2021 MERCEDES-BENZ EQA SUV ECO mode

Syst
Syst
em limits
em limits
The braking e.ect of the electric mo tor during
re cuperation in overrun mode may be reduced or
may not be available at all in thefo llowing situa-
tions:
R when the high-voltage battery charge level
increases
R ifth e high-voltage battery is not yet at a nor-
mal operating temp erature
R when driving at speeds close tozero
R in transmission position i
R during and aTer ESP ®
inter venes
In these cases, the desired deceleration is set by
th e brake control system. Also brake with the
service brake if necessar y.
Manuall
Manuall y se
y setting r
tting r ecuper
ecuper ativ
ative deceler
e deceler ation
ation
Yo u can use the steering wheel gearshiT paddles
to manually adjust the intensity of recuperation in
ov errun mode. %
When theve hicle is star ted again, thefo llo w-
ing recuperation le vel is set:
R hÃ: if hÃwas selected pr evi-
ousl y.
R h: if a recuperation le velot her than
hà was selected pr eviousl y.
The following recuperation le vels are available:
R hà Intelligent and anticipa tory recupera-
tion with ECO Assist (/ page 156)
R hq Norecuperation: theve hicle coasts,
ro lls freely
R h Normal recuperation R
h± Increased recuperation: increased
decele ration in overrun mode
R h±± Maximum recuperation: maximum
decele ration in overrun mode #
T
To incr
o incr ease r
ease r ecuper
ecuper ation:
ation:brie0y pull gearshiT
paddle 1. #
T
To r
o r educe r
educe r ecuper
ecuperation:
ation:brie0y pull gearshiT
paddle 2. #
T
To select
o select hÃ: pull and hold gearshiT pad-
dle 1 or2.
The Instrument Displ aysho ws th e currently selec-
te dre cuperation le vel next tothe transmission
position displa y. EC
EC
O Assis
O Assis t function
t function %
ECO Assist is not available in all countries.
Depending on theve hicle's equipment, di.er-
ent events ahead can be de tected.
ECO Assist is active only in hÃ
(/ page 156).
ECO Assist anal yses data forth eve hicle's expec-
te dro ute. This allo ws the system tooptimally 156
156
Driving and parking

Depending on
the drive prog ram selected, thefo l-
lowing vehicle characteristics will change:
R Drive
R Suspension
R Steering
R ESP ®
R Climate control
A A v vailable dr
ailable dr iv
ive pr
e pr ogr
ograms
ams
= Individual
R The following vehicle characteristics are indi-
vidually adjustable:
- Drive
- Suspension
- Steering
C Sport
R Maximum po werav ailability
R Stability but with a sporty, dynamic setup
R Only suitable for good road conditions, a dry
ro ad sur face and a clear st retch of road A
Comfort
R Comfor table driving style
R Balance between traction and stability
R Best balance between e1ciency and per form-
ance for all driving situations
R Recommended for all road conditions
; Eco
R Economical setting of vehicle functions
R Balance between traction and stability
R Recommended for all road conditions
R Restric ted per form ance of the climate control
to increase thera nge (/ page 143)
In heating mode, the windo wsmay mist up
more quickl y.
R Maximum permissible speed limited to
130 km/h
If yo u depress the accelerator pedal be yond
th e pressure point (kickdown), the limit is
ra ised tothe maximum permissible speed.
R When thero ute option Electric Intelligence is
switched on and route guidance is active, a ch
equered 0ag in the speedome ter indicates
th e maximum permissible speed recommen-
ded byactive range moni toring . It is the driv-
er's ownre sponsibility tocomply with them in
order toreach the next scheduled charging
station . N No
ot
tes on t
es on t he r
he roof load displ ay
oof load display Cer
tain drive prog rams and ESP ®
settings are
unsuitable for transporting a roof load.
If one of these drive prog rams is set or selected,
th eW symbol is shown as a warning. When
th is symbol is shown, the selected drive prog ram
is not suitable for transporting a load on thero of.
The following drive prog rams are a.ected:
R Sport
Sport drive prog ram
R Individual
Individual drive program with the Sport ESP ®
setting
% The symbol is also shown in thefo llowing sit-
uations:
R Within theth emes if a cor responding drive
prog ram is sa ved Driving and parking
159
159

*
N
NO
OTE
TE Accelerated ageing of the high-volt-
age battery As a
result of its basic characteristics, the
storage capacity of, and the amount of energy
av ailable from, the high-voltage battery
decreases over the course of its life. Due to
th is, bo th the maximum electrical range that
can be achie vedby theve hicle and its maxi-
mum elect rical output can be impaired.
The following factors could accelerate the age-
ing of the high-voltage batter y:
R frequently fully charging (char gelevel
100%) the high-voltage batter y,especially
when this process is not directly follo wed
by a jou rney
R frequent rapid charging with direct cur rent
(mode 4)
R leaving theve hicle idle for lengt hyperiods
at high ambient temp eratures #
Toavo id accelerated ageing, please
obser vethefo llowing recommendations
when handling the high-voltage batter y. Re
commendations when handling the high-voltage
batter y:
R Every six months, when the outside temp era-
ture is abo ve10 °C, park theve hicle overnight
with a charge leve l below 20%.
R Only charge the high-voltage battery with
direct cur rent (mode 4) if necessar y.
R Char gethe high-voltage battery on average to
a ch arge leve l of 80%. Be yond a charge leve l of
80%, thech arging time is considerably pro-
lon ged.
R If leaving theve hicle idle for lengt hyperiods,
park up theve hicle with a high- voltage battery
ch arge leve l between 30% and 50%. Do not
ke ep the high-voltage battery continuously
connected topowe r supply equipment.
R If leaving theve hicle idle for lengt hyperiods of
time avoid, if possible, high ambient temp era-
tures.
R Check the high-voltage battery's charge level
ev ery six weeks (/ page 180).
R Char gethe high-voltage battery if thech arge
le ve l is below 20%. R
Do not disconnect the 12 V battery even if the
ve hicle is leT idle for a lengt hyperiod. Other-
wise, the condition of theve hicle's high- volt-
age battery cannot be monitored.
Yo u can contribute toreducing theve hicle's
ene rgy consum ption in thefo llowing ways:
R An anticipatory driving style (/ page 154)
R Reduced use of electrical consumers
R Having theve hicle regula rly main tained
The charging time of the high-voltage battery may
ch ange overth e course of its life.
% Depending on the national version, your vehi-
cle is equipped with one of thefo llowing vehi-
cle soc kets.
Yo u can charge the high-voltage battery with
bo th alternating cur rent (mode 2/3) and
direct cur rent (mode 4). 164
164
Driving and parking

Combo 1
vehicle soc ket Combo 2
vehicle soc ket
1 Type 1 or type 2 connection forch arging with
alternating cur rent
2 Socketex tension forch arging with direct cur-
re nt
% When using a CCS (Combined Cha rging Sys-
te m) charging cable tocharge with direct cur-
re nt at a combo vehicle soc ket, bo thvehicle soc
ket connections 1and 2are used for
ch arging.
Charging options forth e high-voltage battery
(mode 2, 3 or 4):
R Charging through recuperation while theve hi-
cle is in motion
R Charging with alternating cur rent when sta-
tiona ry:
- at a mains soc ket (mode 2)
- at a wallbox or charging station (mode 3)
R Charging with direct cur rent when stationar y:
- at a fast charging station (mode 4)
Depending on the count ry-speci/c vehicle equip-
ment and your vehicle's charging cable, single
phase ACcharging is also possible.
Obser vethe di.erent grid requ irements of your
cur rent location when charging. Only use charging
cables which conform tothegr id requ irements.
Consult a quali/ed elect rician or your local grid
operator if you ha veany questions.
It is recommended that youch arge the high-volt-
age battery at a wallbox or charging station due to Driving and parking
165
165

Ov
Ov
er
ervie
vie w of t
w of t he loc
he loc king st
king st atus
atus Loc
Loc
king st
king st a-
a-
tus
tus 3
3 Display
Display Meaning
Meaning
% Lights up
whiteVe
hicle
soc ket
unloc ked,
insert or
re mo vecharg-
ing cable
% Flashes whiteMalfunction
during locking
or unlocking Ov Ov
er
ervie
vie w of t
w of t he c
he char
harging pr
ging pr ocess st
ocess st atus
atus S
S
t
tatus of t
atus of t he
he
c
c har
har ging
ging
pr
pr ocess
ocess 2
2 Displ
ay
Display Meaning
Meaning
# Flashes
orangeConnection is
being estab-
lished
# Flashesgreen Active energy
0ow S S
t
tatus of t
atus of t he
he
c
c har
har ging
ging
pr
pr ocess
ocess 2
2 Display
Display
Meaning
Meaning
# Lights up
orangeInter
ruption in
ch arging
# Lights up
green Charging
process com-
ple
ted
# Flashesred
(for appr ox.
90 s) Ve
hicle mal-
function;
ch arging is
not possible S S
t
tar
ar ting t
ting t he alt
he alt er
ernating curr
nating curr ent c
ent c har
harging pr
ging pr ocess
ocess
(mode 2/3)
(mode 2/3) &
D
DAN
AN GER
GER Risk of death when charging at a
damaged soc ket
The charging process uses high voltage. If
th ech arging cable, theve hicle soc ket or the
mains soc ket are damaged, you could receive
an elect ric shoc k. #
Only use an undamaged charging cable. #
Avoid mechanical damage such as crush-
ing, abrading or driving overth e cable. #
Have a damaged vehicle soc ketre placed
at a quali/ed specialist workshop as
soon as possible. #
Never connect thech arging cable to a
damaged vehicle soc ket. *
N
NOOTE
TE Damage due toove rheating of
ch arging cable and charging cable con-
nector During
thech arging process, thech arging
cable and charging cable connector can heat
up within their permissible limit values. 172
172
Driving and parking

Combo 2 v
Combo 2 v
ehicle socket
ehicle soc ket #
Press charging inter ruption button 2.
or #
Unlock theve hicle.
The charging process is ended. The %indi-
cator lamp 1lights up white. The vehicle
soc ket is unloc ked. #
Remo vethech arging cable connector from
th eve hicle soc ket within 30 seconds.
ATer the 30 seconds ha veelapsed, theve hicle
soc ket will be loc ked again.
% Ifyo u cannot remo vethech arging cable con-
nector, repeat the unlocking procedure. If the
ch arging cable connector is still loc ked, con-
ta ct a quali/ed specialist workshop. #
Close the soc ket co ver and the soc ket 0ap. #
Remo vethech arging cable connector from
th e mains soc ket, or from the soc ket on the
wa llbox/charging station, and st owtheve hi-
cle's charging cable safely in theve hicle
(/ page 163).
% ATer thech arging cable connector has been
disconnected, the% indicator lamp 1on
th eve hicle soc ketre mains lit for some time
before switching o.. S
S
t
tar
ar ting t
ting t he dir
he dir ect curr
ect curr ent c
ent c har
harging pr
ging process ocess
(mode 4)
(mode 4) &
D
DAN
AN GER
GER Risk of death when charging at a
damaged soc ket
The charging process uses high voltage.
If th ech arging cable, theve hicle soc ket or the
mains soc ket are damaged, you could receive
an elect ric shoc k. #
Only use an undamaged charging cable. #
Avoid mechanical damage such as crush-
ing, abrading or driving overth e cable. #
Have a damaged vehicle soc ketre placed
at a quali/ed specialist workshop as
soon as possible. #
Never connect thech arging cable to a
damaged vehicle soc ket. 176
176
Driving and parking

The
following charging times can be selected:
R Off (no departure time)
R Once (XX)
R Week profile #
Select a setting.
Se
Se tting a single depar
tting a single depar tur
ture time
e time #
Select Departure time . #
Select Once (XX). #
Select Z. #
Set a departure time.
Se
Se tting t
tting t he w
he week
eekpr
pro/le
o/le #
Select Departure time . #
Select Week profile. #
Select Z. #
Add new time #
Set the desired departure times, e.g. every
day at 8 a.m. #
Select a. Searc
Searc
hing f
hing for c
or char
harging st
ging st ations
ations #
Select Search for charging stations. #
Enter the sear chterm and select Charging
station.
Se
Se tting t
tting t he maximum c
he maximum c har
harging curr
ging curr ent
ent #
Select Home,Work orStandard . #
Select Maximum charge current. #
Select Maximum, 8 ampsor6 amps.
When the high-voltage battery is charge d, the
ch arging cur rent is limi tedto the selected
amperage.
% The value of the maximum charging cur rent
depends on the /xed value charging cable
which was pr ovided.
% Forch arging at a household soc ket only use a
ch arging cable belonging totheve hicle or a
comparable cable, which conforms toDIN IEC
62752 and does not exceed a maximum
ch arging cur rent of 8 amps.
Se
Se tting t
tting t he maximum c
he maximum c harg
harg e lev
e lev el
el #
Select Home,Work orStandard . #
Select Maximum charge state. #
Set the desired percentage.
The high-voltage battery is charge d up tothe
set percentage as a maximum.
% The percentage can be set in increments of
10%.
A maximum charge leve l of 80% is recommen-
ded. Higher maximum charge leve ls can
diminish the long evity of the high-voltage bat-
te ry ( / page 163).
% As soon as the full charge leve l is reached, a
noti/cation is shown in the media display that
th ech arging process is comple ted and the
journey may be continued.
U
Unloc nloc king t king t he c
he char
harging cable (mode 2, 3 or 4)
ging cable (mode 2, 3 or 4)
When the function is active, thech arging cable is
unloc ked when the maximum charge leve l is
re ached. #
Select HomeorWork. #
Activate or deactivate Unlock charging cable.
A A ctiv ctiv ating or deactiv
ating or deactiv ating location-based c
ating location-based c har
hargingging
If th e function is active and pertinent addresses
ha ve been stored in the navigation destinations, Driving and parking
181
181

Syst
Syst
em limits
em limits
Cruise control may be unable tomaintain the
stored speed on uphill gradients. The stored
speed is resumed when thegr adient evens out.
Increase recuperation in good time on long and
steep downhill gradients. Take particular no teof
th is when driving a laden vehicle. By doing so, you
will make use of the electric mo tor's braking
e.ect tocharge the high-voltage batter y.This
re lie vesth e load on the brake system and pre-
ve nts the brakes from overheating and wearing
to oqu ickl y.
Do not use cruise control in thefo llowing situa-
tions:
R in tra1c situations which requ ire frequent
ch anges of speed, e.g. in heavy tra1c, on
winding roads
R on slippery roads. Accelerating can cause the
drive wheels tolose traction and theve hicle
could then skid.
R when visibility is poor F
F unction of t
unction of t he limit
he limit er
er
The limiter restricts the speed of theve hicle. To
re duce the speed tothe set speed, the limiter
applies the brakes automaticall y.
Yo u can limit the speed as follo ws:
R V Var ar iable:
iable: for a short-term speed restriction,
e.g. in built-up areas
R P
Per
er manent
manent :
:fo r a longer-term speed restric-
tion, e.g. in winter ty remode
Yo u can store any speed abo ve20 km/h up tothe
maximum design speed or up tothe set winter
tyre limit. You can also per form settings while the
ve hicle is stationary if theve hicle has been star-
te d.
Obser vethe no tes on driving systems and your
re sponsibility; you may otherwise failto recognise
dangers (/ page 188).
Display
Display s in t
s in the Ins
he Ins tr
trument Display
ument Display
R È (gre y): variable limi ter is selected but not
yet activated.
R È (0ashes grey ):va riable limi ter is temp o-
rari lypassive.
R È (gre en): variable limi ter is activated. A stored speed appears along with
theÈ dis-
pla y.The segments in the speedome ter light up,
up tothe cur rently stored speed.
If yo u depress the accelerator pedal be yond the
pressure point (kickdown), theva riable limi ter
switches topassive mode. The Limiter passive
message appears in the Instrument Display and
th eÈ display 0ashes.
The variable limi ter is reactivated in thefo llowing
situations:
R Ifth eve hicle speed drops below the stored
speed.
R Ifth e stored speed is called up.
R Ifyo u store a new speed.
Oper
Oper ating cr
ating cr uise contr
uise control or t ol or the v
he var
ariable limit
iable limit er
er &
W
WARNING
ARNING Risk of accident due tostored
speed
If yo u call up the stored speed and this is
lo we rth an your cur rent speed, theve hicle
decelerates. Driving and parking
197
197