2021 AUDI Q2 ignition

Multi
Media Interface

Multi
Media Interface
Notes on traffic safety
You should only use certain infotainment system
functions, e.g.
entera
navigation destination,
while the vehicle is stationary. Always be pre­
pared to stop operating the infotainment system
in the interest of your own safety and that of
oth­

er road users.
A WARNING
Only operate the infotainment system when
the traffic conditions allow you to do so safely
and when you can maintain proper control of
your vehicLe - risk of accident!

(T)
Note
Certain functions are not available while the
vehicle is in motion.
Introduction
The Multi Media Interface (MMI) combines
dif­

ferent communication, navigation* and
enter­

tainment systems in your Audi. You can operate
your MMI system via the MMI control console,
the multi-function steering wheel or the speech
dialogue system*.

d>^3
ZLMH®

Fig.
140 MMI control console
Overview of MMI control console

(T)
Rotary pushbutton with joystick

function*
153,
157
© MMI touch
pad*
155
(D
Left controL button 154

0
Right control button 154
(D Buttons for calling up menus di­
rectly 154
(6)
IMENU1
button
(7)
IBACKI
button
154
153
MMI ON/OFF button
with joystick function
How to use

Fig.
141 MMI ON/OFF button with joystick function
Switching MMI on/off: The MMI can be switched
on/off manually.
-To switch on manually: Briefly press the ON/
OFF
button
(D^F/g.
141.
Or. Press the
[MENU]

button (6)
^>page
152, Fig. 140 or one of the
buttons for calling up menus directly (J).
- To switch off manually: Press and hold the ON/
OFF
button
®^>F/g.
141 until the MMI
switches off. The MMI system will not be
switched on automatically when the ignition is
switched on if it was turned off manually the
last time it was operated.
Other functions:
- To adjust the volume: Turn the ON/OFF button

Ql^Fig.
141.
- Mute: Briefly press the ON/OFF button
(Î)

*Fig.
141.
- To select the previous/next function (e.g. ra­
dio station/track): Briefly press the ON/OFF
button
(i)t>Fig.
141 to the left KM or right
WH.

-To rewind/fast forward (e.g. track): Press and
hold the ON/OFF button
(T)^Fig.
141 to the

left KM
or right»!.
A WARNING
The audio system volume should be set at a
level which enables you to hear external
sig­

nals (such as the sirens of police and
152

Speech dialogue system
Speech dialogue system
How to use the speech
dialogue system
Applies to: vehicles with speech dialogue system

You
can operate many infotainment functions
conveniently by voice.
Important: The ignition and the MMI system
must be switched on
^>page
152, you must not
be talking on the phone, and the parking aid
must not be active.

•
To switch on: Briefly press the
0
button (J)

^>page
17, Fig. 12/(3)
^>page
18, Fig. 14 on
the multi-function steering wheel and give a
spoken command after the beep signal.

*•
To switch off: Press and hold the
0
button for
several seconds. Or: Press the
0
button.

•
To pause: Say the command Pause. To end the

pause,
press the
S
button.

•
To make a correction: Say the command Cor­

rection.

Input help
The system guides you through the input routine
with cues and messages.
- Input help messages on screen: After the
speech dialogue system is switched on, a selec­
tion of possible commands will be shown. The
command display can be switched on or off as

required.
Select:
|MENU|
button
>
Settings >
left control button > MMI settings
>
Speech
dialogue system.
- Spoken input help
cues:
To have the system
play the commands currently possible, switch
on the speech dialogue system and say Help.
How to help the system understand you
Speak clearly in a normal volume. Speak louder if
you are driving fast.
Speak in a normal tone without long pauses.
Close doors, windows and sun roof* to reduce
background noise. Make sure that passengers are
not talking when you say a command.
Keep the air outlets of the air distribution system
pointed away from the microphone, which is fit­
ted in the vicinity of the front interior lights in
the headliner.
The system should only be operated by the driv­
er, since the handsfree microphone is directed
towards the driver.
Other settings
Refer to
^>page
262.
© No
-The dialogue is paused when an incoming
telephone call is received; you can continue
the dialogue by ignoring the
call.
If
you
an­
swer the
call,
the dialogue will be cancelled.
- No navigation cues* or traffic announce­
ments are played when a dialogue is
run­

ning.

- You can select an entry from a list both via
the speech dialogue system and using the
rotary pushbutton.
- The speech dialogue system does not sup­
port commands in Arabic, Norwegian or
Hungarian.
Notes on the overviews
of commands
Applies to: vehicles with speech dialogue system
The following overviews show you the commands
that you can give to operate the MMI via the
speech dialogue system. •

A WARNING

- Please direct your full attention to the road
at all times! As the driver, you have full re­
sponsibility for the safety of the vehicle and
other road users.
For
this reason, you should
only use the functions in a manner that al­
lows you to maintain control of the vehicle
in all situations - accident risk!
- The speech dialogue system must not be
used in cases of emergency, since the voice
changes in stressful situations. This could
result in a failed or delayed telephone
con­

nection.
Always dial emergency numbers
manually!
164

Speech dialogue system

CO

â
rN
IN
rN
•-i

•H
00
The ignition and the MMI system must be switch­
ed on.
You must not be speaking on the phone.
The parking aid and the Audi speech dialogue sys­
tem must not be active.
A mobile phone must be connected to the MMI
system via the Handsfree profile
Opage
173.
The mobile phone connected must feature a
speech dialogue function that can be controlled
externally.

•
To switch
on:
Press and hold the
S
button on
the multi-function steering wheel* and give a
spoken command after the external speech dia­
logue system has been activated.

•
To continue/restart a dialogue: After
a
dia­
logue has been ended, the system remains ac­
tive for
a
short period during which you can
start a new external dialogue at any time. If
necessary, press
the S
button and say a new

command.
Or: SeLect and confirm Continue on
the MMI control console.

•
To switch off: Press and hold the
\2*\
button for
several seconds. Or: Select and confirm Cancel
on the MMI control console.
© Note
- No navigation cues* or traffic announce­
ments* are played when a dialogue is active.

-Thisfunction
depends on the mobile phone
you are using. For further information re­
garding your mobile phone, contact your
mobile network service provider or refer to
the operating instructions
for
your mobile

phone.

- AUDI AG only enables you to access your
mobile phone's speech dialogue system and
accepts no responsibility for the content
and commands of the external speech dia­
logue system.
171

Telephone
- We recommend using the vehicle's Wi-Fi
hotspot* when the car phone* is in use so

that
your mobile phone's apps retain access
to the Internet.
- When the car phone function* is active, Audi
connect (infotainment)* is only available us­
ing
your
own SIM card
^>page
191.
Setting up
Connecting a mobile phone via Bluetooth

Applies
to: vehicles with telephone

Does
this PIN match the PIN on your

Bluetooth
device?
967536

Fig.
159
PIN display for entry on mobile phone
Important
The vehicle must be stationary, and the ignition
must be switched on.
The Bluetooth function and the discoverability
option of the MMI system
Opcge
258 and the
mobile phone must be activated.
The mobile phone you would like to connect must
not be connected to any other Bluetooth device.
The MMI must not be connected to a mobile

phone.

A mini SIM card must not be inserted in the SIM
card reader*.
Connecting a mobile phone

•
Select: |MENU| button
>
Telephone
>
Connect
mobile phone
>
Find new devices > Continue.
The available Bluetooth devices will be shown
on the infotainment display. Or: Select:
|MENU|

button > Settings > left control button > MMI
settings > Connection manager
^>page
257.

•
Select and confirm the desired mobile phone
from the list of Bluetooth devices shown.
• The MMI will generate a PIN for the connection

*Fig.
159.

•
Select and confirm Yes.

•
Enter the PIN to establish a connection on your
mobiLe phone. Or: If the PIN is already being
displayed on your mobile phone, confirm it on
the phone and on the MMI. You have about 30
seconds to enter the PIN.

•
You may need to enter the PIN for your SIM
card
intheMMl".

•
Please note any additional system queries on
your mobiLe phone, e.g. whether the phone
should connect automatically in the future. On
some mobiLe phones, you may also need to
download the directory and allow access to
your messages separately.
After connecting successfully
After the connection has been established suc­
cessfully, you will be shown a short message
con­

taining information on the profiles used to estab­
lish the connection. You can also change the pro­
files afterwards. Select: |MENU| button > Set­
tings > left control button > MMI settings
>
Con­
nection manager
<=$page
257.
In addition, the contacts on the mobile phone are
automatically loaded into the directory of the

MMI.
This may take several minutes, depending
on how many contacts are stored on the mobile

phone.

Applies
to: vehicles with Audi connect (infotainment)

•
If
you
have successfully connected your mobile
phone via the Bluetooth remote SIM Access
Profile, you can use either the embedded SIM
card
2)
or your own SIM card to use Audi
con­

nect infotainment services.

•
Confirm the system query with either Yes or

No.
For more information on Audi connect (in­
fotainment), please refer to
^>page
191.

*•
Yes:
All data connections for all Audi connect
infotainment services will be established by a

CO
<
o
rN
IN
rN
t-H
o

<

-1'
Not available in all markets. Applies to mobile phones

with
Bluetooth remote SIM Access Profile on vehicles with

Audi
connect (infotainment)* and Audi phone box*.

2)
SIM card installed in vehicle at factory.
173

Telephone
mobile network provider via the embedded SIM

card1)
^page
191. Your mobile phone will be
connected via Handsfree only
^>page
172, and
you will not be able to use the car telephone

function*
^>page
172.

•
No: All data connections for all Audi connect in­
fotainment services will use your own SIM
card.

All connections via the embedded SIM
card1*

will be disconnected, and you will be able to
use the car telephone function*
^>page
172.

You can now use Audi connect infotainment serv­

ices.

Applies to: vehicles with Audi connect (infotainment)

•
You can configure your vehicle's mobiLe Wi-Fi

hotspot*2)
and the Audi connect infotainment
services* immediately after connecting an

rSAP-enabled
mobile phone
^page
191. Or:

Select [TÊT]
button > right control button >
Connection manager
>
right controL button >
Wi-Fi settings.
Using the function Store as default telephone in
the Connection manager, you can store one of
your connected mobile phones as the default
phone
^>page
258.

(T)
CAUTION
Please always observe the information
^©/n

Wi-Fi hotspot on page 202.
- You can adjust further settings for connec­
ted mobile phones using the connection
manager
^>page
257.
- You can also search for the MMI system via
the Bluetooth device search function on
your mobiLe phone.
- Bluetooth devices only have to be bonded

once.
Any devices that have already been
bonded to the MMI system are connected
automatically when the Bluetooth function

11
SIM card installed in vehicle at factory.

2'
Not available in all markets.

3)
The number of possible attempts depends on the SIM

card.

is switched on, the devices are within range
of the car and the ignition is on. The mobile
phone last connected is given priority.
-You will need to authorise the MMI connec­
tion on your mobile phone to enable auto­
matic connection.
- Please note any system queries on your mo­
bile phone, e.g. whether the phone should
connect automatically in the future. On
some mobile phones, you may also need to
download the directory and allow access to
your text messages separately.
- You receive the SIM PIN code from your mo­
bile network service provider together with
the SIM
card.
If
you
enter the SIM PIN code
incorrectly three
times35
in a row, the SIM
card will be be blocked. A PUK (personal un­
blocking key) must be entered in order to
reactivate the SIM
card.

-The Bluetooth connection between the sys­
tem and the mobile phone is automatically
terminated when you leave the car. Depend­
ing on the mobile phone, telephone calls
may be transferred automatically from the
MMI to your mobile phone so that you can
continue talking.
- For further information regarding your mo­
bile phone, contact your mobile network
service provider or refer to the operating in­
structions for your mobile phone. For infor­
mation on using a phone in your car, please
go online (e.g. www.audi.com/bluetooth)
or ask an Audi dealer.
174

Telephone
Operating two phones via the MMI
Applies to: vehicles with Audi phone box

You
can connect two mobile phones to the MMI
system using the Audi phone box (e.g. your
busi­

ness mobile as the primary phone and your
per­

sonal mobile as an additional phone).
You
can
then be reached inside the vehicle on both mo­
bile phones.
The first mobiLe phone that you connect is shown
as the primary phone on the MMI system. The
second mobile phone is connected as an
addi­

tional phone.
The system will always display the phone book on
the primary phone while it is connected. To use
the phone book on the additional phone, you
have to swap the primary phone and additional
phone
^>page
175.
Connecting a mobile phone as the primary
phone
Connect your mobile phone to the MMI system
via Bluetooth. The first mobiLe phone that you
connect is shown as the primary phone on the
MMI system.
Refer to
^page
173,
Connecting a mobile phone
via Bluetooth.
Connecting a mobile phone as an additional
phone
Important: A mobile phone must be connected
to the MMI system as the primary phone. Or:
Your own mini SIM
card15
for making and receiv­
ing calls must be inserted in the SIM card
read­

er*.

CO

<
O
rN
IN
rN
t-H
o < 00
Select:
|MENU|
button
>
Telephone > right
con­

trol button > Connect additional phone.
Refer to
^>page
173,
Connecting a mobile phone
via Bluetooth.
For example, you have connected your business
mobile to the MMI system as the primary phone
and your personal mobile as the additional

phone.
To call
a
contact stored in your personal

x)
Not available in all markets. On vehicles with Audi connect
(infotainment)* and Audi phone box*
phone book, you now have to swap the primary
phone with the additional phone because the sys­
tem always displays the phone book from the
pri­

mary phone.
Inserting your own mini SIM card in the SIM
card reader*
Important: The MMI must not be connected to a
mobile phone.
Refer to
^>page
176,
Making and receiving calls
using your own mini SIM card.
If
you
want to use your mini SIM card in the SIM
card reader* as an additional phone, please refer
to
*$page
189.
Swapping the primary phone and additional
phone
Important: A primary phone and additional
phone must be connected.
To swap the primary phone with the additional
phone, select:
|MENU|
button
>
Telephone
>
right
control button > Switch primary & additional
phone.
- Please note that the system only ever dis­
plays the directory on the primary phone.
- Please note that, when your mini SIM card is
inserted in the SIM card reader*, any mobile
phones for making and receiving calls which
are already connected to the MMI via Blue­
tooth will be disconnected.
- You can see in the connection manager

^>page
257 whether your mobile phone is
connected as a primary phone or an
addi­

tional phone. Or: The device name of the
primary phone connected to the system

(e.g.
MyPhone) is displayed in the Tele­
phone menu.
- If the primary phone is not connected to the
MMI automatically when the ignition is
switched on, e.g. because it is out of range
of the vehicle or because the Bluetooth
function is switched off, a phone which was

175

Telephone
previously connected as an additional phone
will be connected automatically as the
pri­

mary phone.
-You can send and receive messages on both
the primary phone and additional phone

^>page
178, Fig. 162. You do not have to
swap the primary phone and additional
phone to do so.
- Using the function Store as default tele­
phone in the Connection manager, you can
store one of your connected mobile phones
as the default phone
^>page
258.
Making and receiving calls using your own
mini SIM card
Applies to: vehicles with Audi connect (infotainment) and
Audi phone box

Fig.
160 Mini SIM card (actual size)
The SIM card reader is located in the glove
box@
^>page
10, Fig. 2.
With this telephone
option15,
you can be reached
on the telephone number of your own SIM card in
the SIM card reader. Depending on the type of
mini SIM
card,
this may be the same number as

for
your current mobile phone contract (twin/
Multi SIM card) or another number from a differ­
ent mobile phone contract.
Important
The vehicle must be stationary, the ignition must
be switched on and the Telephone menu must
have been called up.
Using your own mini SIM card
• The missing corner of the mini SIM card should
be at the front Left. Slide the mini SIM card into
the slot in the SIM card reader
of/g.
160 until
you feel it engage.

•
If requested, enter the PIN code for your mini
SIM card
in
the MMI.

•
SeLect and confirm OK.

•
To allow the MMI to connect automatically in
the future, select and confirm Yes.

•
Select and confirm either Telephone installed
in vehicle (SIM card) or Personal mobile
phone (Bluetooth).
Telephone installed in vehicle (SIM card): The
external car aerial is used. The SIM card is used
for phone calls and Audi connect (infotainment)*.
Personal mobile phone (Bluetooth): The exter­
nal car aerial is only used in conjunction with the
Audi phone box. The mini SIM card in the card
reader is only used for Audi connect (infotain­
ment)*.
You can set whether you would also like the sys­
tem to establish a data connection for the Audi
connect infotainment services*
^>page
193.
Please observe the notes on using Audi connect
(infotainment)
°=>page
191.
After connecting successfully
After connecting successfully, either one or two
symbols (depending on the connection type) will
appear in the status line of the infotainment dis­
play to indicate the signal strength
(§)/©
tapage
161, Fig. 156.
You can go back and change whether
caLls
are
made using the mini SIM card in the SIM card
reader
or
your mobile phone by selecting the

x)
Not available in all markets.
176

Telephone
A WARNING
- Loose objects can be flung around in the
passenger compartment in the event of
sud­

den driving or braking manoeuvres. This
could result in serious injuries and also
cause you to lose control of the vehicle. Al­
ways keep the centre armrest closed when

driving.

- The mobile phone may become hot while
charging wirelessly. Consider the tempera­
ture of your mobile phone when removing

it.
Take the mobile phone out of the Audi
phone box carefully.
© Note
- The Audi phone box is not available in all
countries. Your Audi dealer will be able to
provide you with more detailed information.
- If the mobile phone is placed in the Audi
phone box in a bag or
a
protective case, this
may interfere with the connection to the ex­
ternal aerial*.
- Any metal objects in the Audi phone box will
prevent the mobile phone from charging
wirelessly or being used to make calls via
the external aerial*.
- The charging time and the temperature vary
depending on the mobile phone being used.
-The ignition must be switched on to charge
a mobile phone in the Audi phone box.
- To avoid malfunctions, ensure that the mo­
biLe phone is correctly placed inside the
Audi phone box.
-The maximum charging capacity is 5 W.
- An enhanced transmission quality cannot be
guaranteed if more than one mobile phone
is placed inside.*
-Audi recommends the use of Audi Genuine
Accessories. Audi has tested these products
for suitability, reliability and safety.
- USB adapters are available from Audi
deal­

ers or specialist retailers.
- When you charge your mobile phone wire­
lessly, the charging procedure may be inter­
rupted if
you
place your remote control key
in the Audi phone box together with the
mobile phone.
Using the telephone
Calling up the telephone

Applies
to: vehicles with telephone

~~ .*|
Call
list

^^
•£?
Favourites

i
'^
Directory

y»
^ Enter
phone number

^^f
I
Text message (SIM card)

Fig.
162 Example: Telephone functions in the selection

menu

i\ï
Enter
number

SI
Text
message
(SIM
card)

I
Text message (MyPhone)

Text
message (Additional phone)

^mail
(MyPhone)

Fig.
163 Example: Further telephone functions in the se­

lection
menu
Important: A mobile phone must be connected
to the MMI
<^>page
173,
or
your own mini SIM
card must be inserted in the SIM card reader*

^>page
176.
• Select: |MENU| button
>
Telephone > left
con­

trol button.
The following telephone functions are available

*Fig.
1621'*
Fig.
163:

® Call
list 179

©
Favourites 181
(D Directory 185
(4) Enter number 179

(D
Text message (SIM card)*/Text
message (MyPhone)VText message
(additional phone)* 182
(6)
E-mail
(MyPhone)*/E-mail
(addi­
tional phone)* 183
Your mobile phone's device name is displayed in
the Telephone menu, e.g. Text message (My­
Phone)
^>Fig.
163.
178