2021 GENESIS GV80 Premium Navigation Manual

9
bASIC CONTROLS
TURNING ThE SySTEM ON
The image of this product may be different from the actual product.
1. Press the engine start button. Once the system is turned on,
the booting process will start and the safety warning page is
displayed.
↟Press [Language] to change the language of system display.
↟Press [Driver 1], [Driver 2] or [Guest] to change the profile of
system.
2. Press [Confirm].
,NOTE
↟You cannot operate the system while it is booting up. It may
take some time for all of features of the system boot up.
↟The safety warning page is displayed every time the ACC
is turned on. The displayed warnings are related to safety,
please read thoroughly and comply with the safety warnings.
TURNING ThE SySTEM Off
Press and hold [:/VOL] the wheel on the front seat control key.
To turn the system on again, press [:/VOL] the wheel on the front
seat control key.
,NOTE
Check the volume when turning on the system. Before turning
on the system, adjust the volume to a reasonable level.
Sy STEM RESET
This feature is used to reset the system in the occurrence of an
unforeseen error or problem. Press [MAP] button and [SETUP]
button for 5 seconds.
bASIC C ONTROLS
1 JX1_AVNT_USA_QRG_ENG_MFL71279723.indd 92020-10-27 11:33:28
ENG

10
bASIC CONTROLS
USING CONTROLLER ANd TOUChPAd
Rotate controller to left/right or use touchpad to switch or select
the menu.
ControllerDescription
Rotate controller to left/right to switch
the menu.
Swipe up/down/left/right on touchpad
to switch the menu.
Press touchpad to select the menu.
Write the desired words or gesture on
the touchpad.
Press controller to up/down/left/right
to focus menu or move map position.
UPdATE
For supplementation of system software, addition of new functions,
and renewal of map, update is needed.
1. Press [Setup] > [General] > [Software Information] on the home
screen.
2. After inserting the USB with the update file, press [Update].
3. Update is carried out automatically, and after completion,
system automatically reboots.
,NOTE
↟This product requires regular updates for software
corrections, new functions and map updates. Updating may
require up to 1 hour depending on the data size.
↟Turning off the power or ejecting the USB during the update process
may result in update failure.
1 JX1_AVNT_USA_QRG_ENG_MFL71279723.indd 102020-10-27 11:33:28
ENG

11
TROUbLEShOOTING
Problem: The power does not turn on.
↟Possible Cause: The fuse is disconnected. ↟Countermeasure: -Replace with a suitable fuse. -If the fuse is disconnected again, please contact your dealer.
↟Possible Cause: Device is not properly connected. ↟Countermeasure: Check to see that the device has been properly connected.
Problem: The system does not play.
↟Possible Cause: The vehicle battery is low. ↟Countermeasure: Charge the battery if the problem persists, contact your point of purchase or service center.
Problem: The image colour/tone quality is low.
↟Possible Cause: The brightness, saturation, and contrast levels are not set properly. ↟Countermeasure: Properly adjust the brightness, saturation, and contrast levels through Display Setup.
Problem: Sound does not work.
↟Possible Cause: The volume level is set to the lowest level. ↟Countermeasure: Adjust the volume level.
↟Possible Cause: The connection is not proper. ↟Countermeasure: Check to see that the device has been properly connected.
↟Possible Cause: The device is currently fast-forwarding, rewinding, scanning, or playing in slow mode. ↟Countermeasure: The sound will not work when the device is fast-forwarding, rewinding, scanning, or playing in slow mode.
Problem: The sound or image quality is low.
↟Possible Cause: Vibration is occurring from where the conversion switch has been installed. ↟Countermeasure: The sound may be short circuited and the image distorted if the device vibrates.
Problem: The USB does not work
↟Possible Cause: USB memory is damaged. ↟Countermeasure: Please use after formatting the USB into FAT 16/32, exFAT, NTFS format.
↟Possible Cause: USB memory has been contaminated. ↟Countermeasure: Remove any foreign substances on the contact surface of the USB memory and infotainment system.
↟Possible Cause: A separately purchased USB HUB is being used. ↟Countermeasure: Directly connect the USB memory with the infotainment system on the vehicle.
↟Possible Cause: A USB extension cable is being used. ↟Countermeasure: Directly connect the USB memory with the infotainment system on the vehicle.
↟Possible Cause: A USB which is not a Metal Cover Type USB Memory is being used. ↟Countermeasure: Use standard USB Memory.
↟Possible Cause: An HDD type, CF, SD Memory is being used. ↟Countermeasure: Use standard USB Memory.
↟Possible Cause: There are no music files which can be played. ↟Countermeasure: Only MP3, WMA file formats are supported. Please use only the supported music file formats.
TROUbLEShOOTING
1 JX1_AVNT_USA_QRG_ENG_MFL71279723.indd 112020-10-27 11:33:28
ENG

12
Specification
Specification
Common
Power SupplyDC 14.4 V
Operation PowerDC 9 ~ 16V
Current ConsumptionMax. 6A
Dark Current
(average) Max. 1mA
Operating
Temperature-20 ~ 70 °C
Storage Temperature-40 ~ 85 °C
Dimensions
(Headunit)
232 (W) X 85.2 (H) X 164.5 (D)
mm
Weight (Head unit)1.4kg
Front
Monitor
Screen Size
(Outline Dimension)
361.82 (H) X 112.4 (V) X 12.8
(D) mm (Typ.), (W/PemNut,
W/Cover Glass 1.1T)
Resolution2560 X 720 (14.5”)
Operating MethodTFT, In Plane Switching (IPS),
Active Matrix
Viewing Angle80/80/80/80 (L/R/U/D)
Internal LightingLED
Radio
AM
Tuning Range530 ~ 1710 Khz
Usable Sensitivity35 dBuV
SNR Ratio45 dB
FM
Tuning Range87.5 ~ 107.9 Mhz
Usable Sensitivity10 dBuV
SNR Ratio50 dB
SiriusXM™
Tuning Range2333.465 ~ 2344.045 Mhz
Min. Sensitivity-80dBm
T.H.DMax. 0.2 %
Bluetooth
Supported profile
HFP 1.7/ A2DP 1.3/ AVRCP
1.6 / PBAP 1.2 / MAP 1.2/ SPP
1.2 / BIP 1.2
Supported Bluetooth
Specification4.2
Frequency Range
/Output Power
2402 ~ 2480 Mhz
Max. 4.0 dBm
Number of Channels79
1 JX1_AVNT_USA_QRG_ENG_MFL71279723.indd 122020-10-27 11:33:29
ENG

13
Specification
CDMA
RX
Frequency
Range
869MHz~894MHz(BC0),
1930MHz~1990MHz(BC1)
Min. Sensitivity-104dBm (FER =0.5% under)
TX
Frequency
Range
824MHz~849MHz(BC0),
1850MHz~1910MHz(BC1)
Max. PowerPower Class3(BC0),Power
Class2(BC1), 23dBm~30dBm
LT E
RX
Frequency
Range
1930MHz~1990MHz(B2),
2110MHz~2155MHz(B4),
869MHz~894MHz(B5),
746MHz~756MHz(B13)
Min. Sensitivity
-95dBm @10M(B2),
-94dBm @20M(B4),
-95dBm @10M(B5),
-94dBm @10M(B13)
(Throughput ≥95%)
TX
Frequency
Range
1850MHz~1910MHz(B2),
1710MHz~1755MHz(B4),
824MHz~849MHz(B5),
777MHz~787MHz(B13)
Max. PowerPower Class3 (B2,B4,B5,B13)
20.3~25.7dBm
1 JX1_AVNT_USA_QRG_ENG_MFL71279723.indd 132020-10-27 11:33:29
ENG

*MFL71279723*
1 JX1_AVNT_USA_QRG_ENG_MFL71279723.indd 142020-10-27 11:33:29