#
Insert theke y into the ignition loc k,start the
engine and let it runfo r se veral minutes. #
Before disconnecting the jump leads, switch
on an electrical consumer in your ow nve hi‐
cle, e.g. there ar wind owheater or the light‐
ing. #
Disconnect the negative term inal clamp of
th e jump lead from ear thcontact 4and
th en from negative term inal 2ofthe donor
batter y. #
Disconnect the positive term inal clamp of the
jump lead from positive term inal 5onthe
jump-s tart connection point, and then from
positive term inal 3ofthe donor batter y.
Con tact pr otection co ver1 is automatically
re turned forw ards toits original position by
th e spring forc e and the jump-s tart connec‐
tion point is closed. #
Position the co ver on positive term inal 3of
th e donor batter y. #
Have the battery checked at a qualified spe‐
cialist workshop.
Charging the12 V battery
* NO
TEDama getothe electronics caused
by non-app rove dch arging devices Charging a
fitted battery wi tha battery
ch arge r which has not been appro vedby
Mercedes-Benz can damage the on-board
electronics. #
Only use a battery charge r which has
been appro vedby Mercedes-Benz and
which permits charging the battery
when it is fitted in theve hicle. #
Only charge the battery using the jump-
st art connection point. A battery
charge r specially adapte dfor
Mercedes-Benz vehicles and tested and appr oved
fo r Mercedes-Benz is available as an accesso ry.
Fu rther information is available from any
Mercedes-Benz Service Cent re.Re ad the operat‐
ing instructions foryo ur charge r before charging
th e batter y.
Re charge the battery more frequently if you use
th eve hicle mainly for short trips and/or drive at
low outside temp eratures. #
Connect the battery charge rto the positive
te rm inal and ear thcontact in the same order
as when connecting the donor battery in the
jump-s tarting procedure. %
If a battery is not
fitted and not in service,
yo u should charge itev ery thre e months. This
helps tocounteract self-discharging and pre‐
ve nt damage tothe batter y.
12 V battery care
* NO
TEBattery discharge due toleakage
cur rents Dirty battery
term inal clamps and battery sur‐
fa ces cause lea kage cur rents. This can lead
to the battery discharging. #
Keep the battery term inals and battery
sur faces clean and dr y. *
NO
TEDama getothe battery housing
due toimproper cleaning If
yo u use cleaning agents con taining fuel,
th ese can damage the battery housing. #
Do not use cleaning agents containing
fuel. *
NO
TEDama getothe battery due toself-
dischar ge If dirt
gets into the battery cell, the self-dis‐
ch arge ofthe battery is increased and the
battery can be damaged. #
Only clean the battery with the cell caps
scr ewed in. Obser
vethefo llowing points on battery care: #
Regular lych eck the battery term inals and the
fast ening of the negative cable tothech assis
to ensure that they are firm lyseated. #
Lightly grease the undersides of the battery
te rm inal clamps with acid- resis tant grease. #
Only clean the battery housing with commer‐
cially available cleaning agents. Disconnecting and
removing the star ter bat‐
te ry &
WARNING Risk ofexplosion from hydro‐
ge nga s igniting
There is a danger of hydrogen gas igniting
when charging the battery if there is a short
circuit or spar ksstart toform. Breakdown assis
tance 239
