2018 MERCEDES-BENZ CLA Owners Manual

Problems with the seat heating Problem
Possible causes/consequences and P Solutions
The seat heating has
switched off prematurely
or cannot be switched
on. The on-board voltage is too low because too many electrical consum-
ers are switched on. X
Switch off electrical consumers that you do not need, such as the
rear window defroster or interior lighting.
Once the battery is sufficiently charged, the seat heating will switch
back on automatically.
Steering wheel
Important safety notes
G WARNING
You could lose control of your vehicle if you do
the following while driving: R
adjust the driver's seat, head restraint,
steering wheel or mirrors R
fasten the seat belt
There is ar isk of an accident.
Adjust the driver's seat, head restraint ,s teer-
ing wheel and mirror and fasten your seat belt
before startin gt he engine.
G WARNING
Children could injure themselves if they
adjust the steering wheel. There is ar isk of
injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
Adjusting the steering wheel
G WARNING
If the steering wheel is unlocked while the
vehicle is in motion, it could change position
unexpectedly. This could cause you to lose
control of the vehicle. There is ar isk of an
accident.
Before startin go ff, make sure the steering
wheel is locked. Never unlock the steering
wheel while the vehicle is in motion. C
Release lever D
Adjust st he steering wheel height

Mirrors
Rear-view mirror X
Anti-glare mode: flick anti-glare lever C for-
wards or back.
Exterior mirrors
Adjusting the exterior mirrors
G WARNING
You coul dl ose control of you rv ehicl eify ou do
the following while driving: R
adjust the driver's seat, hea dr estraint,
steering whee lorm irrorsR
fasten the seat belt
There is ar isk of an accident.
Adjust the driver's seat, hea dr estraint, steer-
ing whee la nd mirror and fasten you rs eat belt
before starting the engine.
G WARNING
The exterior mirror on the front-passenger
side reduces the size of the image. Visible
objects are actually closer than they appear.
This means that you coul dm isjudge the dis-
tance from road users traveling behind, e.g.
when changing lane .T here is ar isk of an acci-
dent.
For this reason, alway sm ake sure of the
actua ld istance from the road users traveling
behind by glancing over you rs houlder. X
Turn the SmartKey to position G or H in the
ignitio nl ock ( Y
pag e1 22).X
Exterior mirror on the front-passenger side:
press button D .
Exterior mirror on the driver's side :p ress but-
ton C .
The indicator lamp in the corresponding but-
ton lights up in red.
The indicator lamp goes out again after some
time. You can adjust the selected exterior
mirror using button

Folding th ee xterior mirrors in or out
electrically X
Turn th eS ma rtKey to position G or H in th e
ignition loc k( Y
page 122).X
Briefly press C .
Both exterio rm irror sf ol dinoro ut .
i Mak es ure that th ee xter io rm irror sa re
always folded out fully while driving .T hey
could otherwise vibrate .
i If you are driving faste rt ha n30m ph
(47 km/h), you can no longer fol dint he exte -
rio rm irrors.
Resetting th ee xterior mirrorsIf th eb attery has been disconnected or com-
pletely discharged, th ee xter io rm irror sm ust be
reset .T he exterio rm irror sw ill otherwise no t
fol dinw hen you select th e" Fold in mirror sw hen
locking" function in th eo n-bo ard computer
( Y
page 188). X
Turn th eS ma rtKey to position G in th ei gni-
tion loc k( Y
page 122).X
Briefly press C .
Folding th ee xterior mirrors in or out
automatically If th e" Fold in mirror sw hen locking" function is
activated in th eo n-bo ard computer
( Y
page 188): R
th ee xter io rm irror sf ol dina utomatically as
soo nasy ou loc kt he vehicl ef ro mt he outside .R
th ee xter io rm irror sf ol do ut again automati-
call yass oo nasy ou unlock th ev ehicl ea nd
then open th ed river' sorf ront-pa ssenger
door . i If th ee xter io rm irror sh ave been folded in
manually, they do no tf ol do ut .
Exterior mirror pushed out of position If an exterio rm irror has been pushed out of
position ,p rocee dasf ollows :X
Vehicles without electricall yf olding exte-
rior mirrors : mov et he exterio rm irror int o
th ec orre ct position manually. X
Vehicles with electricall yf olding exterior
mirrors : press and hold mirror-foldin gb utto n
( Y
page 97 )u ntil yo uh ea rt he mirror click into
place.
The mirror housing is engaged agai na nd you
can adjus tt he exterio rm irrors as usual
( Y
page 96).
Automati ca nti-glare mirrors
G WARNING
Electrolyte ma ye scape if the glas sinana ut o-
matic anti-glare mirror breaks .T he electrolyte
is harmfu la nd causes irritation. It must not
come into contact with your skin, eyes, res-
piratory organs or clothing or be swallowed.
There is ar is kofi njury.
If yo uc ome into contact with the electrolyte,
observe the following: R
Rinse off the electrolyte from your skin
immediatel yw it hw at er.R
Immediately rins et he electrolyte ou to f
your eyes thoroughl yw it hc lean water.R
If the electrolyte is swallowed, immediately
rins ey ou rm outh ou tt horoughly. Do not
induce vomiting. R
If electrolyte come si nto contact with your
ski norh ai roriss wallowed, see km edical
attentio ni mmediately. R
Immediately change ou tofc lothing which
ha sc ome into contact with electrolyte. R
If an allergi cr eactio no ccurs, see km edical
attentio ni mmediately.
The "Automatic anti-glare mirrors "f unctio ni s
onl ya vailable if the vehicl eise quippe dw it ht he
"Mirrors package". Mirrors 97
Seats, steering wheel an dm irrors Z

The rear-view mirror and the exterior mirror on
the driver's side automatically go into anti-glare
mode if: R
the ignition is switched on and R
incident light from headlamps strikes the sen-
sor in the rear-view mirror
The mirrors do not go into anti-glare mode if
reverse gear is engaged or if the interior lighting
is switched on.
Parking position for the exterior mir-
ror on the front-passenger side
Setting and storing the parking position You can set the front-passenger side exterior
mirror such that you can see the rear wheel on
that side as soon as you engage reverse gear.
You can store this position.
C
Button for the driver's side exterior mirrorD
Button for the front-passenger side exterior
mirror

When leaving the vehicle, alway st ake the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
The memory function can be used at any time,
e.g. even when the SmartKey is not in the igni-
tion lock.
Storing settings With the memory function, you can store up to
three differen ts ettings, e.g. for three different
people.
The following settings are stored as as ingle
memory preset: R
seat and backres tp ositionR
driver's side: position of the exterior mirrors
on the driver's and front-passenger sides
X
Adjust the seat ( Y
page 92).X
Adjust the exterior mirror on the driver's side
( Y
page 96). X
Briefly press the M memory button and then
press preset position button 1 , 2 or 3 within
three seconds.
The settings are stored in the selected preset
position. At on es ounds when the settings
have been completed.
Calling up as tored settingX
Press and hold the relevant preset position
button 1 , 2 or 3 until the seat and exterior
mirrors are in the stored position.
i The setting procedure is interrupted as soon
as you release the storage position button. Memor yf unction 99
Seats, steering wheel and mirrors Z

Exterio rl ighting
General notes For reason sofs afety, Mercedes-Ben zr ecom-
mends that you driv ew ith th el ight ss witched on
even durin gt he daytime. In som ec ountries,
operatio noft he headlamps varies due to legal
requirement sa nd self-impose do bligations.
Settin gt he exterio rl ighting
Settin go ptionsExterior lighting can be set usin gt he :R
light switch R
combinatio ns witch ( Y
page 101)R
on-board compute r( Y
page 187)
Light switch
Operation
G c
Left-han ds ta nding lampsH d
Right-hand standing lampsI `
Parking lamps ,l icens ep lat ea nd
instrumen tc luste rl ightingJ X
Automatic headlam pm ode, controlled
by th el ight sensor
K X
Low-beam/high-beam headlamps

take precedence ove rt he daytime running
lamps.
US Ao nly:
The daytime running lamps improve the visibility
of your vehicl ed ur in gt he day. To do this, the
daytime running lamps functio nm us tb e
switched on using the on-board computer
( Y
page 187).
If the engine is running and yo ut ur nt he light
switch to the ` or X position, the manual
setting st ake precedence ove rt he daytime run-
ning lamps.
Low-beam headlamps Even if the light senso rd oe sn ot detect tha titi s
dark, the parking lamps and low-bea mh ead-
lamps switch on when the ignition is switched on
and the light switch is se ttot he X position.
Thi sisa particularly usefu lf un ctio nint he event
of rain and fog. X
To switc ho nt he low-beam headlamps:
tur nt he SmartKe ytop osit ion H in the igni-
tio nl oc kors tart the engine.X
Turn the light switch to X .
The green X indicator lamp in the instru-
ment cluste rl ig hts up.
Rea rf og lampThe rea rf og lamp improves visibility of your
vehicl ef or the traffi cb ehin dint he event of thick
fog .P leas et ake note of the country-specific
regulations for the us eofr ea rf og lamps.X
To switc ho nt he rear fo gl amp: tur nt he
SmartKe yint he ignition lock to position H or
s tart
the engine.X
Turn the light switch to X or X .X
Press the ^ button.
The yellow ^ indicator lamp in the instru-
ment cluste rl ig hts up.X
To switc ho ff the rear fo gl amp: press the
^ button.
The yellow ^ indicator lamp in the instru-
ment cluste rg oe so ut .
i When the rea rf og lamp is switched on, the
cente rb rake lamp in the tai ll am ps wi tches off
du etoal egal requirement.
Parkin gl amps
! If the battery charge is ver yl ow ,t he parking
lamps or standing lamps ar ea ut omatically
switched off to enabl et he next engine start.
Alway sp ar ky ou rv ehicl es af el ya nd in aw el ll it area ,ina ccordance with the relevant legal
stipulations. Avoi du si ng the ` parking
lamps ove rap er io dofs ev eral hours. If pos-
sible, switch on the right-hand d or left-
hand c standing lamps. X
To switc ho n: tur nt he light switch to ` .
Th eg reen ` indicator lamp in the instru-
ment cluste rl ig hts up.
Standin gl ampsSwitching on the standing lamps ensures the
corresponding side of the vehicl eisi llumin ated.X
To switc ho nt he standin gl amps: the
SmartKe yisn ot in the ignition lock or it is in
position Z in the ignition lock. X
Turn the light switch to c (left-hand side of
the vehi cle) or d (
right-hand side of the
vehicle).
Combination switch
X
To indicate briefly: press the combination
switch briefl ytot he pressure point in the
directio nofa rr ow D or

X
To switc ho ff the high-beam headlamps:
move the combinatio ns wi tch back to its nor-
ma lp osition.
The blue W indicator lamp in the instru-
ment cluster goe so ut .
Vehicles with Adaptive Highbeam Assist:
when Adaptive Highbeam Assist is active, it
controls activation and deactivation of the
high-bea mh eadlamps ( Y
page 102).X
To switc hont he high-beam flasher: pull
the combinatio ns wi tch in the direction of
arrow