2022 HYUNDAI ELANTRA N infotainment

2-5
02
1. Instrument cluster .................................. 4-4
2. Driver’s front air bag ............................. 3-33
3. Engine Start/Stop button ....................... 6-5
4. Infotainment system ............................ 4-39
5. Hazard warning flasher button .............. 8-2
6. Climate control system ............... 5-77/5-887. Passenger’s front air bag ..................... 3-33
8. Glove box .............................................5-106
9. Manual transmission/Dual clutch
transmission .................................. 6-12/6-18
10. Drive mode button ................................ 6-15
11. Parking/View button ............................ 7-59
●● Manual transmission \
Manual transmission \
●● Dual clutch transmission Dual clutch transmission
The actual shape may differ from the illustration.
OCN7N011009NOCN7N011009N
INTERIOR OVERVIEW (II)
CN7 N HMA 2.indd 2-5 2021-09-14  9:29:58

Seats & Safety System3-12
OCN7N031024OCN7N031024
While the engine is running, push either
of the switches to warm the driver’s seat
or front passenger’s seat.
During mild weather or under conditions
where the operation of the seat warmer
is not needed, keep the switches in the
OFF position.
• Manual temperature control Each time you push the switch, the
temperature setting of the seat is
changed as follows:

- Front seat
OFF
LOW ( )HIGH ( )
MIDDLE ( )
• Automatic temperature control The seat warmer starts to
automatically control the seat
temperature in order to prevent
low-temperature burns after being
manually turned ON.

- Front seat
OFF
Ÿ

 

¡
¢0,1
0,1
LOW ( )+,*+
0,''/(
You may manually press the switch to
increase seat temperature. However, it
soon returns the automatic mode again.
• When pressing the switch for more
than 1.5 seconds with the seat warmer
operating, the seat warmer will turn
OFF.
• The seat warmer defaults to the OFF position whenever the Engine
Start/ Stop button is pressed to the
ON position. However, if the Auto
Comfort Control function is ON, the
driver’s seat warmer will turn on
and off depending on the ambient
temperature.
• Auto Comfort Control (for driver’s seat, if equipped)
The seat warmer automatically
controls the seat temperature
depending on the ambient
temperature when the engine is
running. If the seat warmer switch
is pushed, the seat warmer will have
to be controlled manually.To use this
function, it must be activated from
the Settings menu in the AVN system
screen. For more details, refer to the
separately supplied Car Infotainment
System manual.
CN7 N HMA 3.indd 3-12 2021-09-06  2:24:27

4
LCD Display ........................................................................\
.......................... 4-25LCD Display Control ........................................................................\
....................... 4-25
View Modes ........................................................................\
.................................... 4-26Driving Assist mode ........................................................................\
..................... 4-27
Sport view........................................................................\
..................................... 4-27
Trip computer mode ........................................................................\
.................... 4-29
Turn By Turn (TBT) mode ........................................................................\
............. 4-29
Master warning mode ........................................................................\
................. 4-30
User Settings Mode ........................................................................\
......................... 4-31
Trip Computer......................................................................\
................................... 4-37 Trip modes ........................................................................\
.................................... 4-37
Digital speedometer ........................................................................\
.................... 4-38
Vehicle Settings (infotainment system) ..................................................... 4-39Setting Your Vehicle ........................................................................\
....................... 4-39
4. Instrument Cluster
CN7 N HMA 4.indd 4-3 2021-09-14  9:32:02

04
4-5
Instrument Cluster Control
Instrument panel illumination
OUS4041035L OUS4041035L
When the vehicle’s parking lights or
headlamps are on, press the illumination
control switch to adjust the brightness of
the instrument panel illumination.
When pressing the illumination control
switch, the interior switch illumination
intensity also adjusted.
You can adjust the brightness of the
instrument panel illumination form the
User Settings Mode on the LCD display
when the ignition switch is on (‘Lights →
Illumination’). When the vehicle’s parking
lights or headlamps are on, interior
switch illumination intensity and mood
lamps are also adjusted.
If your vehicle is equipped with
additional navigation, please refer
to the infotainment system manual
separately supplied.
WARNING
Never adjust the instrument cluster
while driving. This could result in loss
of control and lead to an accident that
may cause death, serious injury, or
vehicle damage.
• The brightness of the instrument panel illumination is displayed.
• If the brightness reaches to the maximum or minimum level, a chime
will sound.
Gauges and Meters
Speedometer
Normal modeNormal mode••MPH, km/hMPH, km/h
OCN7N041131NOCN7N041131N
N modeN mode••MPHMPH
OCN7N041132NOCN7N041132N
The speedometer indicates the speed of
the vehicle and is calibrated in miles per
hour (MPH) and/or kilometers per hour
(km/h).
CN7 N HMA 4.indd 4-5 2021-09-14  9:32:04

Instrument Cluster4-8
Outside Temperature Gauge
Normal modeNormal modeN modeN mode
OCN7N041129NOCN7N041129NOCN7N041124NOCN7N041124N
This gauge indicates the current outside
air temperatures either in Celsius (°C) or
Fahrenheit. - Temperature range : -40°F ~ 140°F (-40°C ~ 60°C)
The outside temperature on the display
may not immediately change like a
general thermometer not to distract the
driver.
The temperature unit (from °F to °C or
from °C to °F ) can be changed by:
- Settings menu in the infotainment
system screen : Setup → General
Settings → Unit → Temperature Unit →
°F/°C

- Automatic climate control system :
While pressing the OFF button, press
the AUTO button for 3 seconds or
more.
The temperature unit of the instrument
cluster and climate control system will
change at once.
Odometer
Normal modeNormal modeN modeN mode
OCN7040015NOCN7040015NOCN7N041135NOCN7N041135N
The odometer indicates the total
distance that the vehicle has been
driven and should be used to determine
when periodic maintenance should be
performed.
CN7 N HMA 4.indd 4-8 2021-09-14  9:32:19

04
4-9
Distance to empty
Normal modeNormal modeN modeN mode
OCN7040016NOCN7040016NOOSN041023NOOSN041023N
• The distance to empty is the estimated distance the vehicle can be
driven with the remaining fuel.
• If the estimated distance is below 1 mi. (1 km), the trip computer will
display “---” as distance to empty.
Information
• If the vehicle is not on level ground or
the battery power has been interrupted,
the distance to empty function may not
operate correctly.
• The distance to empty may differ
from the actual driving distance as it
is an estimate of the available driving
distance.
• The trip computer may not register
additional fuel if less than 1.6 gallon (6
liters) of fuel are added to the vehicle.
• The distance to empty may vary
significantly based on driving
conditions, driving habits, and
condition of the vehicle.
Fuel economy (Normal mode)
OCN7N041114NOCN7N041114N
The average fuel economy (1) and instant
fuel economy (2) is displayed at the
bottom of the cluster.
Automatic reset
To automatically reset the average fuel
econom

y, select between "After Ignition“
or "After Refueling" from the Settings
menu in the infotainment system screen.
CUSTOM mode settings
OCN7N041136NOCN7N041136N
The main settings of CUSTOM mode is
displayed at the bottom of the cluster.
The CUSTOM mode can be set on the
infotainment system.
Information
For more details on the CUSTOM mode,
refer to “Drive Mode Integrated Control
System” section in chapter 6.
CN7 N HMA 4.indd 4-9 2021-09-14  9:32:23

Instrument Cluster4-28
OBC3N040026OBC3N040026
OBC3N040027OBC3N040027
Lap timer
(1) Best lap
(2) Curr
ent lap
To start (A)
Press the OK button shortly on the
s
teering wheel. The lap timer will start
counting the current lap (2).
To stop (B)
Press and hold the OK button for more
than 1 second on the s
teering wheel
while the lap timer is counting the
current lap (2).
OBC3N040028OBC3N040028
To reset (C):
Press and hold the OK button for more
than 1 second on the s
teering wheel
when the lap timer has stopped counting
the current lap (2).
To save laps:
Press the OK button shortly on the
s
teering wheel while the lap timer is
counting the current lap (2).
From best lap (1) to No.4 lap (3) will be
displayed.
Press the OK button for more than 1
second on the steering wheel to reset the
lap. Then the driver can start a new lap.
Information
Lap timer can be activated regardless of
the mode settings (Drive mode or N mode).
NOTICE
If the N1(N2) button is set to 'Start
lap timer', the N2(N1) button is
automatically set to 'Stop & Reset lap
timer' from the infotainment system.
Then the driver can operate lap timer
using the N1/N2 buttons as the one pair.
For more details, please refer to the
infotainment system manual separately
supplied.
CN7 N HMA 4.indd 4-28 2021-09-14  9:32:48

04
4-31
User Settings Mode
OCN7040038LOCN7040038L
In this mode, you can change the
settings of the instrument cluster, doors,
lamps, etc.
1. Driver assistance
2. Door
3. Lights
4. Sound
5. Convenience
6. Service interval
7. Theme selection
8. Other
9. Language
10. Reset
The information provided may differ
depending on which functions are
applicable to your vehicle.Shift to P to edit settings / Engage parking
brake to edit settings
This warning message illuminates if
y

ou try to select an item from the User
Settings mode while driving.
• Dual clutch transmission
For your safety, change the User
Settings after parking the vehicle,
applying the parking brake and
moving the shift level to P(Park).
• Manual transmission
For your safety, change the User
Settings after engaging the parking
brake.
Quick guide (Help)
This mode provides quick guides for the
s
ystems in the User Settings mode.
Select an item, press and hold the OK
button.
For more details about each system,
refer to this Owner’s Manual.
Information
When the infotainment system is applied,
only the User’s Setting mode on the
infotainment system is supported but the
User’s Setting mode on the instrument
cluster is not supported.
CN7 N HMA 4.indd 4-31 2021-09-14  9:32:56