2022 MERCEDES-BENZ GLE SUV Owners Manual

1
Cap
2 Flacon 
To insert: slide t he Oacon into the holder as far
as it will go. 
To remove: aser opening t
he glove box, wait
for approximately seven seconds and pull out
the Oacon. If you do not use genuine Mercedes-Benz interior
per
fumes, observe the manufacturers' safety noti-
ces on the perfume packaging.
Dispose of the genuine Mercedes-Benz interior
perfume Oacon when it is empty and do not reNll
it.
ReNllable Oacon 
Unscrew the cap of the empty Oacon. 
Fill the Oacon wit
h a maximum of 15 ml. 
Screw the cap back onto the Oacon.
Always r
eNll the empty reNllable Oacon with the
same perfume. Observe the separate information
sheet with the Oacon. Information on the windscreen heater
The windscreen heater is switched on automati-
call

y if the d button is activated.
In addition, it is automatically switched on when
necessary. Pre-entry climate control via the key (plug-in
h

ybrid) Function of pre-entry climate control via the key
(plug-in h
ybrid)
Before entering the vehicle, the driver's side or
the whole vehicle interior can be brieOy pre-
warmed or pre-cooled.
When pre-cooling, the following functions are acti-
vated as needed:
= Automatic climate control
= Blower
= Seat ventilation
When pre-heating, the following functions are acti-
vated as needed: = Automatic climate control
= Blower
= Seat heating
= Steering wheel heater
= Panel heating
= Mirror heater
= Rear window heater 174
Climate control

=
F ragrancing
= Ionisation
Setting pre-entry climate control via the key (plug-
in hybrid)
Multimedia system:
4 Climate menu 5
Pre-entry climate ctrl
Switching on/oM 
Select =. 
Select Pre-entry climate control via key.
Activating/deactivating pre-entry climate control
via t
he key (plug-in hybrid)
Requirements: = The high-voltage battery is charged suP-
ciently.
= The function has been activated via the multi-
media system. 
To switch on: unloc
k the vehicle.
The climate control functions are activated for
up to Nve minutes for pre-heating and pre-
cooling. Pre-entry climate control via the key cannot be
activ

ated more than twice when the vehicle is
switched oM. 
To switch oM: push t
he ; button up or
down.
The following functions will remain active once the
v
ehicle has been started:
= Seat heating
= Seat ventilation
= Panel heating
= Fragrancing
= Ionisation Pre-entry climate control for departure time (plug-
in h

ybrid) Function of pre-entry climate control for depar-
tur
e time (plug-in hybrid) &
WARNING Risk of f
atal injury due to expo-
sure to extreme heat or cold in the vehicle
If persons, particularly children, are subjected
t
o prolonged exposure to intense heat or cold,
there is a risk of severe injury or even death. 
Never leave persons, particularly chil-
dr
en, unattended in the vehicle. The vehicle interior can be air conditioned when
t

he vehicle is parked.
When the vehicle is connected to power supply
equipment, priority is given to charging the high-
voltage battery to a speciNed minimum charge.
The running time of pre-entry climate control may
be reduced under the following conditions:
= The vehicle is not connected to power supply
equipment. Climate control
175

=
The high-v oltage battery is not charged suP-
ciently.
With active pre-entry climate control, the charge
level of the high-voltage battery may be reduced,
even if the charging cable connector is connec-
ted.
For cooling, the following functions are activated
as needed:
= Automatic climate control
= Blower
= Seat ventilation
For heating, the following functions are activated
as needed:
= Automatic climate control
= Blower
= Seat heating
= Steering wheel heater
= Panel heating
= Mirror heater
= Rear window heater
= Fragrancing =
Ionisation
Se
tting pre-entry climate control for departure
time (plug-in hybrid)
Multimedia system:
4 Climate menu 5
Pre-entry climate ctrl
Setting a single departure time 
Select ONCE. 
Set a departure time.
Changing the active departure time 
Select the pen icon next to the displayed
depar
ture time. 
Set a departure time.
Setting the week pr
oNle 
Select WEEK PROFILE . 
Set the desired departure times, e.g. every
da
y at 08:00.
Selecting the zone 
Select =. 
Select Driver's seat only.
If t
he Driver's seat only setting is deactivated,
pre-entry climate control will take place for
the entire vehicle.
Activating/deactivating pre-entry climate control
f
or departure time (plug-in hybrid)
Requirements: = The high-voltage battery is charged suP-
ciently.
= The function has been activated via the multi-
media system. 
To activate: se
t the departure time
( page 176).
Pre-entry climate control for departure time
switches on a maximum of 55 minutes before
the selected departure time. It will remain
active for another Nve minutes if the departure
is delayed. 
To deactivate: pr
ess the ; button up or
down.
The following functions will remain active once the
v
ehicle has been started:
= Seat heating 176
Climate control

=
Seat v entilation
= Panel heating
= Fragrancing
= Ionisation Activating/deactivating immediate pre-entry cli-
mat

e control &
WARNING Risk of f
atal injury due to expo-
sure to extreme heat or cold in the vehicle
If persons, particularly children, are subjected
t
o prolonged exposure to intense heat or cold,
there is a risk of severe injury or even death. 
Never leave persons, particularly chil-
dr
en, unattended in the vehicle. Air conditioning of the vehicle interior can con-
tinue f

or up to 50 minutes, e.g. if the journey is
interrupted. The colours of the indicator lamp have the follow-
ing meanings:
= Blue: cooling is activ

ated.
= Red: heating is activated.
= Yellow: the departure time has been preselec-
ted. 
Set the desired temperature using the

Switching the stationary heater/ventilation
on/oM
via t he operating unit &
DANGER Risk of f
atal injury due to poison-
ous exhaust gases
If the tailpipe is blocked or suPcient v
entila-
tion is not possible, poisonous exhaust gases
such as carbon monoxide may enter the vehi-
cle. This is the case in enclosed spaces or if
the vehicle gets stuck in snow, for example. 
Always switch the stationary heater oM in
enclosed spaces wit
hout an air extrac-
tion system, e.g. in garages. 
Keep the tailpipe and the area around
t

he vehicle free from snow when the
engine or the stationary heater is run-
ning. 
Open a window on the side of the vehicle
f

acing away from the wind to ensure an
adequate supply of fresh air. &
WARNING Risk of Nr
e due to hot station-
ary heater components and exhaust gases
Flammable materials such as leaves, grass or
twigs ma
y ignite. 
When the stationary heater is switched
on, mak

e sure that:
= hot vehicle parts do not come into
contact with Oammable materials.
= the exhaust gas can Oow out of the
stationary heater exhaust pipe unhin-
dered.
= the exhaust gas does not come into
contact with Oammable materials. *
NOTE Batt
ery discharge caused by sta-
tionary heater or stationary ventilation
operation Operating the stationary heater or stationary
v

entilation drains the battery. 
Aser heating or v
entilating the vehicle
twice, drive for a longer period of time. Requirements:
= The fuel t

ank is suPciently full.
% Please note that if the tank Nll le
vel is too low,
it can result in function restrictions during
auxiliary heating operation. 
Set the desired temperature using the

cars/connectme/en@GB/#emotions/
S
tartseite.html.
Setting the stationary heater/ventilation via the
multimedia system
Multimedia system: 4 Climate menu 5
Auxiliary heating 
Call up the air conditioning menu
( pag
e 170). 
Select Auxiliary heating .
Selecting the departure time 
Select the time TIME A
XX, TIME B XX or
TIME C XX.
Setting the departure time 
Select the time TIME A
XX, TIME B XX or
TIME C XX. 
Select the pen beside the time. 
Set a time. Setting the stationary heater/ventilation via
r

emote control
Requirements: = The fuel tank is suPciently full.
Switching on immediately 
Press and hold the


To deactivate the departure time: select t he
desired departure time and press and hold
the x button.
OFF will appear on the display. 
To check the status of the active stationary
heat
er: brieOy press the


Take discharged batteries to a
q
ualiNed specialist workshop or to a col-
lection point for used batteries. Requirements:
= One CR2450 lit

hium battery
Mercedes-Benz recommends that you have the
battery replaced at a qualiNed specialist work-
shop. 
Push a pointed object into recess 1. 
Slide battery cover 2 bac
kwards in the direc-
tion of the arrow and remove the empty bat-
tery. 
Insert new battery 3 wit
h the lettering facing
upwards. 
Slide battery cover 2 in t
he opposite direc-
tion to the arrow onto the remote control until
the battery cover engages.
Problems with the remote control for the station-
ar
y heater/ventilation
FAIL