2023 HYUNDAI I20 radio

5-112
Convenient features
&KDQJLQJWKHUDGLRPRGH
1. On the control panel, press the
[AUDIO] button.
2. When the mode selection window
displays, turn the [781(] knob to
select the desired radio mode and
then press the knob.

[Each time you press the [MODE]
button on the steering wheel, the
radio mode switches to FM u AM in
order.
NOTICE
:KHQWKH0RGHSRSXSLVQRWVHOHFWHG
LQ>0(18&/2&.@X0RGHSRSXSSUHVV
WKH>$8',2@EXWWRQRQWKHFRQWUROSDQHO
WRFKDQJHWKHUDGLRPRGH
(DFKWLPH\RXSUHVVWKH>$8',2@EXWWRQ
RQWKHFRQWUROSDQHOWKHUDGLRPRGH
VZLWFKHVWR)0X'$%LIHTXLSSHGX
$0LQRUGHU
6FDQQLQJIRUDYDLODEOHUDGLR
VWDWLRQV
You can listen to each radio station for
a few seconds to test the reception and
select the one you want.
1. From the radio screen, press the
[0(18&/2&.] button on the control
panel.
2. When the option selection window
displays, turn the [781(] knob to
select 6FDQ, and then press the knob.

[The system searches for radio
stations with strong radio signals
and plays each radio station for
about five seconds.
3. When you find the radio station you
want to listen to, press the [781(]
knob.

[You can continue listening to the
selected station.
6HDUFKLQJIRUUDGLRVWDWLRQV
To search for the previous or next
available radio station, press the [<
6((.] button / [75$&. >] button on the
control panel.

[You can also press and hold the
[< 6((.] button / [75$&. >] button
to search for frequencies quickly.
When you release the button, a radio
station with a strong signal is selected
automatically.
If you know the exact frequency of the
radio station you want to listen to, turn
the [781(] knob on the control panel to
change the frequency.

5-113
05
6DYLQJUDGLRVWDWLRQV
You can save your favorite radio stations
and listen to them by selecting them
from the preset list.
Saving the current radio station
Whilst listening to the radio, press and
hold the desired number button on the
control panel.

[The radio station you are listening to
will be added to the selected number.

[To save the next page of the preset
list, press the [FAV] button.
NOTICE

[ <RXFDQVDYHXSWRUDGLRVWDWLRQVLQ
HDFKPRGH

[ ,IDVWDWLRQLVDOUHDG\VDYHGWRWKH
VHOHFWHGSUHVHWQXPEHUWKHVWDWLRQ
ZLOOEHUHSODFHGE\WKHVWDWLRQ\RX
DUHOLVWHQLQJWR
Using the auto save function
You can search for radio stations in your
area where there is a strong signal. The
results of your search can be saved to
the preset list automatically.
1. From the radio screen, press the
[0(18&/2&.] button on the control
panel.
2. When the option selection window
displays, turn the [781(] knob to
select Autostore, and then press the
knob.
/LVWHQLQJWRVDYHGUDGLRVWDWLRQV
)0$00RGH
1. Confirm the preset number for the
radio station you want to listen to.

[To view the next page of the preset
list, press the [FAV] button.
2. On the control panel, press the
desired number button.

[Alternatively, push the Up/Down
lever on the steering wheel to
change the station.

Driver assistance system
7-10

[You are departing or returning to the
lane

[Unstable driving

[You are on a roundabout and the
vehicle in front is not detected

[You are continuously driving in a circle

[The vehicle in front has an unusual
shape

[The vehicle in front is driving uphill or
downhill

[The pedestrian or cyclist is not
fully detected, for example, if the
pedestrian is leaning over or is not
fully walking upright

[The pedestrian or cyclist is wearing
clothing or equipment that makes it
difficult to detect as a pedestrian or
cyclist
OADAS044
The illustration above shows the image
the front view camera will detect as a
vehicle, pedestrian and cyclist.

[The pedestrian or cyclist in front is
moving very quickly

[The pedestrian or cyclist in front is
short or is posing a low posture

[The pedestrian or cyclist in front has
impaired mobility

[The pedestrian or cyclist in front is
moving intersected with the driving
direction
[There is a group of pedestrians,
cyclists or a large crowd in front

[The pedestrian or cyclist is wearing
clothing that easily blends into the
background, making it difficult to
detect

[The pedestrian or cyclist is difficult to
distinguish from the similar shaped
structure in the surroundings

[You are driving by a pedestrian,
cyclist, traffic sign, structure, etc. near
the intersection

[Driving in a parking lot

[Driving through a tollgate,
construction area, unpaved road,
partial paved road, uneven road,
speed bumps, etc.

[Driving on an incline road, curved
road, etc.

[Driving through a roadside with trees
or streetlights

[The adverse road conditions cause
excessive vehicle vibrations whilst
driving

[Your vehicle height is low or high
due to heavy loads, abnormal tyre
pressure, etc.

[Driving through a narrow road where
trees or grass are overgrown

[There is interference by
electromagnetic waves, such as
driving in an area with strong radio
waves or electrical noise

Driver assistance system
7-26

[The pedestrian or cyclist is not
fully detected, for example, if the
pedestrian is leaning over or is not
fully walking upright

[The pedestrian or cyclist is wearing
clothing or equipment that makes it
difficult to detect as a pedestrian or
cyclist
OADAS044
The illustration above shows the image
the front view camera will detect as a
vehicle, pedestrian and cyclist.

[The pedestrian or cyclist in front is
moving very quickly

[The pedestrian or cyclist in front is
short or is posing a low posture

[The pedestrian or cyclist in front has
impaired mobility

[The pedestrian or cyclist in front is
moving intersected with the driving
direction

[There is a group of pedestrians,
cyclists or a large crowd in front
[The pedestrian or cyclist is wearing
clothing that easily blends into the
background, making it difficult to
detect

[The pedestrian or cyclist is difficult to
distinguish from the similar shaped
structure in the surroundings

[You are driving by a pedestrian,
cyclist, traffic sign, structure, etc. near
the intersection

[Driving in a parking lot

[Driving through a tollgate,
construction area, unpaved road,
partial paved road, uneven road,
speed bumps, etc.

[Driving on an incline road, curved
road, etc.

[Driving through a roadside with trees
or streetlights

[The adverse road conditions cause
excessive vehicle vibrations whilst
driving

[Your vehicle height is low or high
due to heavy loads, abnormal tyre
pressure, etc.

[Driving through a narrow road where
trees or grass are overgrown

[There is interference by
electromagnetic waves, such as
driving in an area with strong radio
waves or electrical noise

07
7-97
[Only part of the vehicle is detected

[The vehicle in front has no tail lights,
tail lights are located unusually, etc.

[The brightness outside is low, and the
tail lamps are not on or are not bright

[The rear of the front vehicle is small
or does not look normal (i.e. tilted,
overturned, etc.)

[ 7KHIURQWYHKLFOH
TVJURXQGFOHDUDQFHLV
low or high

[A vehicle suddenly cuts in front

[Your vehicle is being towed

[Driving through a tunnel or iron bridge

[Driving near areas containing metal
substances, such as a construction
zone, railroad, etc.

[A material is near that reflects very
well on the front radar, such as a
guardrail, nearby vehicle, etc.

[The bumper around the front radar is
impacted, damaged or the front radar
is out of position

[The temperature around the front
radar is high or low

[Driving in large areas where there are
few vehicles or structures (i.e. desert,
meadow, suburb, etc.)

[The vehicle in front is made of material
that does not reflect on the front radar

[Driving near a highway (or motorway)
interchange or tollgate

[Driving on a slippery surface due to
snow, water puddle, ice, etc.

[Driving on a curved road

[The vehicle in front is detected late

[The vehicle in front is suddenly
blocked by a obstacle

[The vehicle in front suddenly changes
lane or suddenly reduces speed
[The vehicle in front is bent out of
shape

[ 7KHIURQWYHKLFOH
TVVSHHGLVIDVWRU
slow

[With a vehicle in front, your vehicle
changes lane at low speed

[The vehicle in front is covered with
snow

[Unstable driving

[You are on a roundabout and the
vehicle in front is not detected

[You are continuously driving in a circle

[Driving in a parking lot

[Driving through a construction area,
unpaved road, partially paved road,
uneven road, speed bumps, etc.

[Driving on an incline road, curved
road, etc.

[Driving through a roadside with trees
or streetlights

[The adverse road conditions cause
excessive vehicle vibrations whilst
driving

[Your vehicle height is low or high
due to heavy loads, abnormal tyre
pressure, etc.

[Driving through a narrow road where
trees or grass are overgrown

[There is interference by
electromagnetic waves, such as
driving in an area with strong radio
waves or electrical noise

8-7
08
i Information
Pb
An inappropriately disposed
battery can be harmful to the
environment and human
health. Dispose of the battery
according to your local law(s)
or regulations.
Jump starting procedure
1. Position the vehicles close enough
that the jumper cables will reach, but
do not allow the vehicles to touch.
2. Avoid fans or any moving parts in the
engine compartment at all times, even
when the vehicles are turned off.
3. Turn off all electrical devices such
as radios, lights, air conditioning,
etc. Put the vehicles in P (Park, for
automatic transmission/dual clutch
transmission vehicle) or neutral (for
manual transmission vehicle), and set
the parking brakes. Turn both vehicles
OFF.1VQA4001
4. Connect the jumper cables in
the exact sequence shown in the
illustration. First connect one jumper
cable to the red, positive (+) jumper
terminal of your vehicle (1).
5. Connect the other end of the jumper
cable to the red, positive (+) battery/
jumper terminal of the assisting
vehicle (2).
6. Connect the second jumper cable to
the black, negative (-) battery/ chassis
ground of the assisting vehicle (3).
7. Connect the other end of the second
jumper cable to the black, negative (-)
chassis ground of your vehicle (4).
Do not allow the jumper cables to
contact anything except the correct
battery or jumper terminals or the
correct ground. Do not lean over the
battery when making connections.
8. Start the engine of the assisting
vehicle and let it run at approximately
2,000rpm for a few minutes. Then
start your vehicle.
If your vehicle will not start after a
few attempts, it probably requires
servicing. In this event, please seek
qualified assistance. If the cause of your
battery discharging is not apparent, we
recommend that you have your vehicle
checked by a HYUNDAI authorised
repairer.

8-14
Emergency situations
TPMS (Tyre Pressure
Monitoring System)
malfunction indicator
The TPMS Malfunction Indicator
will illuminate after it blinks for
approximately one minute when there
is a problem with the Tyre Pressure
Monitoring System.
We recommend that you have the
system checked by a HYUNDAI
authorised repairer as soon as possible.
NOTICE
If there is a malfunction with the TPMS,
the Low Tyre Pressure Position Telltale
will not be displayed even though the
vehicle has an under-inflated tyre.
NOTICE
The TPMS Malfunction Indicator may
illuminate after blinking for one minute
if the vehicle is near electric power
supply cables or radio transmitters
such as police stations, government
and public offices, broadcasting
stations, military installations, airports,
transmitting towers, etc.
Additionally, the TPMS Malfunction
Indicator may illuminate if snow chains
are used or electronic devices such as
computers, chargers, remote starters,
navigation, etc. This may interfere with
normal operation of the TPMS.
Changing a tyre with TPMS
If you have a flat tyre, the Low Tyre
Pressure and Position telltales will come
on. We recommend that you have
the flat tyre repaired by a HYUNDAI
authorised repairer as soon as possible
or replace the flat tyre with the spare
tyre.
NOTICE
It is recommended that you do not
use a puncture-repairing agent not
approved by HYUNDAI dealer or the
equivalent specified for your vehicle
to repair and/or inflate a low pressure
tyre. Tyre sealant not approved by
HYUNDAI dealer or the equivalent
specified for your vehicle may damage
the tyre pressure sensor.
The spare tyre (if equipped) does not
come with a tyre pressure monitoring
sensor. When the low pressure tyre or
the flat tyre is replaced with the spare
tyre, the Low Tyre Pressure Telltale will
remain on. Also, the TPMS Malfunction
Indicator will illuminate after blinking
for one minute if the vehicle is driven
at speed above 15.5 mph (25 km/h) for
approximately 10 minutes.
Once the original wheel equipped with
a tyre pressure monitoring sensor is
reinflated to the recommended pressure
and reinstalled on the vehicle, the
Low Tyre Pressure Telltale and TPMS
Malfunction Indicator will go off within a
few minutes of driving.
❈ All vehicles sold in the EUROPE
market during below period must be
equipped with TPMS.
- New model vehicle : Nov. 1, 2012 ~
- Current model vehicle : Nov. 1, 2014~
(Based on vehicle registrations)