2023 FORD EXPLORER engine

[x] Cancel search: engine

Page 132 of 573

FORD EXPLORER 2023  Owners Manual ActionMessage
Indicates that your vehicle is still in Transport mode. This may notallow some features to operate properly. Have the system checkedas soon as possible.
Transport ModeContact Dealer
Indi

Page 134 of 573

FORD EXPLORER 2023  Owners Manual Park Brake
ActionMessage
The parking brake is set, the engine is running and you drive yourvehicle more than 3 mph (5 km/h). If the warning stays on after theparking brake is released, contact an auth

Page 136 of 573

FORD EXPLORER 2023  Owners Manual Seats
ActionMessage
Objects are by the passenger seat. After the objects are movedaway from the seat, if the warning stays on or continues to comeon have the system checked as soon as possible.
Occupa

Page 138 of 573

FORD EXPLORER 2023  Owners Manual Transmission
ActionMessage
You switched the engine off and shift select lever is in any positionother than park (P).Shift to Park
Transmission is too cold. Wait for it to warm up before you drive.Tran

Page 144 of 573

FORD EXPLORER 2023  Owners Manual Note:Do not place objects under the frontseats as this may interfere with the airflowto the rear seats.
Note:Remove any snow, ice or leaves fromthe air intake area at the base of thewindshield.
Note:T

Page 153 of 573

FORD EXPLORER 2023  Owners Manual 8-Way Seat Controls
Adjusting the Multi-Contour FrontSeats With Active Motion  (If Equipped)
Note:The engine must be running or thevehicle must be in accessory mode toactivate the seats.
Note:Allow a

Page 160 of 573

FORD EXPLORER 2023  Owners Manual Press to fold the left-hand thirdrow seat.A
Press to fold and unfold boththird row seats.B
Press to fold the right-hand thirdrow seat.C
To return the third-row seat backrest tothe original position, p

Page 161 of 573

FORD EXPLORER 2023  Owners Manual Press the heated seat symbol to cyclethrough the various heat settings and off.More indicator lights indicate warmersettings.
Note:The heated seats switch on during aremote start if they are enabled.