Page 375 of 530
When givingstarting assistance, alwaysmake surethatyou onlyconnect bat‐teryterminals with identical polarity.
Duringstarting assistance,you mustobservethe described orderfor con‐necting and disconnectingthe jumpercables.
Do not connect or disconnectthe bat‐teryclamps whilethe engine isrunning.
\nWARNINGRisk ofexplosion duringcharging process andstarting assistance
Duringthecharging process andstartingassistance,the battery mayrelease anexplo‐sivegas mixture.
Avoidfire, openflames, creating sparksand smoking.
Make surethatthere is sufficientventi‐lation duringthecharging process andduringstarting assistance.
Do not leanover a battery.
\nWARNINGRisk ofexplosion from a fro‐zen battery
A discharged battery may freeze attempera‐tures slightly aboveor below freezing point.
Duringstarting assistance or batterycharg‐ing, batterygas may bereleased.
Alwaysthawa frozen batteryoutfirstbeforecharging it or performingstart‐ing assistance.
Ifthe indicator/warning lamps inthe instrumentcluster do not light up at lowtemperatures, it isverylikelythatthe discharged battery has fro‐zen. Inthis caseyou may neither jump-startthevehicle norchargethe battery.
The service life of a batterythat has beenthawed may be dramatically shortened. Thestartingcharacteristics may be impaired, espe‐cially at lowtemperatures.
It isrecommendedthatyou haveathawed bat‐terychecked at aqualified specialistworkshop.
Allvehicles
NOTEDamagecausedbynumerous orextended attemptstostartthe engine
Numerous orextended attemptstostarttheengine may damagethe catalytic converterduetonon-combusted fuel.
Avoid numerous andextended attemptstostartthe engine.
Observethefollowing points duringstartingassistance and whenchargingthe battery:
ROnly use undamaged jumper cables/charg‐ing cables with a sufficient cross-section andinsulatedterminal clamps.
RNon-insulated parts oftheterminal clampsmust not come into contact withother metalparts whilethe jumper cable/charging cableis connectedtothe battery/jump-startcon‐nection point.
RThe jumper cable/charging cable must notcome into contact withany parts which maymovewhenthe engine isrunning.
Breakdown assistance373
Page 376 of 530
RAlways make surethat neitheryou northebattery is electrostaticallycharged.
RKeepawayfromfireand openflames.
RDo not leanoverthe battery.
Observethe additionalfollowing points whenchargingthe battery:
ROnly use batterychargerstested andapprovedfor Mercedes-Benz.
RReadthe batterycharger's operating instruc‐tions beforechargingthe battery.
Observethe additionalfollowing points duringstarting assistance:
RStarting assistance may only be providedusing batteries with a nominalvoltage of12V.
RThevehicles must nottouch.
RGasoline engine:Onlyacceptstarting assis‐tance ifthe engine andexhaust system arecold.
Starting assistance andchargingthe12 Vbattery
Requirements:RThevehicle is secured withthe electric park‐ing brake.
RVehicles with automatic transmission:The transmission is in position ].
RThe ignition and all electrical consumers areswitched off.
RThe hood is open.
Slide cover1of positive clamp2onthejump-starting connection point inthe direc‐tion ofthe arrow.
Connect positive clamp2onyourvehicletothe positive pole ofthe donor battery usingthe jumper cable/charging cable. Alwaysbegin with positive clamp2onyourownvehiclefirst.
374Breakdown assistance
Page 377 of 530
Duringstarting assistance:starttheengine ofthe donorvehicle andrun at idlespeed.
Connectthe negative pole ofthe donor bat‐teryandground point3ofyourownvehiclebyusingthe jumper cable/charging cable.Begin withthe donor batteryfirst.
Duringstarting assistance:starttheengine ofyourownvehicle.
Duringthecharging process:startthecharging process.
Duringstarting assistance:letthe enginesrunfor several minutes.
Duringstarting assistance:before discon‐nectingthe jumper cable, switch on an elec‐trical consumer inyourownvehicle, e.g.therear windowheater or lighting.
Whenthestarting assistance/charging processis complete, performthefollowingsteps:
First,removethe jumper cable/chargingcable from ground point3andthe negativepole ofthe donor battery,then from positiveclamp2andthe positive pole ofthe donor
battery.Begin eachtime with the contactsonyourownvehiclefirst.
Afterremovingthe jumper cable/chargingcable, close cover1of positive clamp2.
Further information can be obtained at aquali‐fied specialistworkshop.
Replacing the12V battery
Observethe notes onthe12V battery(→page370).
Mercedes-Benzrecommendsthatyou havethe12V batteryreplaced at aqualified specialistworkshop, e.g. at an authorized Mercedes-BenzCenter.
Observethefollowing notes ifyouwanttoreplacethe batteryyourself:
RAlwaysreplace afaulty batterywith a batterywhich meetsthe specificvehiclerequire‐ments.
Thevehicle is equipped with anAGMtechnol‐ogy battery (Absorbent Glass Mat) or a lith‐ium-ion battery.Fullvehicle functionality is
only guaranteed with anAGM battery or lith‐ium-ion battery.For safetyreasons,Mercedes-Benzrecommendsthatyou onlyuse batteries which havebeentested andapprovedforyourvehiclebyMercedes-Benz.
RCarryover detachable parts, such asventhoses, elbowfitting orterminal coversfromthe battery beingreplaced.
RMake surethatthevent hose is alwayscon‐nectedtothe original opening onthe side ofthe battery.
Install anyexisting or supplied cell caps.
Otherwise,gases or battery acid couldescape.
RMake surethat detachable parts arerecon‐nected inthe sameway.
Towstarting ortowingaway
Permittedtowing methods
Mercedes-Benzrecommends transportingyourvehicle inthe case of a breakdown,ratherthantowing itaway.
Breakdown assistance375