2021 MERCEDES-BENZ EQC SUV wiper blades

Switching
there ar window wiper on/off 1
b Wipes with washer fluid
2 ° Switches on intermittent wiping
3 gSwitches off intermittent wiping
4 b Wipes with washer fluid #
Turn switch 1è tothe cor rect position
1 -4.
The è symbol will appear on the instru‐
ment clus ter when there ar wind owwiper is
swit ched on. Re
placing the windsc reen wiper blades &
WARNING Risk of becoming trapped if
th e windscreen wipers are switched on
while wiper blades are being replaced
If th e windscreen wipers begin tomo vewhile
yo u are changing the wiper blades, you can
be trapped bythe wiper arm. #
Alw ays switch off the windscreen wip‐
ers and ignition before changing the
wiper blades. Moving
the wiper arms into there placement
position #
Switch the ignition on and then off again
immediatel y. #
Within around 15seconds, press and hold
th eî button on the combination switch fo
r appro ximately thre e seconds
(/ page 131).
The wiper arms will mo veinto there place‐
ment position.
Re moving the wiper blades #
Foldthe wiper arms away from the wind‐
screen. 13 2
Light and sight

#
Hold the wiper arm with one hand. With the
ot her hand, turn the wiper blade away from
th e wiper arm in the direction of ar row 1 as
fa r as it will go. #
Slide catch 2inthe direction of ar row 3
until it engages in there mo val position. #
Remo vethe wiper blade from the wiper arm
in the direction of ar row4. Fi
tting the wiper blades #
Inse rtthe new wiper blade into the wiper
arm in the direction of ar row1. #
Slide catch 2inthe direction of ar row 3
until it engages in the locking position. #
Make sure that the wiper blade is seated cor‐
re ctly. #
Foldthe wiper arms back onto the wind‐
screen. #
Switch on the ignition. #
Press theî button on the combination
switch (/ page131).
The wiper arms will return tothe original
position. #
Switch the ignition off. Light and sight
13 3

Maintenance display
#
Remo veprotective film 1 from the mainte‐
nance display on the tip of the newly fitted
wiper blades.
When the colour of the maintenance display
ch anges from black to yellow, the wiper blades
should be replaced. %
The duration until the colour changes varies
depending on the usage conditions. Re
placing the rear window wiper blade &
WARNING Risk of becoming trapped if
th e windscreen wipers are switched on
while wiper blades are being replaced
If th e windscreen wipers begin tomo vewhile
yo u are changing the wiper blades, you can
be trapped bythe wiper arm. #
Alw ays switch off the windscreen wip‐
ers and ignition before changing the
wiper blades. Re
moving the wiper blade #
switch the ignition off. #
Fold wiper arm 2away from there ar win‐
dow until it engages in there placement posi‐
tion. #
Unclip wiper blade 1from wiper arm 2
and remo veit in the direction of ar row 3. 134
Light and sight

R
Do not treat matt or stru ctured deco rative
fo ils with wax.Pe rm anent stains may occur.
Sc ratches, cor rosive deposits, areas af fected by
cor rosion and damage caused byincor rect care
cannot al ways be comple tely repaired. In such
cases, visit a qualified specialist workshop.
Yo u can obtain more information on care and
cleaning products from the manufacturer.
In the case of foil-wrapped sur faces, optical dif‐
fe re nces may occur between the sur faces that
we renot pr otected bya decorative foil af ter
re moving a decorative foil.
% Have wo rkor repairs todecorative foils car‐
ri ed out at a qualified specialist workshop,
e.g. in a Mercedes-Benz Service Centre. Note
s on care of car parts &
WARNING Risk of entrapment if the
windscreen wipers are swit ched on while
th e windscreen is being cleaned
If th e windscreen wipers are set in motion
while you are cleaning the windscreen or
wiper blades, you can be trapped bythe
wiper arm. #
Alw ays switch off the windscreen wip‐
ers and the drive sy stem before clean‐
ing the windscreen or wiper blades. To
avo id damage totheve hicle, obser vethe
no tes on cleaning and care of thefo llowing vehi‐
cle parts:
Wheels and rims
R Use wate r and acid-free alloy wheel cleaners.
R Do not use acidic alloy wheel cleaners to
re mo vebrake dust. This could damage wheel
bolts and brake components.
R Toavo id cor rosion of the brake disks and
brakepads, drive theve hicle for a few
minutes af ter cleaning before parking it. The brake disks and brakepads
warm up and dry
out.
Wi ndo ws
R Clean the windo wsinside and outside with a
damp clo thand with a cleaning agent recom‐
mended for Mercedes-Benz.
R Do not use dry clo ths or abrasive or sol vent-
based cleaning agents toclean the inside of
windo ws.
% Remo veextern al fogging or dirt on the wind‐
screen in front of the multifunction camera.
Otherwise, driving sy stems and driving
saf ety sy stems may be impaired or not avail‐
able (/ page187).
Wi per blades
R Movethe wiper arms into there placement
position (/ page132).
R With th e wiper arms folded out, clean the
wiper blades with a damp clo th.
R Do not clean the wiper blades too of ten. Maintenance and care
307

We
ather information ................................. 273
We b br owsers
Overview...............................................2 84
Wheel change
Fitting a new wheel............................... 340
Lo we ring theve hicle.............................. 341
Preparation............................................ 337
Ra ising theve hicle................................3 37
Re moving a whee l................................. 340
Wheel change
see Emer gency spa rewheel
Wheel rotation........................................... 335
Wheels Care...................................................... 307
Checking............................................... 328
Checking the tyre pressure (tyre
pressure monitoring sy stem)................. 331
Fitting.................................................... 340
Flat tyre.................................................3 12
Inter changing........................................ 335
No ise.................................................... .328
No tes on fitting..................................... 332
Re moving.............................................. 340
Re placing...................................... 332, 337 Re
starting the tyre pressure monitor‐
ing sy stem.............................................3 32
Selection............................................... 332
Snow chains.......................................... 328
St oring..................................................3 36
TIREFIT kit.............................................. 313
Ty re pressure (N otes)............................ 329
Ty re pressure monitoring sy stem
(function)............................................... 331
Ty re pressure table................................ 330
Un usual handling characteristic s.......... 328
Wi -Fi
Setting................................................... 265
Wi ndow airbag............................................. 40
Wi ndow lif ter
see Side windo ws
Wi ndo ws
Car e...................................................... 307
Wi ndo ws
see Side windo ws
Wi ndscreen
Demisting.............................................. 13 9
Re placing the wiper blades.................... 13 2Wi
ndscreen
see Windsc reen
Wi ndscreen washer fluid
No tes....................................................3 50
Wi ndscreen washer sy stem
To pping up............................................. 303
Wi ndscreen wipers
Re placing the wiper blades.................... 13 2
Switching on/of f................................... 131
Wi nter operation
Snow chains.......................................... 328
Wi nter tyres
Setting the permanent speed limit........ 19 9
Wi per blades
Ca re...................................................... 307
Re placing...............................................1 32
Wire lesscharging
Fu nction/no tes..................................... 12 0
Mobile phone......................................... 121
Wire lessvehicle comp onents
Declaration of con form ity....................... .22
Speci fic absor ption rate.......................... 22 Index
447