2020 MERCEDES-BENZ SPRINTER weight

we
ight .Don otundershoo tthe minimum permis‐
sible nose weight .Otherwise, thet railer may
become de tach ed.
R Distribut ethe load over thev ehicle and the
traile rsoasn ot toexceed either them axi‐
mum permissible values fort he gross vehicle
we ight rating (GVWR )and gross traile rweight
(G TW ),th ep ermissible gross weight forv ehi‐
cle-trailer combination s(GCWR), nor them ax‐
imum permissible gross axle weight rating
(GAWR )and traile rdrawbar nose weight (TWR)
of your vehicle.
R Addthe rear axle load tothet railer dr awbar
nose weight of thet railer dr awbar on theb all
head (TWR). This will ensur ethat youdon ot
exc eed thep ermissible gross axle weight rat‐
ing (G AWR).
R Addthe vehicle load tothet railer dr awbar
nose weight of thet railer dr awbar on theb all
head (TWR). This will ensur ethat youdon ot
ex ceed thep ermissible gross vehicle weight
ra ting (GVWR).
Che cking thev ehicle and trailer weight
R Mak esuret hat thew eights of thet ow ing
ve hicle and thet railer comply wit hthe maxi‐
mum permissible values. Ha vethec ar/t railer
combination weighed on acalibrated weigh‐
ing machine. The car/trailer combination
comprises thet ow ing vehicle including driver,
passenger sand load as well as thel aden
trailer.
R Chec kthe maximum permissible gross axle
we ight rating of thef ront and rear axles
(GAWR), theg ross trailer weight (G TW),the
permissible gross weight forv ehicle-trailer
combination s(GCWR)a ndthet railer dr awbar
nose weight rating (TWR). Tr
aile rpowe rsupply Incor
rect cabling of thec onnector plug ma yinter‐
fe re wit ho ther electronic sy stems in thev ehicle.
Mercedes-Ben ztherefor erecommends that you
ha ve thec abling of thec onnector plug car ried
out at aqualified specialis tworks hop.
Yo uc an connec taccesso ries up toam aximum of
24 0Wtot he permanent po wersupply .Don ot
ch arge atrailer batter yusingthe po wersupp ly.
Yo ur vehicle ma ybeequipped wit harangeof
electrica lequ ipment fort railer operation.
Depending on your trailer ,you ma yneedan adap
terf or thee lectrical connection between the
traile rand your vehicle.
The trailer soc ketofy ourvehicle is equipped with
ap ermanent po wersupp lyat thef actor y.
The permanent po wersupp lyis supplied via
trailer soc ketp in4.
No tethat thet railer's permanen tpowe rsupp lyis
no ts witched of fwhen thev ehicle's on-board
electrical sy stem voltag eisl ow.This could com‐
ple tely dischar geyour vehicle's star terb atter y.
Fu rther information on thee lectrical equipment
cur rentl yins talled on your vehicle and on ins tal‐
ling thet railer electrics can be obtained at a
qu alified specialis tworks hop. Driving and parking
17 3

R
Fasten thel oad tothet ie-down eyes and dis‐
tribut ethe load evenlya mong them.
R Use tie-down eyes and fastening components
whic haresuitable fort he weight and size of
th el oad. Load distribution
* NO
TERisk of damag etothefloor co ver‐
ing Excessiv
epoint loading on thec argo com‐
partmen tfloor or on thel oad area can nega‐
tivel yaffect thed riving characteristic sand
could damag ethe floor co vering. #
Vehicles with rear-wheel drive: dis‐
tribu tethel oad uniformly .When doing
so, ensur ethat theo verall cen terof
gr av ity of thel oad is alw aysasl owand
close tothec enter as possible and
between thea xles near ther ear axle. #
Vehicles with all-wheel drive: distrib‐
ut et he load uniforml y.When doing so,
ensur ethat theo verall cen terofg ravity
of thel oad is alw aysasl owand close to
th ec enter as possible and between the
axles. Fo
rC argo Vans, buses and Passenger Vans:
R Alwayst ranspor tloads in thec argo compart‐
ment.
R Alwaysp lace thel oad agains tthe seat backr‐
ests of ther ear benc hseat.
R Movelarge and heavy loads as fart ow ards
th ef ront of thev ehicle as possible in the
direction of tra vela ga ins tthe rear ben ch
seat. Stow loads flush wit hthe rear ben ch
seat.
R Alwaysa dditionally secur ethe load wit hsuita‐
ble load securing aids or tie downs.
R The load mus tnotprotru de abo vetheu pper
edg eoft he seat backrests.
R Transpor tloads behin dseat sthat ar enot
occupied.
R Ifth er ear benc hseat is no toccupied, insert
th es eat belts crosswise int othe seat belt
buckle of theo pposit eseat belt. Securing loads
Note
sonl oad securing &
WARNING Risk of accident and injury
du etoi ncorrect use of thel ashing stra ps
If yo ua ttac hthe lashing stra pi ncor rectly
whe nsecu ring loads, thef ollowing ma yoccur
in thee vent of abrup tchanges in direction,
braking maneuver or an accident:
R The tie-down eyes ma ybecome de tach ed
or thel ashing stra pm aytear if thep er‐
missible load is exceeded.
R The load cann otbe restra ined.
This ma ycause thel oad toslip, tip overorbe
fl ung about ,striking vehicle occupants. #
Alwayst ension thel ashing stra ps in the
proper manner and onl ybetwe en the
described tie-down eyes. #
Alwaysu se lashing stra ps designed spe‐
cificall yfor thel oads. %
Obser
vethei nformation relatin gtot he maxi‐
mum loading capacity of thei ndividual cargo
tie-down point. If youc ombin evarious cargo
tie-down points tosecur eaload, alw ayst ake
th em aximum loading capacity of thew eak‐
es tc argo tie-down poin tint oa ccount .During
maximum full- stop braking, forc es ma yact
whic hcan multipl ythe weight of thel oad.
Alw aysu se se veralc argo tie-down point sto
distribut eand spread thel oad. Spread the
load evenly between thec argo tie-down
points or tie-down eyes.
Alw ayso bser vetheo perating instruction sorthe
lashing stra pm anufacturer's instruction sfor the
operation of thel ashing stra p.
Obser vethei nformation relatin gtot he maximum
loading capacity of thec argo tie-down points
(/ page289).
As thed rive r,yo ua re re sponsible fore nsuring the
fo llowing:
R The load is secured agains tslipping, tipping,
ro lling or falling off.
Ta ke usual traf ficc onditions as well as swerv‐
ing or full brak eapplication and bad roads
int oa ccount.
R The applicable requ irements and guidelines
re latin gtol oad-securing practices ar emet.
If th is is no tthe case, this ma yconstitut ea
punishable of fense, depending on local legis‐ 208
Transporting

light
weight loads. La yanti-slip mats underneath
th el oad tosecur ethe load additionally. Installing and
removing tie-down eyes #
Toinstall: slidethet ie-down eyet hrough a
re cess in thel oading rail close tothel oad
until locking mechanism engages in the
re cess.
% Whe
nyou pull locking mechanism up and out
of ther ecess, thet ie-down eyeisa bleto
mo vewithin thel oading rail. Mak esuret hat
locking mechanism is alw ayse ngaged in a
re cess. #
Che ckthet ie-down eyef or firm seating. #
Toremo ve: pull lo cking mechanism up and
pull thet ie-down eyet ow ards thel ocking
mechanism and out of thel oading rail
th ro ugh arecess. Car
rier sy stems Information abou
tthe roof rack &
WARNING Risk of inju rydue tothem axi‐
mum roof load being exceeded
When youp laceal oad on ther oof as well as
all outer and inner attachments, thev ehicle's
center of gr avity will rise and thef amiliar driv‐
ing characteristic saswell asthes teering and
braking characteristic swillch ange. When
drivin garound bends, thev ehicle will tilt
mor eheavily and ma yreact mor esluggishly
to steering mo vements.
If yo ue xceed them aximum roof load, the
driving characteristics, as well as thes teering
and braking, will be greatl yimp aired. #
Nevere xceed them aximum roof load
and adjus tyour driving style. 1
Mountin grails
Informatio nabout them aximum roof load can be
fo und in the" Tech nical data" section
(/ page289).
Obser vethef ollowing points fora ssembling roof
ra ck s:
R Tighten ther oof rack 's scr ewstoat orque of
6.0 lb-f t(8N m)–7.4 lb-f t(10 Nm) in thed es‐
ignated groo vedp lates.
R The tightened scr ewsshould no ttouc hthe
ra ils.
R Ensur ethat theg roove dplates ar enotloca‐
te dint he areas around thep lastic caps.
R The groo vedp lates mus thave ther ight cross-
sectio n.
R The insides of them ounting rails mus tbefree
of dirt.
R Re-tigh tent he scr ewsu niformly af tera round
300 mile s(500 km).
Mercedes-Benz recommends that youu se on ly
ro of rack st hat ha vebeen tested and appr oved
fo rM ercedes-Benz. These help topreve ntvehicle
damage.
If yo uw ant toretrofit them ounting rails, ha ve
th em ins talled at aqualified specialis tworks hop.
Otherwise, youc oul dd amag ethe vehicle.
If yo ur vehicle is ins talled wit hmountin grails on
th er oof, youc an install aroof rack on ther oof.
Special fastener s(sliding bloc ks)a re available as
accesso ries fort his purpose.
These fastener sareavailable from an yauthorized
Mercedes-Ben zCenter. 210
Transporting

Pe
rm issible towing me thods Bo
th axle sont he
gr ound Fr
ont axle raised Re
ar axle raised
Ve hicles wit hauto‐
matic transmission and
re ar-wheel drive Ye
s, no fur ther than
31 miles (50 km) at
31 mp h(50 km/h) Ye
s, no fur ther than
31 miles (50 km) at
31 mp h(50 km/h) Ye
s, if thes teering
wheel is fixe dint he
center position wit ha
st eering wheel lock
Ve hicles wit hall-wheel
drive Ye
s, no fur ther than
31 miles (50 km) at
31 mp h(50 km/h) No
NoTo
toww ithar aisedaxle: towing should be per‐
fo rm ed byatow ing compan y. To
wing away thev ehicle wit hbotha xleson
th eg round #
Obser vethen otes on permissible towing
me thods (/ page236). #
Mak esuret hat theb atter yisc onnected and
ch arge d.
When theb atter yisd ischar ged, thef ollowing sit‐
uations occur:
R The engine canno tbestarted.
R It is no tpossible torelease or appl ythe elec‐
tric parking brake.
R Vehicles with automatic transmission: the
automatic transmission canno tbeshiftedto
position 005Cor005D.
* NO
TEDama gedue to to wing away at
exc essivel yhigh speeds or overlong dis‐
ta nces The driv
etra in could be damaged when towing
at exc essively high speeds or over long dis‐
ta nces. #
Atow ing speed of 30 mph(50 km/h)
mus tnotbe exc eeded. #
Atow ing distanc eof30miles (50 km)
mus tnotbe exc eeded. %
Ve
hicles with automatic transmission
and rear wheel drive: ifth er eisam alfunc‐
tion, thea utomatic transmission ma ybe
loc kedinp osition 005D. If
th ea utomatic transmission cann otbe shif‐
te dtop osition 005C,transpor tthe vehicle
(/ page239). Atow ing vehicle wit hlifting
equipment is requ ired forv ehicle transport. &
WARNING Risk of accident whe ntow ing
av ehicle whic histoo heavy
If th ev ehicle being tow- star tedort owed
aw ay is heavier than thep ermissible gross
mass of your vehicle, thef ollowing situations
can occur:
R The towing eyem aybecome de tach ed.
R The vehicle/trailer combination may
swer veoreve noverturn. #
If ano ther vehicle is tow- star tedor
to we da way,its weight mus tnotexc eed
th ep ermissible gross mass of your own
ve hicle. If
av ehicle needs tobe towe dort ow st arted, its
we ight should no tbegreater that thep ermissible
gross mass of thet ow ing vehicle. #
Information on thev ehicle's permissible gross
mass can be found on thev ehicle identifica‐
tion plat e(/pag e274). #
Vehicles with automatic transmission: do
no to pen thed rive r's or co-driver door ,asthe
automatic transmission will automatically
shif ttop osition 005D. #
Installth et ow ing eye( /pag e240). #
Secur ethe towing device. Breakdown assis
tance 237

Un
locking and removing the stowage com‐
pa rtmen tcover #
Remo vether ubber mat from thef ront-
passenger foot we ll. #
Tounlo ck:turnthe quick- re lease fastener 1
counter-clockwise toposition 0047. #
Slightly raise and pull out thec over.
Inserting and locking thec over #
Slide in thec over and press it down wards. #
Press down theq uick-re lease fastener 1
until it engages. #
Tolock: turnthe quick- re lease fastener 1
clockwise toposition 0048. Re
moving the vehicl etool kit Example:
vehicle tool kit insert #
Raise thei nser tatm arke dp oints 1. #
Pull thei nser tout of clips 2. St
oring thev ehicle tool kit #
Slide thei nser tint oc lips 2. #
Close thei nser tbyp ressing on mar kedp oints
1. Hydraulic jack
Information on
theh ydraulic jack The
hydraulic jac kislocated in side compartment
1 abo vethec o-driver door step.
The jac khasam aximum weight of 16.5 lbs
(7.5 kg)d epending on thev ehicle's equipment.
Yo uw illfind them aximum load capacity of the
jac kstatedont he adhesiv elabel attached tothe
jac k.Ifth er eisam alfunction, please contact a
qu alified specialis tworks hop.
Jac km aintenance:
R Cleana nd grease all moving parts af teru se.
R Extend and retract thep isto ns ful lyeve rysix
months. 242
Breakdown assis tance

Fr
ont axle tir epressures on vehicles with all-wheel/rear wheel driv eand single tires
Max. front axle load 4101 lbs (1860 kg) Ti
re s/disc wheel Vehicl eload Max. front axle load
4101 lbs (1860 kg)
LT 24 5/75R1 6120/1 16QF ullyladen 320k Pa(3.2b ar/46 psi) Fr
ont axle tir epressures on vehicles with rear wheel driv eand single tires
Max. front axle load 4409 lbs (2000 kg) Ti
re s/disc wheel Vehicl eload Max. front axle load
4409 lbs (2000 kg)
LT 24 5/75R1 6120/1 16QF ullyladen
360k Pa(3.6b ar/52 psi) 1) 1)
Only valid forv ehicles wit halong wheelbase
17 1in( 4350 mm) and apermissible gross weight
of ove r7716l bs (3. 5t).
Re ar axle tir epressures on vehicles with all-wheel/rear wheel driv eand single tires
Max. rear axle load 535 7lbs (2430 kg) Ti
re s/disc wheel Vehicl eload Max.rear axle load
535 7lbs (2430 kg)
LT 24 5/75R1 6120/1 16QF ullyladen 480k Pa(4.8b ar/70 psi)
LT 24 5/75R1 6120/1 16 Q
Partiall yladen 2)
420 kPa(4.2b ar/6 1psi)2) 2)
It is onl ypermissible touse this reduced tire
pressur eifitcan be guaranteed byweighing the
ve hicle that ther ear axle load of 4960 lbs
(2250 kg)w ill no tbee xceeded. In case of doubt,
inflat eto4 80 kPa(4.8 bar/70 psi).
Fr ont axle tir epressures forv ehicles wit hall-wheel/rear wheel driv eand twin tires
Max. front axle load 4079 lbs (1850 kg)Ti
re s/disc wheel Vehicl eload Max. front axle load
4079 lbs (1850kg)
LT 21 5/85R1 6115/112 QF ullyladen 380k Pa(3.8b ar/55 psi) Max. front axl
eload 4409 lbs (2000 kg) Ti
re s/disc wheel Vehicl eload Max. front axle load
4409 lbs (2000 kg)
LT 21 5/85R1 6115/112 QF ullyladen 420k Pa(4.2b ar/ 61psi) 248
Wheels and tires

Mak
esuretoo bservethef ollowing fur ther rela‐
te ds ubject:
R Notesont irep ressur e(/pag e246)
Ra dio-equipment appr oval of thet irep res‐
sur em onitoring sy stem
Ra dio equipment appr oval numbers Countr
yRadio equipment appr oval
number
Canada IC: 4008C- TSSRE4A
Ope ratio niss ubject tothef ollow‐
ing tw oconditions:
(1) this device ma ynotcause
harmful inter fere nce, and
(2) this device mus tacce ptany
inter fere nce received, including
inter fere nce that ma ycause
undesired operation.
Mexic oM odel:TSSRE4A &TSSSG4G6,
IFETEL: RLVHUTS17-0806
US AF CC ID:YGO TSSRE4A
Thi sd evice complie swithP art15
of theF CC Rules. Operation is
subjec ttothefollowing tw ocon‐
ditions: (1) this device ma ynot
cause harmful inter fere nce, and
(2) this device mus tacce ptany
inter fere nce received, including
inter fere nce that ma ycause
undesired operation.
WA RNING: An ychanges or modifi‐
cation no texpressly appr ovedby
th ep arty responsible forc ompli‐
ance could void theu ser's author‐
ity tooperat ethis equipment. Loading the
vehicle Ti
re and Loading Information placard &
WARNING Risk of an accident whe ndriv‐
ing wi than ove rloaded tire
Overloaded tires ma yoverheat and bur stas a
consequence. Overloaded tires can also
impair thes teering and handling characteris‐
tic sa nd lead tobrak efailure. #
Obser vethel oad rating of thet ires. #
The load rating mu stbe at leas thalf the
gros saxle weight rating of thev ehicle.
Mercedes-Ben zrecommends youu se
th el oad-bearing index, whic hisgiven in
th ev ehicle documents. #
Nevero verload thet ires by exc eeding
th em aximum load. Onl
yvehicles wit hagross vehicle weight of less
th an 10,000 lbs (4,53 6kg) ha veaT irea nd Load‐
ing In form atio nplacar dont he B-pillar on thed riv‐
er's side. 1
Tire and Loadin gInforma tionp lacard %
The dat
ashown in thei llustration is sample
data.
The Tire and Loadin gInforma tionp lacar dshows:
R The maximum number of seats indicates the
maximu mnumber of occupants permitted to
tr ave lint hevehicle.
R The maximum permissible load equals the
gros sweight of all vehicle occupants, thel ug‐
ga ge and cargo.
R The recommended tir epressu resf or cold
tires. The recommended tir epressures apply
to them aximum permissible load and up to
th em aximum permissible speed of thev ehi‐
cle.
Also obser vethef ollowing information:
R The information about permissible weight son
th ev ehicle identification plat e(/pag e274).
R The informatio nabout tir epressu reon the
tir ep ressur etable . Wheels and tires
253

Ad
ditional related subjects:
R Determ inin gthe maximum load
(/ page254).
R Notesont irep ressur e(/pag e246). Ste
pstodeterm ining thec orrect critica lload The
following steps ha vebeen de veloped as
requ ired of all manufacturer sunder Title 49,
Code of U.S. Federal Regulations, Part57 5in
accordance wit hthe "National Traf fica nd Mo tor
Ve hicle Saf etyA ct of 1966". #
Step1:loca tethes tatement, "The combined
we ight of occupant sand cargo should ne ver
exc eed XXX kgor XXX lbs." on theT irea nd
Loading In form atio nplacar dofy ourvehicle. #
Step2:de term ine thec ombined weight of
th ed rive ra nd passenger sthat will be tra vel‐
ing in your vehicle. #
Step3:subtract thec ombined weight of the
driver and passenger sfromX XXkgor
XXX lbs. #
Step4:th eresulting figur eequals thep er‐
missible amount of cargo and luggag eload
capacity .For example, if the" XXX" amount
equals 1,400 lbs and ther ew ill be five 150lb
passenger sinyourvehicle, thea mount of
av ailable cargo and luggag eload capacity is
65 0lbs (1,40 0–750 (5 x150) =650 lbs). #
Step5:de term ine thec ombined weight of
luggag eand cargo being loaded on thev ehi‐
cle. Fors afet yr easons, this we ight mus tnot
exc eed thec argo and luggag eload capacity
calculated in step 4. #
Step6: Even if
youh avec alculated thet otal load care‐
full y,yo us houl dstillm akes uret hat them axi‐
mum permissible gross weight and them aximum
gross axle weight rating of your vehicle ar enot
exc eeded. Information fort his can be found on
th ev ehicle identification plate. #
Weigh thel aden vehicle, including driver ,pas‐
senger sand load, on asuitable vehicle weigh‐
bridge.
The measured values mus tnotexc eed the
maximu mpermitted values lis tedont hevehi‐
cle identification plate.
Ad ditional related subjects:
R Sample calculation ford etermining them axi‐
mum load (/ page254)
R Tire and Loadin gInforma tionp lacard
(/ page253)
R Tire pressur etable
R Vehicle identification plate Sample calculation
ford eter mi ning them axi‐
mu mload The
following table has examples of ho wtocalcu‐
la te tota la nd cargo load capacities wit hvarying
seatin gconfigurations and dif fere nt number sand
size sofo ccupants. The following examples use a
maximum load of 1,500 lbs (680 kg).This value
is fori llustrativ epurposes on ly.Mak esurey ou
ar eu singthe actual load limit fory our vehicle
st ated on your vehicle's Tire and Loadin gInfor‐
mation pl acard( / pag e253).
The highe rthe weight of all theo ccupants, the
smaller them aximum load forl ug gage.
Ste p1 Example
1E xamp le 2
Combine dmaximum weight of
occupant sand load (dat afrom
th eT irea nd Loading In form a‐
tio np lacard) 15
00 lbs (680 kg)1 500 lbs (680kg) 254
Wheels and tires