2021 MERCEDES-BENZ S-CLASS SALOON LONG wheel

R
R
aising t
aising t he v
he vehicle when c
ehicle when c hanging a wheel
hanging a wheel R
R
eq
eq uir
uir ements:
ements:
R There are no persons in theve hicle.
R The vehicle has been prepared for a wheel
ch ange (/ page 470).
R The hub caps ha vebeen remo ved
( / page 470).
Impor tant no tes on using the jack:
R Use only a vehicle-speci/c jack that has been
appr ovedby Mercedes-Benz toraise theve hi-
cle.
R The jack is only designed forra ising and hold-
ing theve hicle for a short time while a wheel
is being changed and not for maintenance
wo rkunder theve hicle.
R The jack must be placed on a /rm, 0at and
non-slip sur face.
R The foot ofthe jack must be positioned verti-
cally under the jack support point. Ru
les of conduct when theve hicle is raised:
R Never place your hands and/or feet under the
ve hicle.
R Never lie under theve hicle. R
Do not start the engine and do not release the
electric parking brake.
R Do not open or close any doors or the boot
lid. #
Using the wheel wrench, loosen the wheel
bolts on the wheel you wish tochange by
about one full turn. Do not unscr ewthe bolts
comple tely. Wheels and tyres
471 471

Po
sition of jack support points &
W
WARNING
ARNING Risk of injury from inco rrect
positioning of the jack
If yo u do not position the jack cor rectly at the
appropriate jacking point of theve hicle, the
jack could tip wi th theve hicle raised. #
Only position the jack at the appropriate
jacking point of theve hicle. The base of
th e jack must be positioned vertically
under the jacking point of theve hicle. *
N
NOOTE
TE Vehicle damage from the jack If
yo u do not position the jack cor rectly at the
appropriate jack support point of theve hicle,
th e jack could tip over with theve hicle raised. #
The jack is designed exclusively for jac k-
ing up theve hicle at the jack support
points. #
Take thera tchet ring spanner out of the tyre-
ch ange tool kit and place it on the he xagon
nut of the jack so that the letters "AUF" are
visible. #
Position support 2of jack 4on jack sup-
port point 1. #
Turn ratchet ring spanner 3clockwise until
jack support 2sits comple tely on jack sup-
port point 1and the base of the jack lies
ev enly on thegr ound. 472
472
Wheels and tyres

#
Continue toturn ratchet ring spanner 3until
th e tyre is raised a maximum of 3 cm o. the
gr ound. #
Loosen and remo vethe wheel (/ page 473). R
R
emo
emo ving a wheel
ving a wheel R
R
eq
eq uir
uir ements:
ements:
R The vehicle is raised.
When changing a wheel, avoid applying any force
to the brake discs, as this could impair the le vel of
comfort when braking.
* NO
NOTE
TEDamage tothre ading from dirt on
wheel bolts #
Do not place wheel bolts in sand or on a
dirty sur face. #
Unscr ewthe uppermost wheel bolt com-
ple tely. #
Screw cent ring pin 1into theth re ad ins tead
of the wheel bolt. #
Unscr ewthere maining wheel bolts com-
ple tely. #
Remo vethe wheel. F F
itting a ne
itting a ne w wheel
w wheel R
R
eq
eq uir
uir ements:
ements:
R The wheel tobe changed is remo ved and the
cent ring pin is scre wed in (/ page 473). &
W
WARNING
ARNING Risk of accident from losing a
wheel
Oiled or greased wheel bolts can cause the
wheel bolts tocome loose, as too can dam-
aged wheel bolts or wheel hub thre ads. #
Never oil or grease theth re ads. #
Intheev ent of damage totheth re ads,
contact a quali/ed specialist workshop
immediatel y. #
Have the damaged wheel bolts or dam-
aged hub thre ads replaced. #
Do not continue driving. #
Obser vethe information on thech oice of tyres
(/ page 465).
Fo r tyres with a speci/ed direction of rotation, an
ar ro w on the side wall of the tyre indicates the
cor rect direction of rotation. Obser vethe direc-
tion of rotation when /tting. #
Slide the wheel tobe mounted onto the cen-
tring pin and push it on. Wheels and tyres
473
473

&
W
WARNI NG
ARNI NGRisk of injury from tightening
wheel bolts and nuts
If yo u tighten the wheel bolts or wheel nuts
when theve hicle is raised, the jack could tip. #
Only tighten wheel bolts or wheel nuts
when theve hicle is on thegr ound. #
Be sure toobser vethe inst ructions and saf ety
no tes on "Changing a wheel" (/ page 465).#
For saf etyre asons, only use wheel bolts which
ha ve been appr oved byMercedes-Benz and
fo rth e wheel in question. #
Tighten the wheel bolts evenly in a diagonal
pattern in the order indicated until they are
/nger-tight. #
Unscr ewand remo vethe centring pin. #
Tighten the last wheel bolt until it is /nge r-
tight. #
Lowe rth eve hicle (/ page 474). Low Low
er
ering t
ing t he v
he vehicle
ehicle aTer
aTera wheel c
a wheel c hange
hange R
R
eq
eq uir
uir ements:
ements:
R The new wheel has been /tted (/ page 473).
* NO
NOTE
TERisk of vehicle jack becoming trap-
ped bythe AIRMATIC system If
th e AIRMATIC system has released air when
ra ising theve hicle, the jack can become trap-
ped when theve hicle is lo wered. #
Start the engine. This adapts theve hicle
le ve l. #
Remo vethe jack from under theve hicle. #
T
To low
o low er t
er the v
he v ehicle:
ehicle: placethera tchet onto
th e he xagon nut of the jack so that the letters
"AB" are visible and turn anti-clockwise. #
Tighten the wheel bolts evenly in a diagonal
pattern in the order indicated 1to5 with
an initial maximum forc e of 80 Nm. #
Tighten the wheel bolts evenly in a diagonal
pattern in the order indicated 1to5 with
th e speci/ed tightening torque of 150 Nm. &
W
WARNING
ARNING Risk of accident due toincor-
re ct tightening torque
The wheels could come loose if the wheel
bolts or wheel nuts are not tightened tothe
prescribed torque. 474
474
Wheels
and tyres

#
Ensure that the wheel bolts or wheel
nuts are tightened tothe prescribed
tightening torque. #
Ifyo u are not sure, do not mo vetheve hi-
cle. Con tact a quali/ed specialist work-
shop and ha vethe tightening torque
ch ecked immediatel y. #
Check the tyre pressure of the ne wly/tted
wheel and adjust it if necessar y.
% The following does not apply if the new wheel
is an emer gency spa rewheel. #
V
Vehicles wit
ehicles wit h a tyr
h a tyre pr
e pressur
essur e monit
e monit or
oring sy
ing sy s-
s-
t
t em:
em: restart the tyre pressure monitoring sys-
te m (/ page 465). Emerg
Emerg
ency spar
ency spar e wheel
e wheel N
No
ot
tes on t
es on t he emerg
he emerg ency spar
ency spar e wheel
e wheel &
W
WARNING
ARNING Risk of accident caused by
incor rect wheel and tyre dimensions
The wheel or tyre size and the tyre type of the
emer gency spa rewheel or spare wheel and
th e wheel tobe replaced may di.er. The emer-
ge ncy spa rewheel or spare wheel can signi/-
cantly impair driving characteristics of the
ve hicle.
To prev ent hazardous situations: #
Drive carefull y. #
Never /t more than one emer gency
spa rewheel or spare wheel that di.ers
in size. #
Only use an emer gency spa rewheel or
spare wheel brie0y. #
Do not deacti vate ESP ®
. #
Have the emer gency spa rewheel or
spare wheel of a di.erent size replaced
at the nearest quali/ed specialist work- shop. The new wheel must ha
vethe cor-
re ct dimensions. %
The emer gency spa rewheel is secured in the
emer gency spa rewheel bag in the boot.
Obser vethefo llowing no tes on /tting an emer-
ge ncy spa rewheel:
R The maximum permissible speed with an
emer gency spa rewheel /tted is 80 km/h.
R Do not /t the emer gency spa rewheel with
snow chains.
R Replace the emer gency spa rewheel aTer six
ye ars at the latest, rega rdless of wear.
R Use the wheel bolts that are included with the
emer gency spa rewheel.
Speci/ed Speci/ed tight
tightening t
ening t orq
orque:
ue: 130 Nm
R Check the tyre pressure of the emer gency
spa rewheel /tted. Cor rect the pressure as
necessar y.
% The speci/ed tyre pressure is stated on the
label of the emer gency spa rewheel. Wheels and tyres
475
475

%
V
Vehicles wit
ehicles wit h a tyr
h a tyre pr
e pressur
essur e monit
e monit or
oring sy
ing sy s-
s-
t
t em:
em: if an emer gency spa rewheel is /tted, the
tyre pressure monitoring system cannot func-
tion reliabl y.Fo r a few minutes aTer an emer-
ge ncy spa rewheel is /tted, the system may
still display the tyre pressure of there mo ved
wheel. Only restart the system again when the
emer gency spa rewheel has been replaced
with a new wheel.
Be sure toalso obser vethefo llowing fur ther rela-
te d subjects:
R Notes on tyre pressure (/ page 462)
R Tyre pressure table (/ page 463)
R Notes on /tting tyres (/ page 465)
R Fitting an emer gency spa rewheel
(/ page 470) 476 476
Wheels and tyres

In addition,
thefo llowing applies tothe speci/ed
ve hicle data:
R Items of optional equipment increase the unla-
den weight and reduce the pa yload.
R Vehicle-speci/c weight information can be
fo und on theve hicle identi/cation plate
(/ page 480). V
V
ehicle dimensions
ehicle dimensions All v
All v
ehicles, ex
ehicles, excep
cep t plug-in h
t plug-in h ybr
ybrid:
id:
V
V ehicle dimensions
ehicle dimensions All models
All models
Ve
hicle lengt h5 289 mm
Ve hicle width including outside
mir rors 2109 mm
Ve hicle width excluding out-
side mir rors 1954 mm
Ve hicle height 1503 mm
Wheelbase 3216 mm Plug-in h Plug-in h
ybr
ybrid:
id:
V
V ehicle dimensions
ehicle dimensions S 580 e
S 580 e
S 580 e 4MA S 580 e 4MA
TIC
TIC
Ve hicle lengt h5 289 mm
Ve hicle width including outside
mir rors 2109 mm
Ve hicle width excluding out-
side mir rors 1954 mm
Ve hicle height 1503 mm
Wheelbase 3216 mm W
W
eights and loads
eights and loads All v
All v
ehicles, ex
ehicles, excep
cep t plug-in h
t plug-in h ybr
ybrid:
id:
R
R oof load
oof load Model
Model
Maximum r
Maximum roof load
oof load
All models 100 kg Missing
values werenot available at the time of
going topress.
Plug-in h
Plug-in h ybr
ybrid:
id: Model
Model
Maximum r
Maximum roof load
oof load
S 580 e
S 580 e 4MATIC High-v High-v
olt
oltag
age batt
e batt er
ery (plug-in h
y (plug-in h ybr
ybrid)
id) N
No
ot
tes on t
es on t he pow
he pow er suppl
er suppl y f
y for v
or v ehicles wit
ehicles wit h a
h a
high-v
high-v olt
oltag
age batt
e batt ery
ery
In accordance with European standard EN
17186:2019, vehicle identi/ers are located on the
ve hicle in thefo llowing places:
R Onthe inside of the soc ket 0ap
R Onthech arging cable connector
In addition, charging stations in European coun-
tries are equipped with ene rgy supp lyidenti/ers.
Yo u can rech arge your vehicle at charging stations
where thech arging station identi/er cor responds
to theve hicle identi/er. Te
ch nical data
491 491

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
Ù
Steering malfunction Stop
immediately See Owner's
Manual *T
he steering is malfunctioning. Steering capability is signi/cantly impaired. &
W WARNING
ARNING Risk of accident if steering capability is impaired
If th e steering does not function as intended, theve hicle's operating saf ety is jeopardised. #
Pull over and stop theve hicle safely as soon as possible, paying attention toroad and tra1c conditions. Do
not continue driving under any circums tances. #
Consult a quali/ed specialis two rkshop. Ù
Rear axle steering cur-
rently malfunctioning *T
herear axle steering is temp orarily una vailable. The turning circle may become wider. #
Stop theve hicle in accordance with the tra1c conditions and restart theve hicle.
If th e display message does not disappear: #
Drive on carefull y. #
Consult a quali/ed specialist workshop.
Ù
Rear axle steering Malfunc-
tion Visit workshop *T
herear axle steering is malfunctioning.
The rear axle has no steering capability.
The steering wheel may be til ted when you drive in a straight line. #
Adapt your speed and drive on carefull y. #
Consult a quali/ed specialist workshop immediatel y.520 520
Display message
s andwarning/indicator lamps