2020 TOYOTA TACOMA Accessories, Audio & Navigation (in English)

2117-3. Multi-terrain Monitor
7
Peripheral monitoring system
The front-wheel drive control
switch in the case of 2WD or 4H,
the multi-terrain monitor can dis-
play a screen suitable for on-
road.
The multi-terrane monitor
does a screen division into
two of right and left and dis-
plays it.
• Left side screen: Front view or
rear view
• Right side screen: Panoramic view
In addition, even both side views,
wide rear view can identify the
obstacle around the vehicle.
Panoramic view & wide front
view ( P.215)
Side views ( P.215)
Panoramic view & rear view
( P.215)
Wide rear view ( P.215)
When automatic display mode is
turned on, the Multi-terrain Mon-
itor screen is displayed in the
following conditions, even if the
Screens when the front-
wheel drive control switch
is in 2WD or 4H (for on-
road)
Checking the front and
around the vehicle
Checking the sides of the
vehicle
Checking the rear and
around the vehicle
Automatic display mode

2127-3. Multi-terrain Monitor
camera switch has not been
operated.
• Vehicles with an automatic transmission: When the shift
lever is shifted to “N” or “D”
position.
• Vehicles with a manual trans- mission: When the shift lever
is in a position other than “R”
and the vehicle starts moving.
• When vehicle speed is reduced to approximately 6
mph (10 km/h) or less.
●The automatic display mode
switches between on and off each
time is selected. When
automatic display mode is on, an
indicator illuminates on the icon.
●Even when automatic display
mode is on, the display can still be
switched by pressing the camera
switch.

2137-3. Multi-terrain Monitor
7
Peripheral monitoring system
●The Multi-terrain Monitor is displayed by operating the camera switch
when vehicle speed is approximately 7 mph (12 km /h) or less. If the vehi-
cle speed exceeds approximately 7 mph (12 km/h), the Multi-terrain Moni-
tor display is canceled.
When the shift lever is in a position other than “R”
Changing the Multi-te rrain Monitor screen
The screen display can be switched by operating the
switches as follows while the Multi-terrain Monitor screen is
displayed. (Screens that can be displayed will vary depending
on the positions of the shift lever and front-wheel drive con-
trol switch)
Screens when the front-whee l drive control switch is in
4L (for off-road)

2147-3. Multi-terrain Monitor
When the shift lever is in the “R” positionMap screen, audio screen, etc.
Front view & dual side view
Front view & dual side view (front magnified)
Under vehicle terrain view & dual side view
Under vehicle terrain view & dual side view (front magnified)
Rear view & dual side view
Wide rear view
Pressing the camera switch
Selecting the under vehicle terrain view selection button
*
Selecting the display mode switching button*
*: The screen display can be switch ed by touching the image from the cam-
era on the screen.
A
B
C
D
E
F
G
H
I
J

2157-3. Multi-terrain Monitor
7
Peripheral monitoring system
When the shift lever is in a position other than “R”
When the shift lever is in the “R” positionMap screen, audio screen, etc.
Panoramic view & wide front view
Side views
Panoramic view & rear view
Wide rear view
Pressing the camera switch
Selecting the display mode switching button
*
*: The screen display can be switch ed by touching the image from the cam-
era on the screen.
Screens when the front-whee l drive control switch is in
2WD or 4H (for on-road)
A
B
C
D
E
F
G

2167-3. Multi-terrain Monitor
Front view & dual side view can be used to check the area around
the front of the vehicle.
In addition to an image of the front of the vehicle, guide line s are
displayed in a composite view to provide reference for when
deciding a direction to move forward in.
 If the camera switch is pressed while the screen is displayed, the
screen switches from normal to magnified display. (Pressing the
switch again returns the screen to the normal display)
 If the steering wheel is turned 90° or more, guide lines and other
features to support turning are automatically displayed.
Front view & dual side view
Screen display and func tions (for off-road)
The front-wheel drive control switch in the case of 4L, the
multi-terrain monitor can display a screen suitable for off-
road.
Front view & dual side view
M

2177-3. Multi-terrain Monitor
7
Peripheral monitoring system
Front view & dual side view (front magnified)Under vehicle terrain view selection button
Select to switches between front view and under vehicle terrain view.
Automatic display button
Select to turn automatic display mode on/off. The indicator on the button
illuminates during autom atic display mode. (P.211)
Tilt meter/slip display
Displays the vehicle’s estimate d degree of incline or indicates a tire slip-
page. ( P.218, 219)
Vehicle width lines (blue)
Shows guide lines of the vehicle’ s width including the outside rear view mir-
rors.
1.5 ft. (0.5 m) distance guide line (red)
Show distance in front of the vehicle.
• Display points approximately 1 .5 ft. (0.5 m) from the edge of the bumper.
3 ft. (1 m) distance guide line (blue)
6 ft. (2 m) distance guide line (blue)
Front tire course line (yellow)
Shows the estimated course of the front tires according to steering wheel
position.
Forward movement guide line (blue)
Shows the estimated tire cours e of the tightest possible turn.
Front tire contact line (blue)
M
A
B
C
D
E
F
G
H
I
J

2187-3. Multi-terrain Monitor
Shows guide lines of where the front tire touches the ground.
Rear tire contact line (blue)
Shows guide lines of where the rear tire touches the ground.
Rear tire course line (yellow)
Shows the estimated course of the rear tires.
When the steering wheel is turned by 90° or more
●The screen can be displayed when the shift lever is in a positi on other
than “R”.
●When the intuitive parking assist detects an obstacle or anothe r vehicle, a
warning message pops up in the tilt meter/slip display area.
This function operates when the front-wheel drive control switch is in
4L. The front view image is autom atically adjusted to be parallel and
assist the driver to check road surface conditions regardless o f the
vehicle inclination.
●The vehicle inclination displayed on the screen may differ from the actual
state.
●When the rotated screen is displ ayed, the corners of the front bumper may
not be seen on the screen.
Tilt meter displays the vehicle
inclination to the front, rear, left
and right within a range of 0° to
approximately 30°. Front view rotating display function
K
L
M
7LOWPHWHU