515
uuReplacing Light Bulbs uSide Marker Light Bulbs
Continued
Maintenance
Side Marker Light Bulbs
When replacing, use the following bulbs.
1.Turn the socket counter-clockwise and
remove it.
2. Remove the old bulb and insert a new bulb.
Fog Light Bulbs*
When replacing, use the following bulbs.
1.Remove the screws using a Phillips-head
screwdriver and remove the holding clips
using a flat-tip screwdriver.
2. Pull the under part of the inner fender cover
down.
Side Marker Light: 3CP
Bulb
Socket
Fog Light: 35W (H8 for halogen bulb type)
1Fog Light Bulbs*
NOTICE
Halogen bulbs get very hot wh en lit. Oil, perspiration,
or a scratch on the glass can cause the bulb to
overheat and shatter.
When replacing a halogen bulb, handle it by its
plastic case, and protect th e glass from contact with
your skin or hard objects. If you touch the glass, clean
it with denatured alc ohol and a clean cloth.
Cover
Screw
Clip
* Not available on all models
20 FIT-31T5A6500.book 515 ページ ２０１９年９月２６日 木曜日 午後４時４１分
