2018 Peugeot 208 glove box

4
Instruments and controls1
Door mirrors
Electric windows
2
Bonnet release
3
Dashboard fuses
4
Interior rear view mirror
Courtesy lamp
Interior ambient lighting
Emergency or assistance call
Active City Brake
5
Touch screen
Audio system
Bluetooth audio system
Setting the date and time
6
Ventilation
Heating
Manual air conditioning
Automatic air conditioning
Front demisting/defrosting
Rear screen demisting/defrosting
7
USB socket
12 V socket
8
Manual gearbox
Automatic gearbox
Gear shift indicator
9
Parking brake
10
Glove box
Fuses
Over view

65
AirbagsImpact detection zones
A.Front impact zone.
B. Side impact zone.
The deployment of one or more airbags
is accompanied by a
slight emission of
smoke and a
noise, due to the detonation
of the pyrotechnic charge incorporated in
the system.
This smoke is not harmful, but sensitive
individuals may experience slight irritation.
The detonation noise associated with the
deployment of one or more airbags may
result in a
slight loss of hearing for a short
time.
General information
System designed to contribute towards
improving passenger safety (with the exception
of the rear centre passenger) in the event of
violent collisions. The airbags supplement the
action of the seat belts fitted with force limiters
(all except the centre rear passenger).
If a
collision occurs, the electronic detectors
record and analyse the front and side impacts
sustained in the impact detection zones:
-

i
n the case of a serious impact, the airbags
are deployed instantly and contribute
towards better protection of the occupants
of the vehicle (with the exception of the rear
centre passenger); immediately after the
impact, the airbags deflate rapidly so that
they do not hinder visibility or the exit of the
occupants,
-

i
n the case of a minor or rear impact or
in certain rollover conditions, the airbags
may not be deployed; the seat belt
alone contributes towards ensuring your
protection in these situations.
The airbags do not operate when the
ignition is switched off.
This equipment will only deploy once. If
a
second impact occurs (during the same
or a
subsequent accident), the airbag will
not be deployed again.
Front airbags
This system protects the driver and front
passenger in the event of a severe frontal
impact in order to limit the risk of injury to the
head and chest.
The driver's airbag is fitted in the centre of the
steering wheel; the front passenger's airbag is
fitted in the dashboard above the glove box.
Deployment
The airbags are deployed, except the front
passenger airbag if it is deactivated*, in the
event of a
serious front impact to all or part
of the front impact zone A , in the longitudinal
centreline of the vehicle on a
horizontal plane
and directed from the front to the rear of the
vehicle.
The front airbag inflates between the thorax
and head of the front occupant of the vehicle
and the steering wheel, driver's side, and the
dashboard, passenger's side, to cushion their
for ward movement.
*
F

or more information on Deactivating
the front passenger airbag , refer to the
corresponding section.
5
Safety

133
Third brake lamp
F Unscrew the fixing pins on each side of the lamp unit, without removing them
completely.
F

P
ush on the screws to unclip the lamp unit.
F

D
isconnect the lamp unit connector.
F

R
emove the lamp unit from the outside.
F

T
urn the bulb holder corresponding to the
faulty bulb a
quarter turn and pull it out.
F

P
ull the bulb out and change it.
To refit, carry out these operations in reverse
o r d e r.
Number plate lamps
To facilitate removal, per form this procedure
with the tailgate half open.
F

I
nsert a thin screwdriver into the cut-out
outside the lens.
F

P
ush it outwards.
F

R
emove the lens.
F

R
eplace the faulty bulb.
To refit, press the lens to clip it in.
Foglamp
Make sure to engage the lamp unit in its guides
while keeping it in line with the vehicle.
Tighten sufficiently to ensure sealing, but
without damaging the lamp.
For access, pass your hand under the bumper.
F

T
urn the bulb holder a quarter turn and pull
it out. F
D isconnect the bulb connector.
F

P
ull the bulb out and change it.
To refit, carry out these operations in reverse
o r d e r.
For the replacement of these bulbs, you can
also contact a
PEUGEOT dealer or a qualified
workshop.
Changing a fuse
Access to the tools
The extraction tweezers are fitted to the back
of the dashboard fusebox cover or glove box
fusebox cover.
Dashboard
8
In the event of a breakdown

134
F Unclip the cover by pulling at the top left, then right.
F

D
isengage the cover fully and turn it over.
F

R
emove the carrier on the back of which the
tweezers are fitted.
Glove box
F Open the glove box lid.
F U nclip the fusebox cover by pulling at top
right.
F

D
isengage the cover completely and turn it
ove r.
F

R
emove the carrier on the back of which the
tweezers are fitted. F

a
ll electrical consumers must be switched
of f,
F
i
dentify the failed fuse using the allocation
tables and the diagrams given in the
following pages.
To remove or fit a fuse, it is essential to:
F
u
se the special tweezers to extract the fuse
from its housing and check the condition of
its filament.
F
a
lways replace the failed fuse with a fuse
of the same rating (same colour); use of
a

different rating may cause malfunctions
(risk of fire).
If the fuse fails again soon after replacement,
have the vehicle's electrical system checked by
a PEUGEOT dealer or a qualified workshop.
Professional repairers: for full information
on the fuses and relays, consult the
"Methods" wiring information and diagrams
available from a


PEUGEOT dealer.
The fuse allocation tables and the
corresponding diagrams are available
from a PEUGEOT dealer or from
a


qualified workshop.
The replacement of a
fuse not shown in
the allocation tables below may cause
a


serious malfunction of your vehicle.
Contact a
PEUGEOT dealer or a qualified
workshop.
Installing electrical
accessories
Your vehicle's electrical system is
designed to operate with standard or
optional equipment.
Before installing other electrical
equipment or accessories on your vehicle,
contact a
PEUGEOT dealer or a qualified
workshop.
Good
Failed
Tw e e z e r s
Before changing a


fuse:
F

i

mmobilise the vehicle and switch off the
ignition,
In the event of a breakdown