4
PRECAUTIONS fOR SAfETy / T AbLE Of CONTENTS
SAfETy NOTES
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER (OR
BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with the arrowhead
symbol within an equilateral triangle is
intended to alert the user about the presence of
uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Always operate the vehicle in a safe
manner. Do not become distracted by
the vehicle while driving and always be fully
aware of all driving conditions. Do not change
settings or any functions. Pull over in a safe and
legal manner before attempting such operations.
To promote safety, certain functions are disabled
unless the parking brake is on.
To reduce the risk of electric shock, do
not remove the cover or back of this
product. There are no user-serviceable parts
inside. Refer servicing to qualified service
personnel.
To reduce the risk of fire or electric
shock, do not expose this product to
dripping or splashing water, rain, or moisture.
When driving your vehicle, be sure to
keep the volume of the unit low enough
to allow you to hear sounds coming from the
outside.
Do not drop it and avoid heavy impacts
at anytime.
The driver should not watch the monitor
while driving. If the driver watches the
monitor while driving, it may lead to
carelessness and cause an accident.
f CC NOTICE (f OR USA)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and the receiver.
- Connect the equipment to an outlet on a
circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference and (2) this device must accept any
interference received, including interference that
may cause undesired operation. Any changes
PRECAUTIONS f OR SAfETy / T AbLE Of CONTENTS
1 JX1_AVNT_USA_QRG_ENG_MFL71279723.indd 42020-10-27 11:33:26
ENG
5
PRECAUTIONS fOR SAfETy / T AbLE Of CONTENTS
or modifications in construction of this device
which are not expressly approved by the party
responsible for compliance could void the user’s
authority to operate the equipment.
FCC Radio Frequency Interference
Requirements (for UNII devices)
High power radars are allocated as primary
users of the 5.25 to 5.35 GHz and 5.65 to 5.85
GHz bands. These radar stations can cause
interference with and/or damage this device.
This device cannot be co-located with any other
transmitter.
FCC RF Radiation Exposure Statement
[For having wireless function (WLAN,
Bluetooth,...)]
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-
located or operating in conjunction with any
other antenna or transmitter.
This equipment should be installed and operated
with minimum distance 20 cm (7.8 inches)
between the antenna and your body. Users must
follow the specific operating instructions for
satisfying RF exposure compliance.
TAbLE Of C ONTENTS
3 How to scan QR code
4 PRecautions foR s afety / table
of contents
4 safety notes
4 fcc notice (foR usa)
6 name and function of eacH
comPonent
6 Head unit
7 fRont seat contRol keyes
8 s teeRing wHeel Remote contRol
9 basic contRols
9 tuRning tHe system on
9 tuRning tHe system off
9 s ystem Reset
10 using contRolleR and toucHPad
10 uPdate
11 tRoublesHooting
12 Specification
1 JX1_AVNT_USA_QRG_ENG_MFL71279723.indd 52020-10-27 11:33:26
ENG
