2019 MAZDA MODEL CX-30 Skyactiv x

Israel/Gradient up to 12%
MODEL TOTAL TRAILER WEIGHTGROSS COMBINA-
TION WEIGHT
EngineTra n s m i s -
sionDrive sys-
temTrailer without
brakeTrailer with brake Trailer with brake
SKYACTIV-G
2.0Automatic
transmissionFWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,236 kg (7,134.0
lb)
SKYACTIV-G
2.5Automatic
transmissionFWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,239 kg (7,140.6
lb)
SKYACTIV-X
2.0Automatic
transmissionFWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,309 kg (7,295.0
lb)
TRAILER NOSE WEIGHT: 80 kg (176.3 lb)
South Africa/Gradient up to 12%
MODEL TOTAL TRAILER WEIGHTGROSS COMBI-
NATION WEIGHT
Engine TransmissionDrive
systemi-stop
systemTrailer without
brakeTrailer with brake Trailer with brake
SKYACTIV-G
2.0Manual
transmissionFWDŠ600 kg (1,322.7
lb)1,200 kg
(2,645.5 lb)3,107 kg
(6,849.6 lb)
SKYACTIV-G
2.0Manual
transmissionFWD ×600 kg (1,322.7
lb)1,200 kg
(2,645.5 lb)3,112 kg
(6,860.7 lb)
SKYACTIV-G
2.0Automatic
transmissionFWD ×600 kg (1,322.7
lb)1,200 kg
(2,645.5 lb)3,137 kg
(6,915.8 lb)
SKYACTIV-G
2.0Automatic
transmissionAWD ×600 kg (1,322.7
lb)1,200 kg
(2,645.5 lb)3,200 kg
(7,054.7 lb)
×: Available
Š: Not available
TRAILER NOSE WEIGHT: 80 kg (176.3 lb)
WARNING
Always keep tow loads within specified limits as indicated in the Trailer
Towing-Load Table:
Attempting to tow loads greater than those
specified is dangerous as it may cause
serious handling and performance problems that could result in personal injury or
vehicle damage, or both.
Before Driving
To w i n g
3-64

Smart Brake Support (SBS)*..........
........................................ 4-175
Smart Brake Support [Rear] (SBS-
R)
*.................................... 4-177
Smart Brake Support [Rear
Crossing] (SBS-RC)
*........... 4-181
360° View Monitor
*........... 4-185
Forward Sensing Camera
(FSC)
*............................... 4-216
Front Radar Sensor
*........... 4-220
Front Side Radar Sensor
*.... 4-222
Rear Side Radar Sensor
*..... 4-224
Rear/Rear corner/Rear Side
Ultrasonic Sensor
*.............. 4-225
Front Camera/Side Cameras/
Rear Camera
*.................... 4-226
Driver Monitoring Camera
*..........
........................................ 4-226
Cruise Control......................4-228
Cruise Control
*.................. 4-228
Tyre Pressure Monitoring System
(TPMS)................................ 4-232
Tyre Pressure Monitoring System
(TPMS)
*.............................4-232
Petrol Particulate Filter.......... 4-236
Petrol Particulate Filter
(SKYACTIV-X 2.0).............. 4-236
Diesel Particulate Filter.......... 4-237
Diesel Particulate Filter
(SKYACTIV-D 1.8)............. 4-237
Rear View Monitor................4-238
Rear View Monitor
*........... 4-238
Parking Sensor System........... 4-252
Parking Sensor System
*....... 4-252
*Some models.4-3

ACC (Accessory)
Some electrical accessories will
operate and the indicator light (amber)
illuminates.
In this position the steering wheel is
unlocked.
NOTE
The keyless entry system does not
function while the push button start
has been pressed to ACC, and the
doors will not lock/unlock even if they
have been locked manually.
ON
This is the normal running position
after the engine is started. The
indicator light (amber) turns off. (The
indicator light (amber) illuminates
when the ignition is switched ON and
the engine is not running.)
Some indicator lights/warning lights
should be inspected before the engine
is started.
Refer to Warning/Indicator Lights on
page 4-32.
Refer to Indication/Indicator Lights on
page 4-34.
NOTE
(SKYACTIV-G 2.0, SKYACTIV-G 2.5,
SKYACTIV-X 2.0)
When the push button start is pressed
to ON, the sound of the fuel pump
motor operating near the fuel tank can
be heard. This does not indicate an
abnormality.
Starting the Engine
▼Starting the Engine
WARNING
Radio waves from the key may affect
medical devices such as pacemakers:
Before using the key near people who
use medical devices, ask the medical
device manufacturer or your physician
if radio waves from the key will affect
the device.
NOTE
xThe key must be carried because the
key carries an immobilizer chip that
must communicate with the engine
controls at short range.
xThe engine can be started when the
push button start is pressed from off,
ACC, or ON.
xThe push button start system
functions (function which can start
the engine by only carrying the key)
can be deactivated to prevent any
possible adverse effect on a user
wearing a pacemaker or other
medical device. If the system is
deactivated, you will be unable to
start the engine by carrying the key.
Consult an expert repairer (we
recommend an Authorised Mazda
Repairer) for details. If the push
button start system functions have
been deactivated, you can start the
engine by following the procedure
indicated when the key battery goes
dead.
Refer to Engine Start Function When
Key Battery is Dead on page 4-8.
xAfter starting a cold engine, the
engine speed increases and a
whining sound from the engine
compartment can be heard.
When Driving
Start/Stop Engine
4-5

xA key from another
manufacturer similar to the key
is in the operational range.
x(Forced engine starting method)
If the KEY warning indication
(red) is displayed, or the push
button start indicator light
(amber) flashes, this could
indicate that the engine may not
start using the usual starting
method (page 7-56). Have your
vehicle inspected at an expert
repairer (we recommend an
Authorised Mazda Repairer) as
soon as possible. If this occurs,
the engine can be force-started.
Press and hold the push button
start until the engine starts. Other
procedures necessary for starting
the engine, such as having the key
in the cabin, and depressing the
clutch pedal (manual
transmission) or the brake pedal
(automatic transmission) are
required.
xWhen the engine is force-started,
the KEY warning indication (red)
remains displayed and the push
button start indicator light
(amber) remains flashing.
x(Automatic transmission)
When the selector lever is in the
neutral (N) position, the push
button start indicator light (green)
does not turn on.
7. Press the push button start after the
push button start indicator light
(green) turns on.
NOTE
xAfter starting the engine, the push
button start indicator light
(amber) turns off and the ignition
switches to the ON position.
x(SKYACTIV-G 2.0, SKYACTIV-G
2.5, SKYACTIV-X 2.0)
After pressing the push button
start and before the engine starts,
the operation sound of the fuel
pump motor from near the fuel
tank can be heard, however, this
does not indicate a malfunction.
x(SKYACTIV-D 1.8)
xThe starter does not rotate until
the glow indicator light turns
off.
xIf the ignition is left switched
ON for a long period of time
without the engine running
after the glow plugs are
warmed up, the glow plugs may
warm up again which will
illuminate the glow indicator
light.
xWhen starting the engine, do
not release the clutch pedal
(manual transmission) or the
brake pedal (automatic
transmission) until the glow
indicator light in the instrument
cluster turns off and the engine
starts, after pressing the push
button start.
xIf the clutch pedal (manual
transmission) or the brake
pedal (automatic transmission)
is released before the engine
starts, depress the clutch pedal
(manual transmission) or the
brake pedal (automatic
transmission) again and press
the push button start to start
the engine.
8. After starting the engine, let it idle
for about 10 seconds (Prohibited in
Germany).
When Driving
Start/Stop Engine
4-7

NOTE
x(Germany)
Drive immediately after starting
the engine. However do not use
high engine speeds until reaching
the operating temperature.
x(SKYACTIV-G 2.0, SKYACTIV-G
2.5,
SKYACTIV-X 2.0)
xWhether the engine is cold or
warm, it should be started
without the use of the
accelerator.
xIf the engine does not start the
first time, refer to Starting a
Flooded Engine under
Emergency Starting. If the
engine still does not start, have
your vehicle inspected by an
expert repairer (we recommend
an Authorised Mazda Repairer)
(page 7-42).
x(SKYACTIV-D 1.8)
If the ambient temperature is
lower than about >+ 10 °C (14
°F), the maximum engine speed
may not be attained for about 3
minutes after the engine starts to
protect the engine.
x(Manual transmission vehicle
with i-stop function)
If the engine has stopped due to
stalling , it can be restarted by
depressing the clutch pedal
within 3 seconds of the engine
stopping.
The engine cannot be restarted
even if the clutch pedal is
depressed under the following
conditions:
xThe driver's door is open.xThe driver's seat belt is
unfastened.
xThe clutch pedal is not released
completely after the engine
stalled.
xThe clutch pedal is depressed
with the engine not stopped
completely.
▼Engine Start Function When Key
Battery is Dead
CAUTION
When starting the engine by holding
the transmitter over the push button
start due to a dead key battery or a
malfunctioning key, be careful not to
allow the following , otherwise the
signal from the key will not be received
correctly and the engine may not start.
¾Metal parts of other keys or metal
objects touch the key.
¾Spare keys or keys for other vehicles
equipped with an immobilizer
system touch or come near the key.
¾Devices for electronic purchases, or
security passage touch or come near
the key.
If the engine cannot be started due to
a dead key battery, the engine can be
started using the following procedure:
1. Continue to depress the brake
pedal firmly until the engine has
completely started.
2.(Manual transmission)
Continue to depress the clutch
pedal
firmly until the engine has
completely started.
When Driving
Start/Stop Engine
4-8

possible. If this occurs, the engine can
be force-started. Press and hold the
push button start until the engine
starts. Other procedures necessary for
starting the engine such as having the
key in the cabin, and depressing the
clutch pedal (manual transmission) or
the brake pedal (automatic
transmission) are required.Turning the Engine Off
▼Turning the Engine
Off
WARNING
Do not stop the engine while the
vehicle is moving:
Stopping the engine while the vehicle
is moving for any reason other than in
an emergency is dangerous. Stopping
the engine while the vehicle is moving
will result in reduced braking ability
due to the loss of power braking ,
which could cause an accident and
serious injury.
1. Stop the vehicle completely.
2.(Manual transmission)
Shift into neutral and set the
parking brake.
(Automatic transmission)
Shift the selector lever to the P
position and set the parking brake.
3. Press the push button start to turn
off the engine. The ignition position
is off.
CAUTION
¾When leaving the vehicle, make sure
the push button start is off.
¾(SKYACTIV-D 1.8)
If the engine is started and stopped
repeatedly before it warms up, the
engine may speed up while the
vehicle is stopped to clean the
engine internally. Do not stop the
engine until the engine returns to
running at its normal speed.
When Driving
Start/Stop Engine
4-10

2. When the accelerator pedal is
depressed or the RES switch is
operated while the vehicle is kept
stopped by the MRCC with Stop &
Go function/CTS, the engine
automatically restarts. The engine
restarts automatically when the
accelerator pedal is depressed with
the selector lever in the D/M
position (not in second gear fixed
mode).
(When the vehicle is stopped by the
AUTOHOLD function)
1. When the brake pedal is depressed
while the vehicle is being driven
(except for driving in the R or M
position second gear fixed mode)
and the vehicle is brought to a stop,
the i-stop function will operate and
it continues to operate even if the
brake is released.
2. The engine restarts automatically
when the accelerator pedal is
depressed with the selector lever in
the D/M position (not in second
gear fixed mode).
3. If the selector lever is in the N or P
position, the engine does not
restart when the brake pedal is
released. The engine restarts when
the brake pedal is depressed again
or the selector lever is shifted to the
D, M (not in second gear fixed
mode) or the R position. (For the
purposes of safety, always keep the
brake pedal depressed when
shifting the selector lever while
engine idling is stopped.)
Engine idle stopping and restarting
while driving (With M Hybrid)
(When not using MRCC with Stop &
Go function/CTS)
1. Engine idling stops when the
vehicle speed is about 20 km/h (12
mph) or slower after depressing the
brake pedal while driving the
vehicle (in D position).
2. The engine restarts automatically
after releasing the brake pedal with
the selector lever in the D position.
(When using MRCC with Stop & Go
function/CTS)
1. Engine idling stops when the
vehicle speed is about 20 km/h (12
mph) or slower after decelerating
the vehicle a certain amount or
more while in headway control
using the MRCC with Stop & Go
function/CTS.
2. If it is necessary to accelerate while
in headway control using the MRCC
with Stop & Go function/CTS, the
engine restarts automatically.
Operation conditions
Under the following conditions, engine
idling stops and the i-stop indicator
light (green) turns on.
x(SKYACTIV-G 2.0,
SKYACTIV-G 2.5,
SKYACTIV-X 2.0)
The engine is warmed up.
x(SKYACTIV-D 1.8)
The engine is not cold.
xThe engine has been started and the
vehicle is driven for a certain period.
xThe engine is started with the bonnet
closed.
xAll doors, liftgate, and bonnet are
closed.
xThe driver's seat belt is fastened.xThe air conditioner is not operating
with the airflow mode in the
position.xThe temperature setting dial of the
air conditioner is in a position other
than maximum heating or maximum
cooling (A/C ON) position.
x(Automatic air-conditioning)
The vehicle's interior temperature
and the set temperature for the air
conditioner are nearly the same.
When Driving
Start/Stop Engine
4-13

position if force is applied to the
steering wheel. Release the force
applied to the steering wheel to
stop engine idling).
xThe vehicle is stopped by
depressing the brake pedal.
xThe vehicle is not driven on a
slope.
xThe vehicle is not stopped
suddenly.
NOTE
Under the following conditions, a
period of time is required to stop
engine idling
xThe battery power is depleted for
some reasons such as the vehicle has
not been driven for a long period.
xThe ambient temperature is high or
low.
xAfter the battery terminals are
disconnected for some reasons such
as for battery replacement.
x(SKYACTIV-D 1.8)
After PM removal is performed by
the diesel particulate filter.
Engine does not restart
If the following operations are
performed while the idling is stopped,
the engine will not restart for safety
reasons. In such cases, start the engine
using the normal method.
x(European model)
xThe bonnet is opened.xThe driver's seat belt is unfastened
and the driver's door is opened.
x(With M Hybrid)
xAutomatic transmission
The driver's seat belt is unfastened
and the driver's door is opened.
xManual transmission
The driver's door is opened.
Engine-stop period is short or time
until next engine idle stop is long
xThe ambient temperature is high or
low.
xThe battery power is depleted.xPower consumption by the vehicle's
electrical parts is high.
Engine restarts automatically while
engine idling is stopped
Under the following conditions, the
engine restarts automatically.
xThe i-stop OFF switch is pressed until
the beep sounds.
xThe air conditioner is operated with
the airflow mode in the
position.xThe temperature setting dial of the
air conditioner is in the maximum
heating or maximum cooling (A/C
ON) position.
x(Automatic air-conditioning)
The cabin temperature is largely
different from the set temperature of
the air conditioner.
xThe brakes are released slightly on a
slope and the vehicle begins to
move.
xTwo minutes have elapsed since the
idling was stopped.
xThe battery power is depleted.x(Automatic transmission)
Engine idling is stopped while the
vehicle is stopped
xThe accelerator pedal is depressed
with the selector lever in the D or
M (not in second gear fixed mode)
position.
xThe selector lever is shifted to the R
position.
xThe selector lever is shifted from N
or P position to D or M (not in
second gear fixed mode) position.
When Driving
Start/Stop Engine
4-15