will have a better understandin g of your vehicle’s capabilities
and limitations.

5
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
■Switches
BSM (Blind Spot Monitor) main switch ............................................................. P.24
Windshield wiper de-icer switch
*1, 2
Odometer/trip meter/trip meter reset button*1
Instrument panel light control switches*1
ASC switch*2............................................................................................................ P.26
Intuitive parking assist switch
*2.......................................................................... P.23
Automatic High Beam switch ................................................................................ P.16
*1: Refer to the “OWNER’S MANUAL”.
*2:If equipped
A
B
C
D
E
F
G

15
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
1 The side marker, parking, tail,
license plate, inst rument panel lights,
and daytime running lights turn on.
2 The headlights and all lights listed
above (except daytime running lights)
turn on.
3 The headlights, daytime running
lights and all the lights listed above turn
on and off automatically. (When the
engine switch is in IGNITION ON
mode.)
4 (U.S.A.) Off
U.S.A.
Canada
1With the headlights on, push the lever
away from you to turn on the high
beams.
Pull the lever toward you to the center
position to turn the high beams off.
2Pull the lever toward you and release it
to flash the high beams once.
You can flash the high beams with the
headlights on or off.
Headlights
A
B
Turning on the high beam headlights

16
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
1Press the Automatic High Beam
switch.
2Turn the headlight switch to the or position.
The Automatic High Beam indicator
will come on when the system is oper-
ating.
AHB (Automatic High Beam)
The Automatic High Beam uses a camera sensor located behind the upper portion of the
windshield to assess the brightness of the lights of vehicles ahead, streetlights, etc., and
automatically turns the high beams on or off as necessary.
Activating the Automatic High Beam

17
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
■Switching to the high beams
Push the lever away from you.
The Automatic High Beam indicator will
turn off and the high beam indicator will
turn on.
Pull the lever to its original position to acti-
vate the Automatic High Beam system
again.
■Switching to the low beams
Press the Automatic High Beam switch.
The Automatic High Beam indicator will
turn off.
Press the switch to activate the Automatic
High Beam system again.
■Temporarily switching to the low beams
Pull the lever toward you and then return it
to its original position.
The high beams are on while the lever is
pulled toward you, however, after the lever
is returned to its orig inal position, the low
beams remain on for a certain amount of
time. Afterwards, the Automatic High
Beam will be activated again.
Turning the high beams on/off manually

What to do if...
71
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
See the “OWNER’S MANUAL”
Turn signal indicatorIntuitive parking assist
indicator (if equipped)
Headlight indicator (U.S.A.)
(Flashes)
Slip indicator
Tail light indicator (Canada)VSC OFF indicator
Headlight high beam indicator
(U.S.A.)
Parking brake indicator
Automatic High Beam
indicator
(Canada)
Parking brake indicator
PCS warning lightBrake hold standby indicator
Cruise control indicatorBrake hold operated indicator
Dynamic radar cruise control
indicatorSecurity indicator
Cruise control “SET” indicatorLow outside temperature
indicator
*2LTA indicatorEco Driving Indicator Light
BSM (Blind Spot Monitor)
outside rear view mirror indi-
cators
(U.S.A.)
“AIR BAG ON/OFF”
indicator
For further information, refer to the “OWNER’S MANUAL”.