2020 FORD MUSTANG ECO mode

[x] Cancel search: ECO mode

Page 106 of 464

FORD MUSTANG 2020  Owners Manual Doors and Locks
Action
Message
The driver door is not completely closed.
Driver Door Ajar
The passenger door is not completely closed.
Passenger Door Ajar
The trunk is not completely closed.
Trunk Aja

Page 107 of 464

FORD MUSTANG 2020  Owners Manual Exhaust Mode
Action
Message
Indicates that the exhaust state selected, through the menuor drive mode selection, is for use on the track and may not comply with local noise regulations. Only on vehicle

Page 108 of 464

FORD MUSTANG 2020  Owners Manual Action
Message
You have successfully programmed an intelligent access key to the system.
Key Program Successful
You have failed to program an intelligent access key to thesystem.
Key Program Failure
Y

Page 115 of 464

FORD MUSTANG 2020  Owners Manual Use air conditioning with recirculated air
to improve cooling performance and
efficiency.
Note:
In certain conditions such as
maximum defrost, the air conditioning
compressor may continue to operate e

Page 116 of 464

FORD MUSTANG 2020  Owners Manual Setting the Temperature
Press the toggle button on the left-hand
side of the climate control upward or
downward to set the left-hand
temperature.
Note:
This control also adjusts the
right-hand side te

Page 117 of 464

FORD MUSTANG 2020  Owners Manual Switching Recirculated Air On and
Off
Press and release the button to
switch between outside air and
recirculated air.
The air currently in the passenger
compartment recirculates. This may
reduce the

Page 118 of 464

FORD MUSTANG 2020  Owners Manual 4. Adjust the blower motor speed to the
lowest speed setting.
Defogging the Side Windows in
Cold Weather
1. Direct air to the instrument panel and windshield air vents.
2. Press and release A/C.
3. Ad

Page 119 of 464

FORD MUSTANG 2020  Owners Manual 2.
Adjust the temperature function to the
setting you prefer. Use 72°F (22°C) as
a starting point, then adjust the setting
as necessary.
Defogging the Side Windows in
Cold Weather
1. Press and relea