
IntroductionF2
Your HYUNDAI should not be modified in any way. Such modifications may 
adversely affect the performance, safety or durability of your HYUNDAI 
and may, in addition, violate conditions of the limited warranties covering 
the vehicle. Certain modifications may also be in violation of regulations 
established by the U.S. Department of Transportation and other federal or state 
agencies.
CAUTION: MODIFICATIONS TO YOUR  HYUNDAI
Your vehicle is equipped with electronic fuel injection and other electronic 
components. It is possible for an improperly installed/adjusted two-way radio 
or cellular telephone to adversely affect electronic systems. For this reason, we 
recommend that you carefully follow the radio manufacturer’s instructions or 
consult your authorized HYUNDAI dealer for precautionary measures or special 
instructions if you choose to install one of these devices.
TWO-WAY RADIO OR CELLULAR TELEPHONE INSTALLATION  

03
3-55
Main components of the Occupant 
Classification System
•	A detection device located within the 
front passenger seat cushion.
•	 Electronic system to determine 
whether the passenger air bag 
systems should be activated or 
deactivated.
•	 An indicator light located on the 
instrument panel which illuminates 
the words “PASSENGER AIR BAG OFF” 
indicating the front passenger air bag 
system is deactivated.
•	 The instrument panel air bag indicator 
light is interconnected with the OCS.
The OCS is designed to help detect 
the presence of a properly-seated 
front passenger and determine if the 
passenger’s front air bag should be 
enabled (may inflate) or not.
The purpose is to help reduce the risk 
of injury or death from an inflating air 
bag to certain front passenger seat 
occupants, such as children, by requiring 
the air bag to be automatically turned 
OFF.
For example, if a child restraint of the 
type specified in the regulations is on the 
seat, the occupant classification sensor 
can detect it and cause the air bag to 
turn OFF.
Front passenger seat adult occupants 
who are properly seated and wearing the 
seat belt properly, should not cause the 
passenger air bag to be automatically 
turned OFF. For smaller adults it may turn 
OFF, however, if the occupant does not 
sit in the seat properly (for example, by 
not sitting upright, by sitting on the edge 
of the seat, or by otherwise being out of 
position), this could cause the sensor to 
turn the air bag OFF. You will find the “PASSENGER AIR BAG 
OFF” indicator on the overhead console 
panel. This system detects the conditions 
1-4 in the following table and activates or 
deactivates the front passenger air bag 
based on these conditions.
Always be sure that you and all vehicle 
occupants are seated properly and 
wearing the seat belt properly for the 
most effective protection by the air bag 
and the seat belt.
The OCS may not function properly if the 
passenger takes actions which can affect 
the classification system. These include:
•	
Failing to sit in an upright position.
•	 Leaning against the door or center 
console.
•	 Sitting towards the sides of the front 
of the seat.
•	 Putting their legs on the dashboard or 
resting them on other locations which 
reduce the passenger weight on the 
front seat.
•	 Wearing the seat belt improperly.
•	 Reclining the seatback.
•	 Wearing thick clothes like ski wear or 
hip protection wear.
•	 Putting an additional thick cushion on 
the seat.
•	 Putting electrical devices (e.g. 
notebook, satellite radio) on the seat 
with inverter charging.   

Seats & Safety System
3-58
OHI038158
•	NEVER lean on the door or center console or sit on 
one side of the front passenger seat.
OJX1039069
•	Do not sit on the passenger seat wearing heavily 
padded clothes such as ski wear and hip protector.
OJX1039070
•	Do not use car seat accessories such as thick blankets 
and cushions which cover up the car seat surface.
OJX1039071
•	Do not place electronic devices such as laptops, DVD 
player, or conductive materials such as water bottles 
on the passenger seat.
•	 Do not use electronic devices such as laptops and 
satellite radios which use inverter chargers.
OJX1039072
•	If large quantity of liquid has been spilled on the 
passenger seat, the air bag warning light may 
illuminate or malfunction.
Therefore, make sure the seat has been completely 
dried before driving the vehicle.
•	 Do not place sharp objects on the front passenger seat. These may damage the 
occupant detection system, if they puncture the seat cushion.
•	 Do not place any items under the front passenger seat.
•	 When changing or replacing the seat or seat cover, use original items only. 
The OCS has been developed based on using original HYUNDAI car seats only. 
Altering or changing the authentic parts may result in system malfunction and 
increase risk of injury when in collision. Any of the above could interfere with the 
proper operation of the OCS sensor thereby increasing the risk of an injury in an 
accident.    

Infotainment system ........................................................................\
..............5-137USB Port ........................................................................\
............................................. 5-137
An tenna ........................................................................\
..................................... .........5-137
Steering wheel remote controls
 ........................................................................\
....... 5-137
In
fotainment system
 ........................................................................\
........................ 5-
138
Voice recognition
 ........................................................................\
............................. 5-
138
Bluetooth® Wireless Technology
 ........................................................................\
..... 5-139
H
ow vehicle radio works
 ........................................................................\
.................. 5-
139
Infotainment System specifications  ............................................................5-143USB ........................................................................\
.................................................... 5-143
Blue tooth ........................................................................\
.......................................... 5-
144
Trademarks ........................................................................\
.............................5-144 
5  

Convenient features
5-6
 Information
The word “HOLD” is written on the 
button to inform you that you must press 
and hold the button for more than one 
second.
Start-up
For detailed information refer to “Key 
Ignition Switch” in chapter 6.
NOTICE
To prevent damaging the remote key:
•	Keep the remote key away from 
water or any liquid and fire. If 
the inside of the remote key gets 
damp (due to drinks or moisture), 
or is heated, internal circuit may 
malfunction, excluding the car from 
the warranty.
•	 Avoid dropping or throwing the 
remote key.
•	 Protect the remote key from extreme 
temperatures.
Mechanical key
OPD046003
If the remote key does not operate 
normally, you can lock or unlock the door 
by using the mechanical key.
To unfold the key, press the release 
button then the key will unfold 
automatically.
To fold the key, fold the key manually 
while pressing the release button.
NOTICE
Do not fold the key without pressing the 
release button. This may damage the 
key.
Remote key precautions
The remote key will not work if any of the 
following occur:
•	The key is in the ignition switch.
•	 You exceed the operating distance 
limit (about 10 m [30 feet]).
•	 The remote key battery is weak.
•	 Other vehicles or objects may be 
blocking the signal.
•	 The weather is extremely cold.
•	 The remote key is close to a radio 
transmitter such as a radio station or 
an airport which can interfere with 
normal operation of the remote key.    

Convenient features
5-12
Mechanical key
If the Smart Key does not operate 
normally, you can lock or unlock the 
driver’s door by using the mechanical 
key.
To remove the mechanical key from the 
smart key FOB:
OFE048007
Press and hold the release button (1) and 
remove the mechanical key (2). Insert the 
mechanical key into the key hole on the 
door. 
To reinstall the mechanical key, put the 
key into the hole and push it until a click 
sound is heard.
Loss of a smart key
A maximum of two smart keys can 
be registered to a single vehicle. If 
you happen to lose your smart key, 
it is recommended that you should 
immediately take the vehicle and 
remaining key to your authorized 
HYUNDAI dealer or tow the vehicle, if 
necessary.
Smart key precautions
The smart key may not work if any of the 
following occur:
•	The smart key is close to a radio 
transmitter such as a radio station or 
an airport which can interfere with 
normal operation of the transmitter.
•	 The smart key is near a mobile two 
way radio system or a mobile phone.
•	 Another vehicle’s smart key is being 
operated close to your vehicle.
If the smart key does not work correctly, 
open and close the door with the 
mechanical key. If you have a problem 
with the smart key, it is recommended to 
contact an authorized HYUNDAI dealer.
If the smart key is in close proximity to 
your mobile phone, the signal could be 
blocked by your mobile phone’s normal 
operational signals. This is specifically 
relevant when the phone is active such 
as making and receiving calls, text 
messaging, and/or sending/receiving 
emails. When possible, avoid keeping the 
smart key and your mobile phone in the 
same location such as a pants or jacket 
pocket in order to avoid interference 
between the two devices.    

Convenient features
5-30
Vehicle personalization with digital key
The available personalization function in the vehicle is as follows.
SystemPersonalization Item
USM HUD
Position adjustment of image, Information display 
selection, Size and color of speedometer
Lamp Blink number of one-touch signal lamps
Cluster Information display on the cluster, Voice volume, 
Welcome sound
Seat/Mirror Seat position, O/S mirror position, Easy Access
Intelligent driving posture assist (Smart IMS)
Door Automatic door lock/unlock, Two Press Unlock
AVN Navigation
Preferred volume of the navigation system, Recent 
destination
User preset My menu list settings, Radio preset Phone 
connectivity Bluetooth preferential connect
CarPlay/Android Auto/MirrorLink On/Off
Air conditioning Operating 
condition Latest operation setup of the following functions:
Temperature, AUTO, air flow direction, air volume, 
air conditioner, air intake control, SYNC, Front 
windshield defroster, OFF
For more information of personalization, refer to the infotainment system manual.
 CAUTION
If you leave the digital key after locking or unlocking the doors or starting up the 
vehicle with the smart key, the doors can be locked by the central door lock. Please 
carry around the digital key all the time.   

05
5-47
Integrated HomeLink® Wireless Control 
System
The HomeLink® Wireless Control System 
provides a convenient way to replace 
up to three hand held radio-frequency 
transmitters used to activate compatible 
devices such as gate operators, garage 
door openers, entry door locks, security 
systems, and home lighting.
NOTICE
HomeLink® operates while the ignition 
switch is in the ACC or ON position 
for safety reasons. It is to prevent 
unintentional security problems from 
happening when the vehicle is parked 
outside the garage.
 WARNING
Before programming HomeLink® to a 
garage door opener or gate operator, 
make sure people and objects are out 
of the way of the device to prevent 
potential harm or damage. Do not 
use the HomeLink® with any garage 
door opener that lacks the safety 
stop and reverse features required 
by U.S. federal safety standards (this 
includes any garage door opener model 
manufactured before April 1, 1982). 
A garage door that cannot detect an 
object - signaling the door to stop and 
reverse - does not meet current U.S. 
federal safety standards. Using a garage 
door opener without these features 
increases the risk of serious injury or 
death.
For more information, contact 
HomeLink®  at www.homelink.com, or 
call Home-Link customer support at 
1-800-355-3515.
It is also recommended that a new 
battery be replaced in the handheld 
transmitter of the device being trained 
to HomeLink® for quicker training and 
accurate transmission of the radio 
frequency. 1. Programming HomeLink
®
The following steps show how to 
program HomeLink. If you have any 
questions or are having difficulty 
programming your HomeLink buttons, 
refer to the HomeLink website or call the 
HomeLink customer support toll-free 
number. Do this before going back to the 
dealer who sold you the car.
•	
Visit the HomeLink website at: www.
homelink.com. Then at the top of the 
page, choose your vehicle make. Then 
watch the You Tube video, and/or 
access additional website information.
•	 If you choose to access the website 
via your cell phone, scan the QR code.
•	Or call HomeLink customer support 
at 1-800-355-3515 (Please have the 
vehicle make/model and the opener 
device make/model readily available.)