2019 FORD RANGER homelink

UNIVERSAL GARAGE DOOR
OPENER (IF EQUIPPED)
HomeLink Wireless Control
System WARNING:
Do not use the system
with any garage door opener that does
not have the safety stop and reverse
feature as required by U.S. Federal
Safety Standards (this includes any
garage door opener manufactured
before April 1, 1982). A garage door
opener which cannot detect an object,
signaling the door to stop and reverse,
does not meet current federal safety
standards. Using a garage door opener
without these features increases the risk
of serious injury or death.
Note: Make sure that the garage door and
security device are free from obstruction
when you are programming. Do not program
the system with the vehicle in the garage.
Note: Make sure you keep the original
remote control transmitter for use in other
vehicles as well as for future system
programming.
Note: We recommend that upon the sale
or lease termination of your vehicle, you
erase the programmed function buttons for
security reasons. See Erasing the Function
Button Codes
later in this section.
Note: You can program a maximum of
three devices. To change or replace any of
the three devices after it has been initially
programmed, you must first erase the
current settings. See Erasing the Function
Button Codes
. The universal garage door opener replaces
the common hand-held garage door
opener with a three-button transmitter
integrated into the driver
’s sun visor.
The system includes two primary features,
a garage door opener and a platform for
remote activation of devices within the
home. You can program garage doors as
well as entry gate operators, security
systems, entry door locks and home or
office lighting.
Additional system information can be
found online at www.homelink.com,
www.youtube.com/user/HomeLinkGentex
or by calling the toll-free help line at
1-800-355-3515.
In-Vehicle Programming
This process is to program your in-vehicle
HomeLink function button with your
hand-held transmitter.
Note: The programming steps below
assume you will be programming HomeLink
that was not previously programmed. If your
HomeLink was previously programmed, you
may need to erase your HomeLink buttons.
See Erasing the Function Button Codes.
Note: Put a new battery in the hand-held
transmitter. This allows for quicker training
and accurate transmission of the
radio-frequency signal.
125
Ranger (TFG) Canada/United States of America, enUSA, Edition date: 201809, Fourth-Printing Garage Door OpenerE188211

1.
With your vehicle parked outside of the
garage, switch your ignition to the on
position, but do not start your vehicle.
2. Press and release the function button that you would like to program.
3. Hold your hand-held garage door transmitter 1– 3 in (2–8 cm) away from
the HomeLink button you want to
program.
4. Press and hold the hand-held transmitter button you want to
program while watching the indicator
light on HomeLink. Continue to hold
the hand-held button until the
HomeLink indicator light flashes rapidly
or is continuously on.
Note: You may need to use a different
method if you live in Canada or have
difficulties programming your gate operator
or garage door opener. See
Gate Operator
/ Canadian Programming.
5. Press and hold the HomeLink button you programmed for two seconds, then
release. You may need to do this twice
to activate the door. If your garage door
does not operate, watch the HomeLink
indicator light.
If the indicator light stays on, the
programming is complete. Your device
should activate when the HomeLink
button is pressed and released. If the indicator light flashes rapidly, press
and hold for two seconds and release the
programmed HomeLink button. Repeat
the "press/hold/release" sequence up to
three times to complete the programming
process. If your device still does not
operate, you must program your garage
door. See
Programming Your Garage
Door Opener Motor.
To program additional buttons, repeat
Steps 1 – 4.
For questions or comments, please contact
HomeLink at www.homelink.com,
www.youtube.com/user/HomeLinkGentex
or by calling the toll-free help line at
1-800-355-3515.
Programming Your Garage Door
Opener Motor
Note: You may need a ladder to reach the
unit and you may need to remove the cover
or lamp lens on your garage door opener. 1. Press the learn button on the garage
door opener motor and then you have
30 seconds to complete the next two
steps.
2. Return to your vehicle.
126
Ranger (TFG) Canada/United States of America, enUSA, Edition date: 201809, Fourth-Printing Garage Door OpenerE188212 E142659

3.
Press and hold the function button you
want to program for 2 seconds, then
release. Repeat this step. Depending
on your brand of garage door opener,
you may need to repeat this sequence
a third time.
Gate Operator / Canadian
Programming
Canadian radio-frequency laws require
transmitter signals to “time-out” (or quit)
after several seconds of transmission –
which may not be long enough for
HomeLink to pick up the signal during
programming. Similar to this Canadian law,
some U.S. gate operators are designed to
“time-out” in the same manner.
Note: If programming a garage door opener
or gate operator, it is advised to unplug the
device during the “cycling” process to
prevent possible overheating.
1. Press and release, every two seconds,
your hand-held transmitter until the
HomeLink indicator light changes to a
rapidly blinking or continuously on light.
2. Release the hand-held transmitter button.
3. Continue programing HomeLink. See In-Vehicle Programming, Step 4.
Erasing the Function Button Codes
Note: You cannot erase individual buttons. 1. Press and hold the outer two function
buttons simultaneously for
approximately 10 seconds until the
indicator light above the buttons
flashes rapidly.
2. When the indicator light flashes, release the buttons. You erased the
codes for all buttons.
Reprogramming a Single Button
To program a device to a previously trained
button, follow these steps:
1. Press and hold the desired button. Do NOT release the button.
2. The indicator light begins to flash after
20 seconds. Without releasing the
button, follow Step 1 in the
Programming section.
For questions or comments, contact
HomeLink at www.homelink.com,
www.youtube.com/user/HomeLinkGentex
or by calling the toll-free help line at
1-800-355-3515.
127
Ranger (TFG) Canada/United States of America, enUSA, Edition date: 201809, Fourth-Printing Garage Door OpenerE188212 E188213

Tire Pressure Monitoring System..........298
Changing Tires With a Tire Pressure
Monitoring System....................................... 299
Understanding Your Tire Pressure Monitoring System ..................................... 300
Tires See: Wheels and Tires...................................... 281
Towing a Trailer..............................................215
Towing Points................................................232
Towing the Vehicle on Four Wheels...........................................................221
Emergency Towing............................................ 222
Recreational Towing......................................... 222
Towing...............................................................215
Traction Control............................................168
Principle of Operation...................................... 168
Trail Control Indicators................................174
Trail Control
.....................................................174
Trail Control – Troubleshooting..................... 175
Trail Control – Troubleshooting...............175 Trail Control – Information Messages.........175
Trailer Sway Control....................................216
Transmission Code Designation.............319
Transmission..................................................152
Transporting the Vehicle
...........................232
Type Approvals............................................483 China...................................................................... 494
Radio Frequency Certification for Keys and Remote Controls.......................................... 494
Radio Frequency Certifications for Blind Spot Information System.......................... 492
Radio Frequency Certifications for Body Control Module............................................. 494
Radio Frequency Certifications for Cruise Control Module............................................. 494
Radio Frequency Certifications for Mid Range Radar.................................................. 486
Radio Frequency Certifications for Passive Anti-Theft System........................................ 487
Radio Frequency Certifications for Radio Transceiver Module..................................... 490
Radio Frequency Certifications for SYNC 3........................................................................\
.. 493
Radio Frequency Certifications for Tire Pressure Monitoring Sensor(s)...............483
Radio Frequency Certifications for Wireless Charging........................................................... 493Radio Frequency Statement for Audio
Unit.................................................................... 494
U
Under Hood Overview...............................258
Under Seat Storage.....................................132 SuperCab............................................................... 132
Unique Driving Characteristics................139
Universal Garage Door Opener................125 HomeLink Wireless Control System............125
USB Port..........................................................337
Using Adaptive Cruise Control................183 Automatic Cancellation................................... 186
Blocked Sensor................................................... 188
Canceling the Set Speed................................. 186
Changing the Set Speed................................. 186
Detection Issues.................................................. 187
Following a Vehicle............................................ 184
Hilly Condition Usage....................................... 186
Overriding the Set Speed................................ 185
Resuming the Set Speed................................ 186
Setting the Adaptive Cruise Speed.............184
Setting the Gap Distance................................ 185
Switching Adaptive Cruise Control Off........................................................................\
187
Switching Adaptive Cruise Control On........................................................................\
184
Switching to Normal Cruise Control...........189
System Not Available....................................... 188
Using Cruise Control....................................182 Canceling the Set Speed................................. 182
Changing the Set Speed.................................. 182
Resuming the Set Speed................................. 183
Setting the Cruise Speed................................. 182
Switching Cruise Control Off......................... 183
Switching Cruise Control On.......................... 182
Using Four-Wheel Drive.............................156 4WD Indicator Lights........................................ 156
Driving Off-Road With Truck and Utility Vehicles............................................................. 158
How Your Vehicle Differs From Other Vehicles.............................................................. 157
Using the Electronic Shift on the Fly 4WD system............................................................... 156
Using MyKey With Remote Start Systems..........................................................60
507
Ranger (TFG) Canada/United States of America, enUSA, Edition date: 201809, Fourth-Printing Index