2022 MERCEDES-BENZ E-CLASS CABRIOLET Owners Manual

Ad
aptive Highbeam Assist Plus automatically
switches between thefo llowing types of light:
R Low beam
R Partial high beam
R High beam
R ULTRA RANGE Highbeam ULTRA RANGE Highbeam increases
the bright-
ness of the cone of light tothe legally permitted
maximum.
Pa rtial high beam does not include other road
users in the high beam area. It does not dazzle
th em but enables full high beam illumination for
th e driver apart from theex cluded vehicles.
At speeds below 25 km/h or when there is su1-
cient street lighting:
R The partial high beam and the high beam will
be switched o. automaticall y.
At speeds greater than 30 km/h:
R If no other road users are de tected, the high
beam will switch on automaticall y.
R Ifot her road users are de tected, the partial
high beam will switch on automaticall y.
At speeds abo ve40 km/h:
R If no other road users are de tected on a
st ra ight road, ULTRA RA NGE Highbeam will be
switched on automaticall y.
R Ifot her road users are de tected, the partial
high beam will switch on automaticall y.R
If high ly re0ective signs are de tected, ULTRA
RANGE Highbeam will be switched o. auto-
maticall y.
% The system's optical sensor is located behind
th e windscreen near theove rhead control
panel.
Switc Switc hing A
hing A dap
daptiv
tive Highbeam Assis
e Highbeam Assist Plus t Pluson/o.
on/o.
Switc
Switc hing on
hing on #
Turn the light switch totheà position. #
Switch on the high beam using the combina-
tion switch.
When the high beam is switched on automati-
cally in the dar k, the_ indicator lamp will
light up on the central display section of the
inst rument displa y.
Switc Switc hing
hingo.
o. #
Switch o. the high beam using the combina-
tion switch. 134
134
Light and sight

Se
Se
tting lo
tting lo w beam (v
w beam (v ehicles wit
ehicles wit h MUL
h MULTIBEAM LED
TIBEAM LED
headlam
headlam ps onl
ps only)
y) Multimedia system:
4 © 5
Settings 5
Lights
5 Dipped-beams #
Select Right-side traffic, Left-side trafficor
Automatic. Se
Se
tting t
tting t he e
he ext
xt er
er ior lighting
ior lighting switc
switch-o.
h-o. dela
delay time
y time R
R
eq
eq uir
uir ements:
ements:
R The light switch is in theà position.
Multimedia system: 4 © 5
Settings 5
Lights
5 Ext. light. del. sw. off #
Set the swit ch-o. delay time.
When theve hicle's engine is switched o., the
ex terior lighting will be activated forth e set
time. Switc
Switc
hing t
hing t he surr
he surr ound lighting
ound lighting on/o.
on/o. Multimedia system:
4 © 5
Settings 5
Lights
5 Surround lighting
When Surround lighting is active,theex terior
lighting lights up for 40 seconds aTer theve hicle
is unloc ked. When you start theve hicle, the sur-
ro und lighting is deactivated and the automatic
driving lights are activated. #
Activate or deactivate the function. Int
Int
er
erior lighting
ior lighting A
A
djus
djus ting t
ting t he int
he int er
erior lighting
ior lighting #
1 u Switches there ar interior lighting
on/o.. #
2 p Switches the front right reading
lamp on/o.. #
3 | Switches the automatic interior light-
ing control on/o.. #
4 c Switches the front interior lighting
on/o.. #
5 p Switches the front leT reading lamp
on/o.. A
A
djus
djusting t ting t he ambient lighting
he ambient lighting Multimedia system:
4 © 5
Comfort 5
Ambient lighting
Se Se tting t
tting t he colour
he colour #
Select Colour. #
Set the desired colour.
A A djus
djus ting t
ting t he br
he br ightness
ightness #
Select Brightness. #
Adjust the brightness. Light and sight
135
135

A
A
ctiv
ctiv ating t
ating t he br
he brightness f
ightness f or zones
or zones #
Select Brightness . #
Select Brightness zones .#
Activate or deactivate the function.
or #
Set the brightness forth e desired zones.
A
A ctiv
ctiv ating multi-colour
ating multi-colour ed lighting
ed lighting#
Select Colour. #
Select Multi-colour. #
Select a colour combination.
A
A ctiv
ctiv ating multi-colour
ating multi-colour ed animation
ed animation#
Select Colour. #
Select Multi-colour animat..
The chosen colour combination will change at
prede/ned inter vals.
A
A ctiv
ctiv ating w
ating w elcome lighting
elcome lighting #
Select Colour. #
Select Welcome.
When theve hicle is unloc ked, a special ambi-
ent lighting sequence will run. A
A
ctiv
ctiv ating dependency on air conditioning se
ating dependency on air conditioning se t-
t-
tings
tings #
Select Colour. #
Select Climate .
If ch anges are made tothete mp erature set-
ting in theve hicle, the colour of the ambient
lighting will change brie0y. Switc
Switc
hing t
hing t he int
he inter
erior lighting
ior lighting switc
switch-o.
h-o. delay
delay
time
time on/o.
on/o. Multimedia system:
4 © 5
Settings 5
Lights
5 Int. light. del. sw. off #
Switch the swit ch-o. delay time on or o..
When this function is active, the interior light-
ing lights up for a short time aTer theve hicle
is loc ked. W
W
indscr
indscr een wiper
een wiper s and windscr
s and windscr een w
een washer sy
asher sy s-
s-
t
t em
em Switc
Switc
hing t
hing t he windscr
he windscr een wiper
een wipers
son/o.
on/o. 1
gWindsc reen wipers o.
2 Ä Intermittent wiping, normal
3 Å Intermittent wiping, frequent 136
136
Light and sight

4
° Continuous wiping, slow
5 ¯ Continuous wiping, fast #
Turn the combination switch tothe cor re-
sponding position 1-5. #
Single wipe/w
Single wipe/w ashing:
ashing:pushthe button on the
combination switch in the direction of ar row
1 .
R í Single wipe
R î Wipes with washer 0uid
% Obser vethe no tes on washing theve hicle in a
car wash (/ page 307). R
R
eplacing t
eplacing t he windscr
he windscr een wiper blades
een wiper blades &
W
W ARNING
ARNING Risk of becoming trapped if the
windscreen wipers are switched on while
wiper blades are being replaced
If th e windscreen wipers begin tomo vewhile
yo u are changing the wiper blades, you can be
trapped bythe wiper arm. #
Always switch o. the windscreen wipers
and vehicle before changing the wiper
blades. Mo
Mo
ving t
ving t he wiper ar
he wiper ar ms int
ms into t
o the r
he r eplacement posi-
eplacement posi-
tion
tion #
Switch theve hicle on and then o. again
immediatel y. #
Within around 15 seconds, press and hold the
î button on the combination switch for
appr oximately thre e seconds (/ page 136).
The wiper arms will mo veinto there placement
position.
R R emo emo ving t
ving t he wiper blades
he wiper blades #
Foldthe wiper arms away from the wind-
screen. #
Hold the wiper arm with one hand. With the
ot her hand, turn the wiper blade away from
th e wiper arm in the direction of ar row 1 as
fa r as it will go. #
Slide catch 2inthe direction of ar row 3
until it engages in there mo val position. #
Remo vethe wiper blade from the wiper arm in
th e direction of ar row 4. Light and sight
137
137

F
F
itting t
itting t he wiper blades
he wiper blades #
Insert the new wiper blade into the wiper arm
in the direction of ar row 1. #
Slide catch 2inthe direction of ar row 3
until it engages in the locking position. #
Make sure that the wiper blade is seated cor-
re ctl y. #
Foldthe wiper arms back onto the wind-
screen. #
Switch on theve hicle. #
Press theî button on the combination
switch.
The wiper arms will return totheir original
positions. #
Switch o. theve hicle.
% Check the condition of the wiper blades regu-
lar lyand replace them in theev ent of visible
damage or ongoing smearing.
Maint
Maint enance display enance display
The maintenance display is available only with
standard windscreen wipers. #
Remo veprotective /lm 1from the mainte-
nance displa yson the tips of the ne wly/tted
wiper blades.
When the colour of the maintenance displa ys
ch anges from black toyello w, replace the wiper
blades.
% The duration until the colour changes varies
depending on the usage conditions. 138
138
Light and sight

R
R
eplacing t
eplacing t he windscr
he windscr een wiper blades (MA
een wiper blades (MA GIC
GIC
VISION C
VISION C ONTR
ONTROL)
OL) Mo Mo
ving t ving t he wiper ar
he wiper ar ms int
ms into t
o the r
he r eplacement posi-
eplacement posi-
tion
tion #
Switch theve hicle on and then o. again
immediatel y. #
Within around 15 seconds, press and hold the
î button on the combination switch for
appr oximately 3 seconds (/ page 136).
The wiper arms will mo veinto there placement
position. R
R
emo
emo ving t
ving t he wiper blades
he wiper blades #
T
To br
o br ing t
ing t he wiper blade int
he wiper blade int o position t
o position to be
o be
r
r emov
emov ed:
ed:raise the wiper arm away from the
windscreen and hold it with one hand. With
th eot her hand, turn the wiper blade in the
direction of ar row 1 beyond the point of
re sis tance.
The wiper blade will engage in there mo val
position with a clic k. #
T
To r
o r emov
emov e t
e the wiper blade:
he wiper blade: pressrelease knob
2, pull the wiper blade in the direction of
ar ro w 3 and remo ve.
F
F itting t
itting t he wiper blades
he wiper blades #
Push the new wiper blade onto the wiper arm
in the direction of ar row 1 until release knob
2 engages. Light and sight
139
139

#
Press the wiper blade be yond the point of
re sis tance in the direction of ar row 3 onthe
wiper arm.
The wiper blade will engage with a noticeable
click and mo vefreely again. #
Foldthe wiper arm back onto the windscreen. #
Switch on theve hicle. #
Press but tonî onthe combination switch
(/ page 136).
The wiper arms will return totheir original
positions.
% Check the condition of the wiper blades regu-
lar lyand replace them in theev ent of visible
damage or ongoing smearing. Mirr Mirr
ors
ors Oper
Oper
ating t
ating t he outside mirr
he outside mirr ors
ors &
W
WARNING
ARNING Risk of accident due toadjust-
ing theve hicle settings while theve hicle is
in motion
Yo u could lose control of theve hicle in thefo l-
lowing situations in particular:
R ifyo u adjust the driver's seat, the head
re straint, the steering wheel or the mir ror
while theve hicle is in motion
R ifyo ufa sten your seat belt while theve hi-
cle is in motion #
Before starting theve hicle: in particular,
adjust the driver's seat, head restraint,
stee ring wheel and mir ror,and fasten
yo ur seat belt. &
W
WARNING
ARNING Risk of accident due tomis-
judgement of distance when using the
outside mir ror
The outside mir rors re0ect objects on a
smaller scale. The objects in vi eware in fact
closer than they appear. #
Therefore, alw ays look overyo ur shoul-
der in order toensure that you are aware
of the actual distance between you and
th ero ad users driving behind you. 140
140
Light and sight

F
F
olding t
olding t he outside mirr
he outside mirr or
ors in/out
s in/out #
Brie0y press button 1.
R
R ese
ese tting t
tting t he outside mirr
he outside mirr ors
ors
% Ifth e battery has been disconnected or com-
ple tely dischar ged, the outside mir rors must
be reset. Only then will the automatic mir ror
fo lding function workproper ly. #
Brie0y press but ton1. A
A
djus
djusting t ting t he outside mirr
he outside mirr ors
ors #
Press button 3or4 toselect the outside
mir rorto be adjus ted. #
Press button 2toadjust the position of the
mir ror glass.
Eng
Eng aging t
aging t he outside mirr
he outside mirr ors
ors #
Vehicles without elect rically folding outside
mir rors: manually mo vethe outside mir ror into
th e cor rect position. #
Vehicles with elect rically folding outside mir-
ro rs: press and hold button 1.
Yo u will hear a click and the mir ror will audibly
click into place. The outside mir ror will now be
set tothe cor rect position. A
A
ut
ut omatic anti-dazzle mirr
omatic anti-dazzle mirr or
ors function
s function &
W
WARNING
ARNING Risk of acid burns and poison-
ing due tothe anti-dazzle mir ror electro-
ly te
Electrolyte may escape if the glass in an auto-
matic anti-dazzle mir ror breaks. The electrolyte is hazardous
tohealth and cau-
ses ir rita tion. It must not come into contact
with your skin, eyes, respiratory or gans or
clo thing or be swallo wed. #
Ifyo u come into contact with electrolyte,
obser vethefo llowing:
R Immediate lyrinse the electrolyte
from your skin with water and seek
medical attention.
R If electrolyte comes into contact with
yo ur eyes, immediately rinse them
th oroughly with clean water and seek
medical attention.
R Ifth e electrolyte is swallo wed, imme-
diately rinse your mouth out thor-
oughl y.Do not induce vomiting. Seek
medical attention immediatel y.
R Immediately change out of clo thing
which has been contaminated with
electrolyte.
R If an allergic reaction occurs, seek
medical attention immediatel y. Light and sight
141 141