4
PRECAUTIONS fOR SAfETy / T AbLE Of CONTENTS
SAfETy NOTES
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER (OR
BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with the arrowhead
symbol within an equilateral triangle is
intended to alert the user about the presence of
uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Always operate the vehicle in a safe
manner. Do not become distracted by
the vehicle while driving and always be fully
aware of all driving conditions. Do not change
settings or any functions. Pull over in a safe and
legal manner before attempting such operations.
To promote safety, certain functions are disabled
unless the parking brake is on.
To reduce the risk of electric shock, do
not remove the cover or back of this
product. There are no user-serviceable parts
inside. Refer servicing to qualified service
personnel.
To reduce the risk of fire or electric
shock, do not expose this product to
dripping or splashing water, rain, or moisture.
When driving your vehicle, be sure to
keep the volume of the unit low enough
to allow you to hear sounds coming from the
outside.
Do not drop it and avoid heavy impacts
at anytime.
The driver should not watch the monitor
while driving. If the driver watches the
monitor while driving, it may lead to
carelessness and cause an accident.
f CC NOTICE (f OR USA)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and the receiver.
- Connect the equipment to an outlet on a
circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference and (2) this device must accept any
interference received, including interference that
may cause undesired operation. Any changes
PRECAUTIONS f OR SAfETy / T AbLE Of CONTENTS
1 JX1_AVNT_USA_QRG_ENG_MFL71279723.indd 42020-10-27 11:33:26
ENG
11
TROUbLEShOOTING
Problem: The power does not turn on.
↟Possible Cause: The fuse is disconnected. ↟Countermeasure: -Replace with a suitable fuse. -If the fuse is disconnected again, please contact your dealer.
↟Possible Cause: Device is not properly connected. ↟Countermeasure: Check to see that the device has been properly connected.
Problem: The system does not play.
↟Possible Cause: The vehicle battery is low. ↟Countermeasure: Charge the battery if the problem persists, contact your point of purchase or service center.
Problem: The image colour/tone quality is low.
↟Possible Cause: The brightness, saturation, and contrast levels are not set properly. ↟Countermeasure: Properly adjust the brightness, saturation, and contrast levels through Display Setup.
Problem: Sound does not work.
↟Possible Cause: The volume level is set to the lowest level. ↟Countermeasure: Adjust the volume level.
↟Possible Cause: The connection is not proper. ↟Countermeasure: Check to see that the device has been properly connected.
↟Possible Cause: The device is currently fast-forwarding, rewinding, scanning, or playing in slow mode. ↟Countermeasure: The sound will not work when the device is fast-forwarding, rewinding, scanning, or playing in slow mode.
Problem: The sound or image quality is low.
↟Possible Cause: Vibration is occurring from where the conversion switch has been installed. ↟Countermeasure: The sound may be short circuited and the image distorted if the device vibrates.
Problem: The USB does not work
↟Possible Cause: USB memory is damaged. ↟Countermeasure: Please use after formatting the USB into FAT 16/32, exFAT, NTFS format.
↟Possible Cause: USB memory has been contaminated. ↟Countermeasure: Remove any foreign substances on the contact surface of the USB memory and infotainment system.
↟Possible Cause: A separately purchased USB HUB is being used. ↟Countermeasure: Directly connect the USB memory with the infotainment system on the vehicle.
↟Possible Cause: A USB extension cable is being used. ↟Countermeasure: Directly connect the USB memory with the infotainment system on the vehicle.
↟Possible Cause: A USB which is not a Metal Cover Type USB Memory is being used. ↟Countermeasure: Use standard USB Memory.
↟Possible Cause: An HDD type, CF, SD Memory is being used. ↟Countermeasure: Use standard USB Memory.
↟Possible Cause: There are no music files which can be played. ↟Countermeasure: Only MP3, WMA file formats are supported. Please use only the supported music file formats.
TROUbLEShOOTING
1 JX1_AVNT_USA_QRG_ENG_MFL71279723.indd 112020-10-27 11:33:28
ENG