2021 AUDI Q2 Tire

Doors and windows
® For the sake of the environment

CO

<
O
rN
iv
rN
i—i
o < 00
Used batteries must be disposed of appropri­
ately and must not be discarded with ordinary
household waste.
Note
The new battery must be of the same type as
the original one in the remote control key.
Re-synchronising the remote control key
If the remote control key fails to lock/unlock the
vehicle, it will be necessary to re-synchronise the

system.

•
Press
thed]
button on the remote control.

•
Unlock the driver's door within 30 seconds by
turning the key in the lock
^>page
41.

*•
Press
button [a] or
[â].

Locking and unlocking the vehicle with the
remote control key

Fig.
23 Remote control key/convenience key*: Buttons

•
To unlock the vehicle, press button
® â
o
Fig.
23.

•
To lock the vehicle, press button
(f)
0 once

•
To unlock the luggage lid, press button (5)
•£$

briefly.

•
To open* the boot lid, press and hold button (J)

for at least one second.
The vehicle will be locked again automatically if
you do not open one of the doors or the boot lid
within 45 seconds after unlocking the car. This
function prevents the vehicle from remaining un­
locked if the unlock button is pressed by mistake.
This does not apply if
you
press and hold button
(D
@
for one second or longer.
When you unlock the vehicle, the central locking
system will unlock either the entire vehicle or the
driver's door only, depending on the setting you
have selected on the infotainment system

•=>
page 41.
WARNING
- Read and follow
all
the warnings
•=>
A'n
De-

scription
on page 37.
- Applies to vehicles with anti-theft alarm

system:
Do not leave anyone (especially
chil­

dren) in the car if it is locked from the out­
side and the safelock mechanism* is activa­

ted:
the doors and windows cannot then be
opened from the inside
<=>page
42. Locked
doors could delay assistance in an emergen­
cy, potentially putting lives at risk.

(T)
Note
- Do not use the remote
vehicle is out of sight.
- Applies to automatic g
control key
earbox: The
when the
vehicle
can only be locked when the selector lever is
in position P.
Locking and unlocking the vehicle with the
convenience key
Applies to: vehicles with convenience key

The
doors and the boot lid can be locked and un­
locked without handling the remote control key.

Fig.
24 Driver's door: Locking vehicle with convenience key •
39

Doors and windows

CO

s

rN
rN
t-H
o <
- The central locking switch is still operative
when the ignition is switched off and will
automatically lock the entire vehicle when

the [H
button is pressed.
-The central locking switch inside the vehicle
is not operative if
you
lock the vehicle from
the outside.
© Not
The doors and the boot lid are Locked auto­
matically when the vehicle reaches a speed of
about 15 km/h (Auto Lock)
^>page
37. You
can unlock the vehicle again via the
â
button
in the central locking switch.
Adjusting the settings for the central

locking
system

You
can use the infotainment system to select
which functions are controlled via the central
locking system.

•
Select the following on the infotainment sys­

tem:
|MENU|
button > Car
>
left control button
> Vehicle settings > Central locking.
Doors to unlock - You can select whether all
doors or only the driver's door are unlocked by
the central locking system. The boot lid will also
be unlocked if
you
select all. If
you
select driver's
door on vehicles with convenience key*, only one
door will be unlocked (whichever door you grip by
the handle).
When the driver's door setting is activated, you
can still unlock all the doors and the boot lid by
pressing the
M
button on the remote control key

twice.

Long press to open windows - The convenience
open/close function can be activated/deactivated

•=>
page 47.
Lock when
driving^
- If
you
activate this func­

tion,
the whole vehicle is Locked automatically
when you are driving.
Fold mirrors* - If
you
activate this function, the
exterior mirrors are folded in automatically when
the vehicle is Locked.
Locking and unlocking the doors manually

Fig.
26 Driver's door lock

*m
@

Fig.
27 End face of (open) door: Locking manually
If the central locking system should fail to work,
the doors must be locked/unlocked separately.
Locking and unlocking the driver's door
• To unlock the driver's door, turn the key to the
unlock position
(T)
^>Fig.
26
<>(J).

•
To lock the driver's door, move the selector lev­
er to position
P
(automatic gearbox) and turn
the key to the Lock position (2) once
•=>
A.-

Applies to vehicles with anti-theft alarm system:
Switch on the ignition or press the
\M
button on
the remote control key after opening the driver's
door. Otherwise the alarm will be triggered.
The system will unlock either all the doors or only
one of the doors, depending on the settings you
have chosen on the infotainment system

•=>
page 41. •

1J
This function is not available on all export versions.
41

Driver assist systems
key in use. If you change to a different type
of trailer, you may need to change the maxi­
mum trailer speed setting.
- Information is also provided in the head-up
display*.
- Please note
that
the navigation system (SD

card)*
is immediately no longer available if
the SD card is removed from the SD card
reader.
Driver messages
Applies to: vehicles with camera-based traffic sign
recogni

tion

EJ
Traffic sign recognition: currently unavaila­

ble.
No camera view
This message will appear if the camera view is
obstructed
^>page
108. The system will switch
it­

self off.

EJ
Traffic sign recognition: currently restricted
This message appears, for instance, in the event
of a navigation system fault. The Limited func­
tionality may cause fewer speed limits to be dis­
played (which increases the possibility of an er­

ror).

Traffic sign based speed warning: currently
unavailable. See owner's manual
No warning will be given if the selected warning
threshold is exceeded.
Traffic sign recognition: system fault
The function of the system is impaired; the sys­
tem will be deactivated. Drive to a qualified
workshop soon.
No traffic sign recognised
No relevant navigation data are available, and no
speed limit has been detected.
Traffic sign recognition: outside operational
area
Function unavailable in this country
The vehicLe is being driven in a country outside
the system's operational area.
Rest recommendation
General notes
Applies to: vehicles with rest recommendation
Under certain conditions, the system can detect
that the driver needs to take a break.
At the beginning of a trip, the system monitors
the driver's general steering style. Using this as a
reference, the system continuously compares the
current steering input at speeds of between 60
km/h and 200 km/h. If the evaluation of the
steering input implies a lapse in the driver's
con­

centration,
the system will then recommend a
break
^>page
111,
Instrument cluster display.
The rest recommendation function is designed
for journeys on motorways and major roads.
System limitations
The rest recommendation function may misinter­
pret the steering input in certain driving situa­

tions,
such as the following:
- On twisty roads.
- On rough roads.
- In poor weather.
- During performance driving.
- When the driver's attention is distracted.
Resetting the system
The system is automatically reset if
you...

- switch off the ignition.
- release the driver's seat belt and open the driv­
er's door.
- drive slower than 60 km/h for a while. If you
subsequently increase your speed again, the
system will reevaluate the driving style.

/\
WARNING
- Never drive when you are
tired.
As a driver
you are always responsible for ensuring that
you
are
fit to drive.
- On
Long
journeys, make sure to take
quate breaks at regular intervals.

ade-

- The system cannot always tell if
you
need a
break.
110

Audi connect (infotainment)

CO

< o rN
IN
rN
•-H

00
new version is available at my.audi.com.
You can also have the new navigation data
installed by an Audi deaLer (carries addition­
al charges).
- Further information on the myAudi special
destinations and the map update can be
found online at my.audi.com.
Audi connect (infotainment) for telephones

Applies
to: vehicles with Audi connect (infotainment)
© CAUTION

•
Select: |MENU| button
>
Audi connect
>
left
control button
>
Communication.
The following Audi connect infotainment services
are currently available:
- Creating contacts on your
PC
via your myAudi
account and loading the contacts into the di­
rectory of your MMI system
^>page
187.
- Dictating text messages or e-mails and having
them read out*
^>page
182, Messages.
Audi connect (infotainment) in the media
menu

Applies
to: vehicles with Wi-Fi audio player and Audi connect

(infotainment)

*•
Select: |MENU| button
>
Audi connect
>
left
control button > Entertainment.
- Wi-Fi audio player: To access the media centre
of your player (e.g. smartphone) connected via
Wi-Fi
<=>
page 238.
- Online media and Internet radio: With assis­
tance from the Audi MMI connect app, this
function allows you to access and operate
vari­

ous online media services using the MMI.
A WARNING
Mobile devices, tablet and Laptop computers
and devices of
a
similar weight can only be
operated safely when the vehicle is stationary.
Like any Loose object, they can be catapulted
through the vehicle in an accident and cause
serious injuries. Always make sure that such
devices are securely stowed while you are

driving.

Please always observe the information
=>®
in
Wi-Fi hotspot on page 202.
- Also refer to
opage
204, General notes on
Audi connect (infotainment).
- Please contact an Audi dealer for more in­
formation on Wi-Fi audio players and for a
list of supported devices.
Further options

Applies
to: vehicles with Audi connect (infotainment)

•
Select: |MENU| button
>
Audi connect
>
right
control button.
The following options are available in the over­
view of the Audi connect infotainment services:

Login*

Refer to
^>page
196, Logging into myAudi in the
vehicle.
Connection manager
Refer to
^>page
257.
Licence periods
The validity and the time remaining on your licen­
ces is displayed. If the Licence expiry warning
function is switched on
(vj,
a message will be dis­
played before the licence expires.
Refresh
The content of the Audi connect infotainment
service selected or the entire Audi connect (info­
tainment) list is updated.
Wi-Fi hotspot

Applies
to: vehicles with Wi-Fi hotspot

You
can
use
your MMI system as a Wi-Fi hotspot
for connecting to the Internet on up to eight Wi-
Fi
devices.
Small, light Wi-Fi
devices
that are not
permanently attached to the vehicle must only
be operated from the rear seats while the vehicle
is moving.
Important: The ignition must be switched on.
201

Navigation
Adjust route*: Move your finger
over
the MMI
touch padVrotary pushbutton to adjust the route
on the overview map.
Map settings

Applies
to: vehicles with navigation system

•
Press the
|NAV/MAP|
button repeatedly until
the map is displayed.

•
Select: right control button > Map settings.
Depending on the function seLected, you can use
the following settings:
Map colours
day/night: The map is displayed with a
Light/dark

background colour.
automatic: The colour of the map changes to
match the current light conditions (e.g. from day
to night when driving through tunnels).
Map display
Standard: Refer to
opage
219, Fig. 182.
Google Earth*: Refer to
^>page
222, Fig. 183.

Traffic*1);
Refer to
^>page
225, Fig. 187.
Map orientation
destination: The map indicates the destination
and is set to face north.
2D driving position/2D north map: The map de­
picts the vehicle's current position. The map is
set to face the direction of travel or north.
3D driving position*: The current vehicle
posi­

tion is displayed in a three-dimensional map, and
the map is set to face the direction of
travel.
If
the map scale is more than 100 km, the map is

set to
face north.
overview: The entire route from the vehicle
posi­

tion to the final destination or next stopover is
displayed on the map. The map scale varies ac­
cording to the Length of the route and is adapted
automatically. The map is set to face north.
Route information
The display of route information such as the
street you are currently on, upcoming turn-offs,
traffic information or special destinations on the
current route can be switched on/off.
Automatic zoom

on:
The map scale is adjusted automatically ac­
cording to the category of the road you are on
(motorway, major
road,
other road) to ensure

that
you always have the best possible overview
of the route ahead. When there is an upcoming
turn-off, the map display will also be automati­
cally adjusted so that you have a more detailed
view.
intersection: When route guidance is active and
there are upcoming turn-offs, the map dispLay
will temporarily switch to a more detailed scale
so that the road layout can be identified more
easily.
off: The map scale you have set will remain
unal­

tered.

Map content
The dispLay of map content such as weather in­

formation,
traffic information or favourite desti­
nations can be switched on and off.
The weather* is shown on the map if the scale is
set to 5 km or more
^>page
216, Fig. 179.

CO

rN
IV
rN
t-H
o <
x)
This function is not available in the Mexican market.
221

Navigation
The
new
maps
can now be
used
for
navigation.
© CAUTION
If
you
cancel
a
map
update download,
the da­

ta already downloaded
is
permanently
de­

leted.
The
appropriate update package can
be

downloaded again
by
selecting
the
]MENU|

button > Settings > left control button
>
Sys­
tem maintenance > System update.
© Note
- Please always note
the
information
in the

chapter
^>page
191,
Audi connect (infotain­

ment).

- Because
of
the high level
of
data usage
when downloading large country update
packages
or the
entire package,
we
recom­
mend that
in
these cases you download
the

data
on
your computer from your myAudi
account, save them
on an
SD card
and
then
import them
to
your
MMI
system. Further
information
can
be found
on the
Internet
at

my.audi.com.
- Please always note
the
information
in the

chapter
^>page
204,
General notes
on
Audi
connect (infotainment).
myAudi special
destinations
Introduction

Applies
to:
vehicles with navigation system
You
can
import your myAudi special destinations
in
two
ways:
- Importing myAudi special destinations
via the

online update*
^page
224.

- Importing myAudi special destinations
to the

MMI using
an SD
card. Further information
can

be found
on the
Internet
at
my.audi.com.
myAudi special destinations (online
update)

Applies
to:
vehicles with navigation system
and
Audi connect

(infotainment)

You
can download your myAudi special destina­
tions from your myAudi account while
in the
ve­
hicle
and
use them
for
route guidance.
Important:
You must have a myAudi account and have stored
myAudi special destinations.
You must have already sent myAudi special desti­
nations from myAudi
to
your vehicle.
This function
is not
available
in the
Mexican
market.

•
Select:
|NAV/MAP|
button > left control button
> Special destinations
>
myAudi special desti­
nations.

•
If
you
have already imported myAudi special
destinations, select
the
right control button
>

Import myAudi special destinations.

•
Log in
with your myAudi user data/myAudi
PIN

if necessary.
The
update sources available will
be listed
on the
infotainment display.

•
Select and confirm Online update.
Selecting myAudi special destinations
to

import
- SeLect
all the
myAudi special destinations
de­

sired from
the
list
((vft.

- Select and confirm Start download.
Starting download
The size
of
the myAudi special destinations selec­
ted
is
shown
on the
infotainment dispLay.
- Confirm
the
download again
by
selecting Start
download.
The myAudi special destinations will
be
downloa­

ded,
and the
download status will
be
shown
on

the infotainment display.
- To finish importing
the new
myAudi special
destinations, confirm
the
update
by
selecting
OK.
•

224

Media

i)
Note
Playback cannot be guaranteed if the CD/DVD
contains audio/video files with a high data

rate.

CD drive
Applies to: vehicles with CD drive
Jukebox
Applies to: vehicles with jukebox

Audi
multimedia

Fig.
194 CD drive
The CD drive is located in the glove
box@
^>page
10, Fig. 2.
- To load a CD: The
CD
will be drawn in automati­
cally. Insert
the
CD (text facing upwards) into

the CD slot
©oF/g.
194, holding it straight.
- Automatic playback: Playback starts automati­
cally when a
CD
with supported audio files

^>page
250,
CD
drive is inserted.
- To eject a CD: Press button ®
^>Fig.
194.
After it has been ejected, the
CD
will automati­
cally be pulled back into the CD player after
about ten seconds if it is not removed from the
CD slot.
The
CD
drive is started and operated via the MMI

^>page
243, Playing media.
CAUTION
- Never use any force to push a CD into the

drive.
The
CD
will be drawn into the slot au­
tomatically.
- Do not insert any CDs with stickers into the
media drive. The stickers could become de­
tached from the CD and damage the drive.
© Note
After you have filled the jukebox with music or
videos, for example from your
SD
card, you can
play them directly from the jukebox. The jukebox
has approximately 10
GB
of storage.

•
Press the |MEDIA| button. Press the left control
button repeatedly until the source overview

^page
243 is displayed. SeLect and confirm
Jukebox.
Filling
the
jukebox
- Press the |MEDIA| button. Press the left control
button repeatedly until the source overview

*=>page
243 is displayed. SeLect one of the
fol­

lowing sources to copy to the jukebox: SD

card*,
CD-ROM*, DVD-ROM*, USB storage de­

vice*.

Important: The media centre (e.g. tracks, al­
bums) must be open.
- To select an entry: Select an entry from the
media centre. SeLect: right control button >
Copy to jukebox
>
This entry or Entire list.
Important: The playlist must be open. Refer to

ï>
page 246.
- To choose a track: Select the track currently be­
ing played. Select: right control button
>
Copy
to jukebox
>
This track/Entire album
or
This
artist.
Important: A video file must be playing.
-Select: right control button > Copy to jukebox.
The copying procedure will start and its status
will be shown on the MMI.
- To hide the copying procedure: Select and
con­

firm Continue copying in background. The
copying procedure will be hidden.
- To cancel the copying procedure: Select and
confirm Cancel copying procedure. Or: Remove
the source from which you are currently import­
ing files. Files that have already been copied
will remain stored. •
Playback cannot be guaranteed if the CD
con­

tains audio files with a high data rate.
236

Media
Important: Copying must be in progress in the
background.
- To display the copy procedure: SeLect: right
control button
>
Active copy procedure.
During the copying procedure, the audio files are
automatically sorted according to the categories
in the media centre based on the metadata stor­
ed for the files
^page
244. The video files cop­
ied can be found in the Videos category of the
media centre.
Playing from the jukebox
Important:
The
jukebox must contain audio/vid­
eo files
opage
236, Filling the jukebox.
The jukebox is called up and operated via the

MMI
®
<>page
243, Fig. 199.
Displaying the jukebox memory capacity
SeLect: right control button
>
Jukebox memory
capacity. Information on the jukebox memory ca­
pacity and the number of stored tracks will be

displayed.

Deleting tracks from the jukebox1'
Important:
The
jukebox must contain audio/vid­
eo files.
- Delete entry: Select an entry from the
juke­

box's media centre. SeLect: right control button
> Delete from jukebox
>
This entry or Entire
list.
- The status of the deletion process will be
shown on the MMI. During the deletion process
the playback of the jukebox is interrupted; it is
started again automatically once the deletion
process has been completed.
(7) CAUTION
Only copy audio/video files while the engine is

running;
otherwise the vehicle battery will be
discharged
© Note
For legal reasons it is not possible to copy
tracks from audio CDs onto the jukebox

1)
Not in the Playback view.
- Files that have already been copied are de­
tected automatically and cannot be copied
to
the
jukebox again.
- It is not possible to play audio/video files*
in the CD/DVD* drive while they are being

copied.

- For legal reasons there is no export function

for
the jukebox.
- Files or tracks that do not include stored
metadata are listed as Unknown. Audi rec­
ommends that you mark the audio files with
the corresponding metadata (e.g. ID3 tags).
- When handing over your vehicle e.g. to a
new buyer, reset the jukebox to the factory
settings
^>page
256.
Bluetooth audio player
Applies to: vehicles with Bluetooth

You
can use the Bluetooth audio player to play
music
from
your Bluetooth-enabled
device
(e.g.
smartphone) wirelessly via the MMI.
Important: To connect a Bluetooth device, the
vehicle must be stationary and the Bluetooth
function of your Bluetooth device and the Blue­
tooth audio player
^>page
258 function of the
MMI system must be switched on.
- To connect a Bluetooth device: Press the
|MEDIA| button. Press the left control button
repeatedly until the source overview is dis­

played.
Select and confirm Bluetooth audio
player
© ^>page
243, Fig. 200.
- You may need to select and confirm Not
con­

nected > Connect Bluetooth audio player. The
system will start searching for Bluetooth
devi­

ces.
Follow the instructions given by the MMI.
- Select and confirm the desired Bluetooth de­
vice from the List. The MMI will generate a PIN
to establish the connection.
- Select and confirm Yes.
- Enter the PIN on your Bluetooth device to es­
tablish a connection. Or: If the PIN is already
being displayed on your Bluetooth device,
please confirm it on the device. You have about
30 seconds to enter the PIN. •
237