2019 MAZDA MODEL CX-30 charging

▼Deceleration Regeneration Charge
Display (M Hybrid)
This displays the status of the charging
produced by deceleration
regeneration.
Refer to M Hybrid on page 4-86.
▼Vehicle Speed Alarm*
In this mode, the current setting for the
vehicle speed alarm is displayed. You
can change the vehicle speed setting at
which the warning is triggered.
NOTE
The vehicle speed alarm display is
activated at the same time the beep
sound is heard.
1. “Speed Alert” message is displayed

The vehicle speed alarm can be set
using the centre display.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
NOTE
Always set the vehicle speed according
to the laws and regulations of the
country/city in which the vehicle is
driven. In addition, always verify the
speed of the vehicle using the
speedometer.
▼i-ACTIVSENSE Display
Displays the system status.

xRefer to Lane Departure Warning
System (LDWS) on page 4-105.
xRefer to Blind Spot Monitoring
(BSM) on page 4-109.
xRefer to
Tra ffi c Sign Recognition
System (TSR) on page 4-113.
xRefer to Distance & Speed Alert
(DSA) on page 4-119.
xRefer to Driver Attention Alert (DAA)
on page 4-120.
xRefer to Driver Monitoring (DM) on
page 4-122.
xRefer to Front Cross Traffic Alert
(FCTA) on page 4-123.
xRefer to Mazda Radar Cruise Control
(MRCC) on page 4-131.
xRefer to Mazda Radar Cruise Control
with Stop & Go function (MRCC
with Stop & Go function) on page
4-141.
xRefer to Cruising & Traffic Support
(CTS) on page 4-152.
xRefer to Lane-keep Assist System
(LAS) on page 4-165.
xRefer to Adjustable Speed Limiter
(ASL) on page 4-166.
When Driving
Instrument Cluster and Display
4-30*Some models.

▼Warning Indication/Warning Lights
These lights turn on or flash to notify the user of the system operation status or a
system malfunction.
Signal Warning Refer to
(Red)Brake System Warning Indication/Warning Light
*17-49
ABS Warning Indication/Warning Light*1
Electronic
Brake Force
Distribution
System Warn-
ing
7-50
ABS warning
7-52
Charging System Warning Indication/Warning Light*17-50
Engine Oil Warning Indication/Warning Light*17-50
High Engine Coolant Temperature Warning Indication 7-51
Power Steering Malfunction Indication/Indicator Light*17-51
Master Warning Indication 7-52
(Amber)Brake Control System Warning Indication/Warning Light
*17-52
Brake Override Warning Indication 7-53
Check Engine Indication/Light*17-53
Petrol Particulate Filter Warning Indication/Warning Light*1(SKYAC-
TIV-X 2.0)7-54
Diesel Particulate Filter Warning Indication/Warning Light
*1(SKYAC-
TIV-D 1.8)7-54
When Driving
Instrument Cluster and Display
4-32

Lighting Control
▼Headlights
Turn the headlight switch to turn the headlights and other exterior lights on or off.
When the tail lights, position lights, and the number plate lights are turned on, the
lights-on indicator light in the instrument cluster turns on.

NOTE
xTo prevent discharging the battery, do not leave the lights on while the engine is
off unless safety requires them.
xHeadlights do not blind drivers approaching in the opposite direction no matter
what side of the road you must drive your vehicle (left-hand or right-hand traffic).
Therefore, it is not necessary to adjust the optical axis of the headlights when
switching temporarily to driving on the opposite side of the road (left-hand or
right-hand traffic).
Without auto-light control
Ignition Position ACC or OFF ON
Switch Position OFF
OFF
Headlights Off Off Off Off Off On
Running lights
*Off Off Off
On*1On*1*2Off
Tail lights
Position lights
Number plate
lightsOffOn
Off OffOn On
When Driving
Switches and Controls
4-54*Some models.

▼Electric Parking Brake (EPB)
The EPB system applies the parking
brake using an electric motor. The
system can operate automatically and
manually.
The EPB switch indicator light turns on
when applying the parking brake and it
turns off when releasing the parking
brake.
1. Indicator light
WARNING
Do not drive the vehicle with the
parking brake applied:
If the vehicle is driven with the parking
brake applied, the brake parts may
generate heat and the brake system
may not operate, leading to an
accident.
Before driving the vehicle, release the
parking brake and make sure that the
EPB indicator light in the instrument
cluster turns off.
Apply the parking brake when leaving
the vehicle:
Not applying the parking brake when
parking the vehicle is dangerous as the
vehicle may move unexpectedly and
result in an accident. Before leaving the
vehicle, apply the parking brake and
make sure that the EPB indicator light
in the instrument cluster turns on.
NOTE
xThe parking brake cannot be applied
or released while the vehicle battery
is dead.
Refer to If a Jump-Starting on page
7-39.
xWhen the charging system warning
light in the instrument cluster turns
on, the parking brake cannot be
applied after switching the ignition
OFF. Before switching the ignition
OFF, apply the parking brake
manually.
xThe sound of the parking brake being
applied or released can be heard,
however, this does not indicate a
problem.
xIf the EPB is not used for long
periods, an automatic inspection of
the system is performed while the
vehicle is parked. An operation
sound can be heard, however, this
does not indicate a problem.
xWhen applying the parking brake
and switching OFF the ignition, an
operation sound can be heard,
however, this does not indicate a
problem.
xThe brake pedal may move while
applying or releasing the parking
brake, however, this does not
indicate a problem.
xIf there is a problem with the brake
system (foot brake) while driving the
vehicle, continually pulling up the
EPB switch will apply the brakes and
decelerate or stop the vehicle. The
parking brake on-reminder sound is
activated while the brake is applied.
In addition, when releasing the
switch, the brake is released and the
sound stops.
When Driving
Brake
4-70

Charging the M Hybrid battery
The M Hybrid battery is charged
automatically by the engine power and
deceleration regeneration. Therefore, it
is not necessary to charge the battery
from outside of the vehicle.
CAUTION
Drive the vehicle for about 30 minutes
once every few months because
self-discharge occurs gradually if the
vehicle is not driven for a long period
of time. If the M Hybrid battery
becomes completely discharged and
M Hybrid cannot be activated, contact
an expert repairer (we recommend an
Authorised Mazda Repairer).
▼M Hybrid Precautions
For vehicle maintenance or repairs, or
when scrapping the vehicle, consult an
expert repairer (we recommend an
Authorised Mazda Repairer).
Handling the M Hybrid battery
Technical knowledge and skill are
necessary in handling the M Hybrid
battery.
WARNING
To ensure safe and correct handling of
the M Hybrid battery, always heed the
following precautions:
¾Do not remove the M Hybrid battery.
¾Do not resell, transfer, or modify the
M Hybrid battery.
¾Do not use the battery on vehicles
other than those equipped with the
M Hybrid battery.
If the M Hybrid battery is not handled
properly, the following may occur and
cause serious injury:
¾Touching an unattended or illegally
abandoned M Hybrid battery may
cause electrocution.
¾If the M Hybrid battery is used on a
vehicle other than one equipped
with M Hybrid (including modified
vehicles), accidents such as
electrocution, heat generation,
smoking, combustion, and
explosions, or an electrolyte leakage
may occur.
Scrapping Your Vehicle and Disposing
of the M Hybrid battery
The M Hybrid battery is salvaged to
prevent accidents involving it. When
scrapping your vehicle, replacing the M
Hybrid battery, or disposing of the M
Hybrid battery, consult an expert
repairer (we recommend an
Authorised Mazda Repairer). Please
cooperate in ensuring that the vehicle's
M Hybrid battery is salvaged.
WARNING
Dispose of the M Hybrid battery
appropriately:
If the M Hybrid battery is not salvaged
and disposed of appropriately, such as
by leaving it unattended or illegally
abandoning it, some other person may
touch it which could cause
electrocution leading to serious injury.
If an Accident Occurs
If the vehicle receives an impact of a
certain level or greater in a collision, M
Hybrid may stops. In this case, the
charging system warning light turns on
and M Hybrid cannot activate. Park the
vehicle in a safe place immediately and
contact an expert repairer (we
When Driving
M Hybrid
4-88

¾Depending on the device connected
to the accessory socket, the vehicle's
electrical system may be affected,
which could cause the warning light
to illuminate. Disconnect the
connected device and make sure
that the problem is resolved. If the
problem is resolved, disconnect the
device from the socket and switch
the ignition off. If the problem is not
resolved, consult an expert repairer
(we recommend an Authorised
Mazda Repairer).
NOTE
To prevent discharging of the battery,
do not use the socket for long periods
with the engine off or idling.
Connecting the accessory socket
1. Open the lid.
2. Pass the connection plug cord
through the cutout of the console
and insert the plug into the
accessory socket.

1. Plug
Cup Holder
▼Cup Holder
WARNING
Never use a cup holder to hold hot
liquids while the vehicle is moving:
Using a cup holder to hold hot liquids
while the vehicle is moving is
dangerous. If the contents spill, you
could be scalded.
Do not put anything other than cups
or drink cans in cup holders:
Putting objects other than cups or
drink cans in a cup holder is
dangerous.
During sudden braking or
manoeuvring, occupants could be hit
and injured, or objects could be
thrown around the vehicle, causing
interference with the driver and the
possibility of an accident. Only use a
cup holder for cups or drink cans.
Interior Features
Interior Equipment
5-36

Always keep batteries out of
the reach of children:
Allowing children to play near batteries
is dangerous. Battery fluid could cause
serious injuries if it gets in the eyes or
on the skin.
Keep flames and sparks away
from open battery cells and do not
allow metal tools to contact the
positive (+) or negative (-) terminal of
the battery when working near a
battery. Do not allow the positive (+)
terminal to contact the vehicle body:
Flames and sparks near open battery
cells are dangerous. Hydrogen gas,
produced during normal battery
operation, could ignite and cause the
battery to explode. An exploding
battery can cause serious burns and
injuries. Keep all flames including
cigarettes and sparks away from open
battery cells.
Keep all flames and sparks
away from open battery cells because
hydrogen gas is produced from open
battery cells while charging the
battery or adding battery
fluid:
Flames and sparks near open battery
cells are dangerous. Hydrogen gas,
produced during normal battery
operation, could ignite and cause the
battery to explode. An exploding
battery can cause serious burns and
injuries. Keep all
flames including
cigarettes and sparks away from open
battery cells.
NOTE
Before performing battery
maintenance, remove the battery
cover.

▼Battery Maintenance
To get the best service from a battery:
xKeep it securely mounted.xKeep the top clean and dry.xKeep terminals and connections
clean, tight, and coated with
petroleum jelly or terminal grease.
xRinse off spilled electrolyte
immediately with a solution of water
and baking soda.
xIf the vehicle will not be used for an
extended time, disconnect the
battery leads and charge the battery
every 6 weeks.
Maintenance and Care
Owner Maintenance
6-37

▼Inspecting Electrolyte Level
A low level of electrolyte fluid will
cause the battery to discharge quickly.

1. Upper level
2. Lower level
Inspect the electrolyte level at least
once a week. If it is low, remove the
caps and add enough distilled water to
bring the level between the upper and
lower level (illustration).

Do not overfill.
Examine the specific gravity of the
electrolyte with a hydrometer,
especially during cold weather. If it is
low, recharge the battery.
▼Battery Recharging
NOTE
xBefore performing maintenance or
recharging the battery, turn off all
accessories and stop the engine.
xTo disconnect the battery, remove
the negative lead first. Install it last
when connecting the battery.
xBe sure to remove the caps before
recharging the battery.
xDo not quick-charge the battery.
xIf the battery quickly discharges
because, for example, the lights
were left on too long with the engine
off, slow-charge it as required by
battery size and charger capacity.
xIf the battery gradually discharges
because of high electric load while
the vehicle is being used, recharge it
as required by battery size and
charger capacity.
▼Battery Replacement
Contact an expert repairer (we
recommend an Authorised Mazda
Repairer) for a battery replacement
purchase.
Maintenance and Care
Owner Maintenance
6-38