2023 BMW X3 Owners Manual

Changing the speed
Press the rocker switch up or down repeatedly
until the desired speed is set.
If active, the displayed speed is stored and
the vehicle reaches the stored speed when the road is clear.

in some situations, for instance on downhill oruphill grades.
Active Cruise Control withStop&Go function
Principle Using the Cruise Control, a desired speed and
a distance to a vehicle ahead can be adjusted using the buttons on the steering wheel.
General information
The system maintains the set speed on clear
roads. The vehicle accelerates or brakes auto

Warning
When towing with Intelligent Safety systems
enabled or Cruise Control switched on, in

Setting the functionWhen the system is active, press the
button repeatedly until the desired function is selected in the toolbar. The
toolbar for Assisted Driving mode is displayed
at the bottom of the instrument cluster.IconFunctionCruise Control with Distance Control.Depending on the equipment version,
cruise control with distance control
and Steering Assistant.
The selected function is shown in green.
Turning on
With Steering Assistant:
1. Press the button on the steering
wheel.2. If necessary, set the cruise control.
Without Steering Assistant:
Press the button on the steering
wheel.
The indicator lights in the instrument cluster light up and the mark on the speedometer is
set to the current speed.
Cruise control is active. The current speed is
maintained and stored as set speed.
If necessary, the Dynamic Stability Control willbe turned on.
Turning off
To switch off the system while stationary, step on brake pedal at the same time.
Press the button on the steering wheel:
With Steering Assistant.
Without Steering Assistant.
The displays turn off. The stored set speed is deleted.
Interrupting manually When active, press the button on the steering
wheel:
With Steering Assistant.
Without Steering Assistant.
If interrupting the system while stationary,
press on the brake pedal at the same time.
Interrupting automatically The system is automatically interrupted in the
following situations:

Adjusting the speedMaintaining and storing the speed
Press the rocker switch up or down once while
the system is interrupted. The system will be activated.
The current speed is maintained and stored as desired speed.
The stored speed is displayed on the speed

distance according to the traffic situation or the
ambient conditions, for instance poor visibility.1."CAR"2."Settings"3."Driver Assistance"4.If necessary, "Driving"5."Speed Limit Assistance"6."Adjust distance acc. to situation"
Continuing cruise control
An interrupted cruise control can be continued by calling up the stored speed.
Make sure that the difference between current
speed and stored speed is not too large be

Distance to vehicle ahead of you
Selected distance to the vehicle ahead of you
is shown.IconDescriptionDistance 1Distance 2Distance 3Distance 4
This value is set automatically
after the system is switched
on.No distance control display, as
the accelerator pedal is being
pressed.
Detected vehicle
IconDescriptionGreen icon:
A vehicle has been detected
ahead of you.
When the distance to the detected vehicle in

Alternative displaysIconDescriptionIndicator light green: system is
active.
No indicator light: system is
switched off.Vehicle icon flashes:
The conditions are not ade