2021 HONDA CR-V Owner's Manual (in English)

Page 593 of 690

HONDA CR-V 2021  Owners Manual (in English) uuMaintenance Under the Hood uCooling System
592
Maintenance
1. Make sure the engine and radiator are 
cool.
2. Turn the radiator cap 1/8 turn counter-
clockwise and relieve  any pressure in the 
cool

Page 594 of 690

HONDA CR-V 2021  Owners Manual (in English) 593
uuMaintenance Under the Hood uTransmission Fluid
Maintenance
Transmission Fluid
Have a dealer check the fluid level and replace if necessary.
Do not attempt to check or change  the transmission fl

Page 595 of 690

HONDA CR-V 2021  Owners Manual (in English) 594
uuMaintenance Under the Hood uBrake Fluid
Maintenance
Brake Fluid
The fluid level should be between the  MIN 
and  MAX  marks on the side of the reserve 
tank.
Specified fluid: Honda Heavy  Duty B

Page 596 of 690

HONDA CR-V 2021  Owners Manual (in English) 595
uuMaintenance Under the Hood uRefilling Window Washer Fluid
Maintenance
Refilling Window Washer Fluid
Check the amount of window washer fluid by looking at the reservoir.
If the level is low, fill

Page 597 of 690

HONDA CR-V 2021  Owners Manual (in English) 596
Maintenance
Replacing Light Bulbs
Headlights
Headlights are LED type. Have an authorized Honda dealer inspect and replace the 
light assembly.
Fog Lights*
Fog lights are LED type. Have an authoriz

Page 598 of 690

HONDA CR-V 2021  Owners Manual (in English) 597
uuReplacing Light Bulbs uTaillights and Back-Up Light Bulbs
Maintenance
Taillights and Back-Up Light Bulbs
When replacing, use the following bulbs.
1.Remove the cover by prying on the edge 
using

Page 599 of 690

HONDA CR-V 2021  Owners Manual (in English) 598
uuReplacing Light Bulbs uRear License Plate Light
Maintenance
Rear License Plate Light
Rear license plate light is LED type. Have  an authorized Honda dealer inspect and 
replace the light assembl

Page 600 of 690

HONDA CR-V 2021  Owners Manual (in English) 599Continued
Maintenance
Checking and Maintaining Wiper Blades
Checking Wiper Blades
If the wiper blade rubber has deteriorated, it will leave streaks, become noisy, and 
the hard surfaces of the blad