2021 KIA SELTOS display

1-4
Turning the system on or off
The following explains how to turn on or off the system. Before
using the system, be sure to read the user's manual for safe and
convenient manipulation.
Turning on the system
1 Turn on the vehicle.
2 When a safety warning message appears, read it
and press Confirm.
A
A
To change the display language, press Language.
Type A
Move lever/button
(
/)
 While listening to the radio, switch
between the stations on the preset
list. Press and hold to search for a
station.
While playing media, change the
track/file. Press and hold to rewind or
fast forward (except for the Bluetooth
audio mode).
Call button
(
)
 Before connection of Bluetooth: Press
to display the Bluetooth connection
window.
After connection of Bluetooth: Press
to display the recent calls list, press
and hold to redial the last number,
and press for an incoming call to
answer it.
On a Bluetooth call: Press to switch
to Call Waiting and press and hold
to switch between the system and
mobile phone.
End Call button
(
)
 During a Bluetooth call, press to end
the call.
Press to ignore a call with the
Bluetooth connected.

1-5
ÝWarning
Driving while distracted can result in a loss of vehicle control
that may lead to an accident, severe bodily injury, or death.
The driver's primary responsibility is the safe and legal
operation of the vehicle, and the use of any vehicle systems,
including the touch screen and steering wheel controls, which
take the driver's eyes, attention, and focus away from the safe
operation of the vehicle, or which are not permissible by law,
should never be used during the operation of the vehicle.
Some functions may not be active while driving to ensure
safety. Those functions run only when the vehicle is stationary.
In order to use them, first stop the vehicle.
When the screen is not displayed, the volume is muted, or
other system failures occur, immediately stop using the
system. When you use the faulty system continuously, it may
cause fire, electric shock, or fatal system failure.
Type B
A
A
The screen may differ depending on the vehicle model and
specifications.
A
A
To set the user profile, note the following.
> See “Using the First
Run Setup (if equipped).”
Turning off the system
To turn off the system while driving, press and hold
the Power button on the panel.
The screen and sound will be turned off.
A
A
To use the system again, press the Power button.
A
A
When a specified period of time elapses after turning off the
vehicle, the system automatically shuts down. When you open
the driver's door, the system immediately shuts down.

1-10
d Displays the specified user profile image. When the image is
pressed, the user profile setting screen appears (if equipped).
> See “Configuring the user profile settings (if equipped).”
e The list of menu items appears.
Edit Home Widgets: Used to edit the types and positions
of widgets on the Home screen.
Edit Home Icons: Used to edit the types of icons on the
Home screen.
User's Manual on Web (QR Code): Displays the QR code
that provides access to the online user manual for the
system.
A
A
The screen may differ depending on the vehicle model and
specifications.
Using the Home screen
The Home screen provides various functions.
A
A
To return to the Home screen from other screens, press
.
Home screen
The Home screen layout is as follows:
ab
c
de
a Current time. Depending on the vehicle model or
specifications, time and date display may vary. Press to access
the time and date settings screen.
> See “Date/Time.”
b System status icons. Status icons are not included in the
screenshots in this guide, because their appearance may
differ depending on the system status or mode.
> See “System
status indicator icons.”
c Displays active widgets. When a widget is pressed, the
corresponding function runs in full screen.
> See “ Editing
widgets on the Home screen.”

1-11
Editing icons on the Home screen
You can see the icon list on the Home screen and change the
locations for icons.
1 At the upper left of the Home screen, press Menu
> Edit Home Icons.
2 To change the location of an icon, press and hold,
and drag the icon to the desired position.
A
A
The screen may differ depending on the vehicle model
and specifications.
A
A
To initialize the positions of icons, press Reset.
Editing widgets on the Home screen
You can edit the types and positions of the widgets to display on
the Home screen.
1 At the upper left of the Home screen, press Menu
>
Edit Home Widgets.
2 Perform any of the following methods:
 To change the widget type, press and hold the desired
widget on
List of widgets and then drag it to Widget
area.
To change the listed order for widgets, press and hold a
widget on
Widget area and then drag it to the desired
position.
ab
a List of widgets
b Widget area
A
A
The screen may differ depending on the vehicle model
and specifications.
A
A
To initialize the types and positions of widgets, press
Reset.

1-12
Using the split screen (if equipped)
You can set to display various information such as map, Radio/
Media info, driving info, and clock on the split system screen.
Opening the split screen
Press the split screen button.
The split screen appears on the right.
AAWhen the Menu button exists at the top of the screen, you
can open the split screen by pressing Menu >
Split Screen.
Seeing the all menus screen
You can see all menus on the Home screen.
Press and gently swipe the Home screen to the left
as shown below.
The all menus screen appears. You can see the list of all functions
of the system.
AA
The screen may differ depending on the vehicle model and
specifications.

Useful functions
Using the First Run Setup
Using the phone projection function Using the driving assist display
Using the climate control system
Using the rear-seat climate control system
Using the Passenger Talk mode in the rear seat Using the Quiet mode in the rear seatUsing the sound mood lampPlaying Sounds of NatureUsing the HD Radio Data
Seeing the driving information Seeing notifications
02

2-2
2 When the First Run Setup screen appears, press
Start.
A
A
To use the default settings without changing the
environment, press Skip.
3 Set the language to display on the screen and
then press Next.
Using the First Run Setup
(if equipped)
You can configure the system settings for each driver when
multiple people are using the vehicle.
In First Run Setup, you can configure the values to display on the
screen such as user name, language, and map display method.
1 When a safety warning message appears, read it,
select the driver image, and then press Confirm.
AAWhen you log in as guest, you cannot configure the profile
settings. To set a different profile, select another user.
A
A
You can register up to 2 users.

2-3
4 Set the keyboard type for text entry and then
press Next.
5 To set the driver’s name, press Rename.
The name change screen appears.
A
A
To proceed with First Run Setup without changing the
driver’s name, press Next.
6 Set the map display method and then press Next.
2D Heading Up: The map is rotated depending on the
driving direction.
2D North Up: Displays the map with the north fixed at the
top.
3D Bird View: The map is rotated depending on the
driving direction and it is displayed in three dimensions.
7 When the First Run Setup screen appears, press
OK.
Displays the Home screen.
AA
To set the detailed user information and operation
environment, press Profile Settings.
> See “Configuring the
user profile settings (if equipped).”