2022 HYUNDAI ELANTRA N infotainment

06
6-43
N BUTTON
N1/N2 Button Settings
N1 buttonN1 button
OCN7N061208OCN7N061208
N2 buttonN2 button
OCN7N071130L OCN7N071130L N1 button: Left N button,
N2 button: Right N button
The driver can set the N1/N2 button
on the infotainment system screen by
pressing the button approximately 0.8
seconds.
N1 buttonN1 button
OCN7N061230LOCN7N061230L
N2 buttonN2 button
OCN7N061231LOCN7N061231L
Each of the N1/N2 button can be set:
1. N
2. CUSTOM 1
3. CUSTOM 2
4. N  CUSTOM 1
5. N  CUSTOM 2
6. DRIVE MODE
7. Start/Record Lap Timer
8. End/Reset Lap Timer
Information
The same setting can be selected
simultaneously on both N1 and N2 button.
However, if the N1(N2) button is set to
‘(7) Start/Record Lap Timer’, the N2(N1)
button is automatically set to ‘(8) End/
Reset Lap Timer’.
For more details, please refer to the
infotainment system manual separately
supplied.
CN7 N HMA 6.indd 6-43 2021-09-14  9:42:30

Driving Your Vehicle6-44
Drive Mode
Drive mode buttonDrive mode button
OCN7N061254LOCN7N061254L
N1 buttonN1 button
OCN7N061208 OCN7N061208
N2 buttonN2 button
OCN7N071130L OCN7N071130L
Information
If N1 or N2 button is set to ‘Drive mode’
from the infotainment system, the drive
mode can be selected by pressing N1 or N2
button.
For more details, please refer to the
infotainment system manual separately
supplied. The drive mode may be selected
according to the driver’s preference or
road condition.
The system resets to be in the NORMAL
mode, when the engine is restarted.
The mode changes, whenever the N1 or
N2 button on the steering wheel or the
Drive mode button is pressed.
NORMAL
SPORT
ECO
When NORMAL mode is selected, it is
not displayed on the instrument cluster.
DRIVE MODE INTEGRATED CONTROL SYSTEM
CN7 N HMA 6.indd 6-44 2021-09-14  9:42:31

Driving Your Vehicle6-46
SPORT mode
SPORT mode manages
the driving dynamics by
automatically adjusting the
steering effort, the engine and
transmission control logic for
enhanced driving performance.
• When SPORT mode is selected by pressing the DRIVE MODE button, the
SPORT indicator will illuminate.
• When SPORT mode is activated: - The engine RPM will tend to remain raised over a certain length of time
even after releasing the accelerator
- Upshifts are delayed when accelerating
Information
In SPORT mode, the fuel efficiency may
decrease.
N Mode
N1 buttonN1 button
OCN7N061208 OCN7N061208
N2 buttonN2 button
OCN7N071130L OCN7N071130L
N mode may be selected by pressing the
N1 or N2 button.
The system resets to be in the NORMAL
mode, when the engine is restarted.
Information
The driver can set the N1 or N2 button to
N mode on the infotainment system screen.
For more details on N1 or N2 button
setup, refer to “N button” in this chapter.
CN7 N HMA 6.indd 6-46 2021-09-14  9:42:31

06
6-47
N mode
N mode selects the proper
driving mode among SPORT
and SPORT+ for each
components that will effect
the performance of a high-
performance vehicle.
• When N mode is selected, the N indicator will illuminate.
• N mode (SPORT/SPORT+) manages the driving dynamics by automatically
adjusting the steering effort, and the
engine and transmission control logic
for enhanced driver performance.
• When N mode (SPORT/SPORT+) is activated:
- The engine RPM will tend to remain raised over a certain length of time
even after releasing the accelerator
- Upshifts are delayed when accelerating
Information
In SPORT mode, the fuel efficiency may
decrease.
CUSTOM mode
The driver can set the two
types of CUSTOM mode
(CUSTOM 1/CUSTOM 2). In
CUSTOM mode, they can
select the drive mode for each
component they prefer on the
infotainment system screen.
• Engine : NORMAL/SPORT/ SPORT+
• Transmission : NORMAL/SPORT/ SPORT+ (For DCT)
- CREEP START function*1 ON/OFF
• E-LSD (Electronic Limited Slip Differential) : NORMAL/SPORT
• Suspension : NORMAL/SPORT/ SPORT+
• Steering : NORMAL/SPORT/ SPORT+
• ESC (Electronic Stability Control) : NORMAL/SPORT/OFF
• Exhaust sound : NORMAL/ SPORT/ SPORT+
*1 CREEP START function (default setting
ON) : When OFF is set, vehicle will not
start automatically even if the brake
pedal is not pressed in D stop state.
For more details, refer to the
infotainment system manual separately
supplied.
CN7 N HMA 6.indd 6-47 2021-09-14  9:42:32

06
6-51
CAUTION
Please note that using high
performance exhaust sound in a
crowded public area, closed parking
spaces, and/or residential area can
cause disturbance to your neighbors.
Performance Option Settings
OCN7N061219NOCN7N061219N
OCN7N061220NOCN7N061220N
1. You can performance option function from the Settings menu in the
infotainment system screen. : Touch
the N mode (1)→ Swipe the screen to
left (2)
OCN7N061221LOCN7N061221L
2. Touch the performance option (3).
Information
Items of Performance option may
differ depending on the transmission
specification.
PERFORMANCE OPTION (IF EQUIPPED)
CN7 N HMA 6.indd 6-51 2021-09-14  9:42:33

06
6-53
Launch control on and off (For
Manual transmission)
1. Select N mode with ‘N’ button (N mode indicator will illuminate on
the cluster) or select SPORT+ for the
engine mode in CUSTOM mode.
2. Check that the ESC mode is ESC SPORT mode or ESC OFF. If not, press
ESC OFF button to set the ESC mode
to ESC SPORT mode or ESC OFF.
(Electronic Stability Control (ESC)
does not operate when ESC OFF.)
3. Select 'Performance Options → Launch Control' to set engine RPM from the
Infotainment system screen. After
setting RPM, press 'Activate’.
4. Align the steering wheel straight
5. Depress the clutch pedal.
6. Shift to 1st gear.
7. While depressing the clutch pedal with your left foot, quickly and fully
depress the accelerator pedal with
your right foot. Launch control will
be in the ready state. The message
'Launch Control Ready' will appear on
the cluster. If necessary, adjust engine
rpm with +/- switch on the steering
wheel.
8. A smooth, quick release of the clutch pedal within 8 seconds,
while maintaining full depression
of the accelerator pedal will initiate
launching of the vehicle. The message
'Launch Control Active' will appear on
the cluster.
9. Control will deactivate when the accelerator pedal is released.
Launch control on and off (For Dual
clutch transmission)
1. Select N mode with 'N' button (N-mode indicator lights up on
cluster) or select SPORT+ for the
engine mode in custom mode.
2. Check that the ESC mode is ESC SPORT or ESC OFF. If not, press
button to set the ESC mode to ESC
SPORT or ESC OFF.(Indicator lights on
the cluster)(Vehicle dynamic control
device does not operate when ESC
OFF.)
3. Put the transmission gear on 'D'(driving) or 'M' (manual mode)
position.(driver must shift by yourself
when manual mode is selected.)
4. In Launch Control tab of Navigation's Performance Options, select rpm
and press ‘Activate’ button.(N mode
→ Performance Option → Launch
Control) (button lights on when
activated)
5. Align the steering wheel straight.
6. Press brake pedal to maximum with your left foot.
7. When you press the brake pedal with your left foot and quickly press and
hold accelerator pedal with your right
foot, you are ready for launch control.
When it is ready, the text “Launch
Control Ready” is displayed. RPM
value can be adjusted with +/- switch
on the steering wheel.
8. Release your foot gently off the brake pedal within 8 seconds to launch
the vehicle, keeping accelerator
pedal fully pressed. Launch Control
is activated and the text“ Launch
Control Active” is displayed.
9. Launch control is deactivated when you release accelerator pedal.
CN7 N HMA 6.indd 6-53 2021-09-14  9:42:35

06
6-57
N Track Sense Shift (for DCT)
N Track Sense Shift is automatically
activated when dynamic driving
condition with lots of cornering
maneuver is detected. (i.e. Race track
driving). The program enables stress-
free track driving by automatically
shifting down at the entry of corner and
maintains lower gear during cornering
as if you are shifting manually in
professional manner. N Track Sense Shift
provides lower gear when level of driving
aggression increases.
* DCT : Dual clutch transmission
How to set N Track Sense Shift
OCN7N061242LOCN7N061242L
1. Press ‘N Mode → Performance Option → N Track Sense Shift’ on the
infotainment system home screen to
enter the N Track Sense Shift setting
screen.
2. In N Track Sense Shift setup screen, press 'Activate' to select enable/
disable features.

 When the vehicle is released for the
first time, function is activated.

 Active/Deactivated setting is saved
even when the vehicle is restarted.
CN7 N HMA 6.indd 6-57 2021-09-14  9:42:39

06
6-59
N Power Shift (for DCT)
OCN7N061255NOCN7N061255N
When the driver depresses the
accelerator pedal fully (100%) in N mode
for faster acceleration, it controls by (up-
) shifting with minimal energy loss.
N Power Shift can be deactivated by
pressing 'Activate' on the screen. When
N Power Shift is deactivated, vehicle
shifting is similar to normal shifting.
However, it is activated when the engine
is restarted.
* DCT : Dual clutch transmission
N Sound Equalizer
OCN7N061244L OCN7N061244L
Driving sound master volume
OCN7N061246LOCN7N061246L
Tone equalizer
OCN7N061245LOCN7N061245L
N Sound Equalizer provides a more
exciting driving sound to the driver
through the existing speakers installed in
the vehicle.
For detailed information, refer to the
infotainment system manual separately
supplied.
CN7 N HMA 6.indd 6-592021-09-14  9:42:40