2022 MAZDA MODEL MX-30 EV brakes

▼Brake System Warning Beep
A warning beep is activated if a
problem with the brake system occurs
and the brakes may not work as
intended. Decelerate the vehicle while
checking the safety of the surrounding
area, and park the vehicle in a safe
place. After stopping the vehicle,
contact an Authorized Mazda Dealer.
▼Brake Override Warning Beep
A warning beep is activated when the
accelerator pedal and brake pedal are
depressed at the same time while
driving. Only depress the brake pedal.
▼Shift Position Warning Beep
A warning sound is activated when the
selector lever position and the shift
position of the vehicle do not match.
Check the selector lever position.
▼Selector Lever Not In P or N
Reminder Warning Beep
A warning sound is activated if the
following operations are performed
while the selector lever is in a position
other than P.
The power switch is switched OFF
while the EV system is operating.
The driver’s seat belt is unfastened
and the driver’s door is opened.
Check the selector lever position.
▼ Electric Parking Brake (EPB)
War n in g Be ep
The warning buzzer is activated under
the following conditions:
The vehicle is driven with the parking
brake applied.
The Electric Parking Brake (EPB)
switch is pulled while the vehicle is
driven.
You attempt to start driving the
vehicle while the conditions for
releasing the Electric Parking Brake
(EPB) automatically have not been
met.
▼
AUTOHOLD Warning Beep
Message is displayed and beep sound
is activated simultaneously for about 5
seconds when using AUTOHOLD
function or when AUTOHOLD switch
is operated.
Because a problem with AUTOHOLD
function has occurred, AUTOHOLD
function does not operate even if
AUTOHOLD switch is operated.

If the message is displayed and the
beep sound is activated
simultaneously, have your vehicle
inspected at an Authorized Mazda
Dealer.
▼Vehicle Problem Warning Beep
If any of the following problems occur,
a warning beep is activated. Check the
information regarding the warning
indication in the instrument cluster or
on the center display.
Brake
fluid amount decreaseElectric Parking Brake (EPB) problemShift control system problemEV System problemCharging system problemApproaching vehicle audible system
problem
▼Reverse Position Warning Beep
The warning beep is activated when
the power switch is switched ON and
the selector lever is in the R position.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-39
MX
-30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07

road when it's mounted on the
vehicle.

Seating capacity means the total
allowable number of vehicle
occupants. Seating capacity is
described on the tire label.

Production options weight is the
combination weight of installed regular
production options weighing over 2.3
kilograms in excess of the standard
items which they replace, and not
previously considered in the curb
weight or accessor y weight, including
heavy duty brakes, ride levelers, roof
rack, heavy duty battery, and special
trim.

Rim is the metal support (wheel) for a
tire or a tire and tube assembly upon
which the tire beads are seated.Tire Maintenance
▼ Tire Maintenance
Improper or inadequate vehicle
maintenance can cause tires to wear
abnormally. Here are some important
maintenance points:
▼Tire
Inflation Pressure
Inspect all tire pressure monthly
(including the spare) when the tires are
cold. Maintain recommended
pressures for the best ride, top
handling , and minimum tire wear. Use
the pressures speci
fied on the vehicle
tire information placard or tire label for
optimum service.
▼ Tire Rotation
To equalize tread wear, rotate the tires
every 16,000 km (10,000 miles) at the
latest or sooner if irregular wear
develops. Mazda recommends to
rotate every 8,000 km (5,000 miles) to
help increase tire life and distribute
wear more evenly.
1. Forward
Do not include (TEMPORARY USE
ONLY) spare tire in rotation.

Inspect the tires for uneven wear and
damage. Abnormal wear is usually
caused by one or a combination of the
following:
Incorrect tire pressure
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
8-26
MX
-30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07

Ve h i c l e L o a d i n g
▼Ve h i c l e L o a d i n g
WARNING
Do not tow a trailer with this vehicle:
Towing a trailer with this vehicle is
dangerous because it has not been
designed to tow a trailer and doing so
will
aff ect the drive system which could
result in vehicle damage.
This section will guide you in the
proper loading of your vehicle, to keep
your loaded vehicle weight within its
design rating capability. Properly
loading your vehicle will provide
maximum return of vehicle design
performance. Before loading your
vehicle, familiarize yourself with the
following terms for determining your
vehicle's weight ratings, from the
vehicle's Safety Certi fication Label and
Tire and Load Information Label:
WARNING
Overloaded Vehicle:
Overloading a vehi cle is dangerous.
The results of overloading can have
serious consequences in terms of
passenger safety. Too much weight on
a vehicle's suspension system can
cause spring or shock absorber failure,
brake failure, handling or steering
problems, irregular tire wear, tire
failure or other damage.
Overloading makes a vehicle harder to
drive and control. It also increases the
distance required for stopping. In cases
of serious overloading , brakes can fail
completely, particularly on steep
grades. The load a tire will carry safely
is a combination of the size of the tire,
its load range, and corresponding
in flation pressure.
Never overload the vehicle and always
observe the vehicle's weight ratings
from the vehicle's Safety Certi fication
and Tire and Load Information labels.
Base Curb Weight is the weight of the
vehicle including all standard
equipment. It does not include
passengers, cargo, or optional
equipment.

Vehicle Curb Weight is the weight of
your new vehicle when you picked it
up from your dealer plus any
aftermarket equipment.

PAY LOA D
Pay l o a d is the combination weight of
cargo and passengers that the vehicle
is designed to carry. The maximum
payload for your vehicle can be found
on the Tire and Load Information label
on the rear door on the driver's side or
door pillar. Look for “THE
COMBINATION WEIGHT OF
OCCUPANTS AND CARGO SHOULD
NEVER EXCEED XXX kg or XXX lbs” for
your maximum payload. The payload
listed on the tire label is the maximum
payload for the vehicle as built by the
assembly plant. If any aftermarket or
dealer installed equipment has been
installed on the vehicle, the weight of
the equipment must be subtracted
Customer Information and Reporting Safety Defects
Tire Information (U.S.A.)
8-28
MX -30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07

Index
A
Accessory Socket....................... 5-39
Actions to take if the remaining high
voltage battery power is completely
depleted................................... 7-16
Active Driving Display................4-24
AC Power Outlet....................... 5-40
Adaptive Front Lighting System
(AFS)........................................ 4-82
Add-On Non-Genuine Parts and
Accessories............................... 8-15
Advanced KeyAdvanced keyless entry
system................................. 3-31
Operational range................ 3-32
Advanced Keyless Entry System... 3-31
Air Intake Selector Icon................5-6
Antilock Brake System (ABS).......4-63
Assist Grips............................... 5-44
AUTOHOLD.............................. 4-57
AUTOHOLD Warning Beep........ 7-39
AUTO Switch.............................. 5-4
B
Battery Replacement........................ 6-20
Speci fications......................... 9-4
Blind Spot Assist......................4-129
Blind Spot Monitoring (BSM)..... 4-87
Canceling operation of Blind Spot
Monitoring (BSM).................4-91
Blind Spot Monitoring (BSM) Warning
Beep.........................................7-40
Bottle Holder............................ 5-43
Brakes
Brake assist.......................... 4-56
Brake override system........... 4-56
Electric Parking Brake (EPB)....4-52
Foot brake............................4-52
Pad wear indicator................4-56
Parking brake....................... 4-52
Warning light........................4-55
Brake Override System............... 4-56
Brake Override Warning Beep.....7-39
Brake System Warning Beep....... 7-39
Break-In Period......................... 3-56
C
Capacities...................................9-4
Cell Phones.............................. 8-16
Center Console......................... 5-46
Charge System............................ 9-3
Charging................................... 3-14
Child Restraint Categories of child-restraint
systems................................ 2-39
Child-restraint precautions.... 2-35
Child-restraint system
installation........................... 2-39
Child-restraint system suitability
for various seat positions....... 2-40
Installing child-restraint
systems................................ 2-41
LATCH child-restraint
systems................................ 2-47
Climate Control System Adjusting the Vents.................5-8
Basic Climate Control System
Operation.............................. 5-7
Climate Control System Operation
Area...................................... 5-3
Climate Control Timer.......... 5-12
Convenient Ways to Use the
Climate Control System........ 5-10
For Your Ride Comfort............ 5-2
Remote Climate Control....... 5-13
Selecting the Air flow Mode..... 5-8
Windshield Defrosting and
Defogging.............................. 5-9
10-2
MX -30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07