2018 Lexus LC500 alarm

121
3
-$@-$I@0.@0.&@ &&

3-2. Opening, closing and locking the doors and trunk
Before driving
■Wireless remote control
Press and hold the switch.
■Trunk light
●The trunk light turns on when the trunk is opened.
●If the trunk light is le ft on when the engine switch is turned off, the
light will go off automatically after 20 minutes.
■Function to prevent the trunk being locked with the electronic key inside
●When both side doors are locked, closing the trunk lid with the electronic key left
inside the trunk will sound an alarm. In this case, the trunk lid can be opened by pressing the trunk release button on
the trunk lid.
●If the spare electronic key is put in the
trunk with both side doors locked, the key confinement prevention function is acti-vated so the trunk can be opened. In
order to prevent theft, take all electronic keys with you when leaving the vehicle.
●If the electronic key is put in the trunk with both side doors locked, the key may not
be detected depending on the location of the key and the surrounding radio wave conditions. In this case, the key confine-
ment prevention function cannot be acti- vated, causing the trunk to be locked when the trunk lid is closed. Make sure to
check where the key is before closing the trunk.
●The key confinement prevention function cannot be activated if either door is unlocked. In this case, open the trunk
using the trunk opener switch.
●If the trunk lid is closed by a hand having
the electronic key when the both side doors are locked, a warning buzzer may sound. In this case, the trunk is not locked.
Do not close the trunk lid by a hand hav- ing the electronic key.
■If the smart entry & start system or the wireless remote control does not oper-
ate properly
Use the trunk opener switch to unlock the
trunk. ( P.389) Replace the key battery with a new one if it is depleted. ( P.349)
■If a symbol indicating the trunk opens is
shown on the multi-information display
 P.118
■If the 12-volt battery is discharged
The trunk cannot be locked and unlocked
using the smart entry & start system or wireless remote control. Lock or unlock the trunk using the mechanical key. ( P.392)
■Customization
The trunk unlocking operation can be changed. (Customizable features:
 P.423)
Using the trunk grip, lower the trunk
without applying force to the side and
push the trunk down from the outside
to close it.
Closing the trunk

123
3
-$@-$I@0.@0.&@ &&

3-2. Opening, closing and locking the doors and trunk
Before driving
■Effective range (areas within which the electronic key is detected)
When locking or unlocking the doors
The system can be operated when the
electronic key is within about 0.7 m (2.3
ft.) of an outside door handle. (Only the
doors detecting the key can be oper-
ated.)
When opening the trunk
The system can be operated when the
electronic key is within about 0.7 m (2.3
ft.) of the trunk release button.
When starting the engine tem> or changing engine switch switch> modes
The system can be operated when the
electronic key is inside the vehicle.
■If an alarm sounds or a warning message is displayed
An alarm sounds and warning messages are displayed on the multi-information dis-play to protect against unexpected acci-
dents or theft of the vehicle resulting from erroneous operation. When a warning mes-sage is displayed, take appropriate mea-
sures based on the displayed message. ( P.378)
When only an alarm sounds, circumstances and correction procedures are as follows.
●When an exterior alarm sounds once for 5 seconds
●When an interior alarm sounds continu-ously
■If “Key Detected in Vehicle” is shown on the multi-information display
An attempt was made to lock the doors using the smart entry & start system while the electronic key was still inside the vehi-
cle. Retrieve the electronic key from the vehicle and lock the doors again.
A
B
C
SituationCorrection proce-
dure
The trunk was
closed while the
electronic key was
still inside the trunk
and both side doors
were locked.
Retrieve the elec-
tronic key from the
trunk and close the
trunk lid.
An attempt was
made to lock the
vehicle while a door
was open.
Close both side
doors and lock the
doors again.
SituationCorrection proce-
dure
The engine switch
was
turned to ACCES-
SORY mode while
the driver’s door was
open (or the driver’s
door was opened
while the engine
switch switch> was in
ACCESSORY
mode).
Turn the engine
switch switch> off and close
the driver’s door.
The engine switch
was
turned off while the
driver’s door was
open.
Close the driver’s
door.

125
3
-$@-$I@0.@0.&@ &&

3-2. Opening, closing and locking the doors and trunk
Before driving
• The electronic key is near the ground or in a high place, or too close to the center of the rear bumper when the trunk is
opened. • The electronic key is on the instrument panel, rear package tray or floor, or in the
door pockets or glove box when the engine is started or engine switch modes are
changed.
●Do not leave the electronic key on top of
the instrument panel or near the door pockets when exiting the vehicle. Depending on the radio wave reception
conditions, it may be detected by the antenna outside the cabin and the doors will become lockable from the outside,
possibly trapping the electronic key inside the vehicle.
●As long as the electronic key is within the effective range, the doors may be locked or unlocked by anyone. However, only
the doors detecting the electronic key can be used to unlock the vehicle.
●Even if the electronic key is not inside the vehicle, it may be possible to start the engine if the electronic
key is near the window.
●The doors may unlock or lock if a large amount of water splashes on the door handle, such as in the rain or in a car
wash, when the electronic key is within the effective range. (The doors will auto- matically be locked after approximately
30 seconds if the doors are not opened and closed.)
●If the wireless remote control is used to lock the doors when the electronic key is near the vehicle, there is a possibility that
the door may not be unlocked by the entry function. (Use the wireless remote control to unlock the doors.)
●If the door handle becomes wet while the electronic key is within the effective
range, the door may lock and unlock repeatedly. In this case, follow the follow-ing correction procedures to wash the
vehicle: • Place the electronic key in a location 2 m (6 ft.) or more away from the vehicle.
(Take care to ensure that the key is not stolen.)• Set the electronic key to battery-saving
mode to disable the smart entry & start system. ( P.124)
●If the electronic key is inside the vehicle and a door handle becomes wet during a car wash, a message may be shown on
the multi-information display and a buzzer will sound outside the vehicle. To turn off the alarm, lock both side doors.
●If an outside door handle is not retracted during a car wash, a door may be opened
or an outside door handle may be dam- aged. Make sure that the outside door handles are retracted before using the
car wash.
●A sudden handle operation or a handle
operation immediately after entering the effective range may prevent the doors from being unlocked. Touch the door
unlock sensor and check that the doors are unlocked before pulling the door handle again.
●Unlocking the vehicle may take more time if another electronic key is within the
effective range.
■When the vehicle is not driven for extended periods
●To prevent theft of the vehicle, do not leave the electronic key within 2 m (6 ft.)
of the vehicle.
●The smart entry & start system can be
deactivated in advance.
■To operate the system properly
●Make sure to carry the electronic key
when operating the system. Do not get the electronic key too close to the vehicle when operating the system from the out-
side of the vehicle. Depending on the position and holding condition of the electronic key, the key
may not be detected correctly and the system may not operate properly. (The alarm may go off accidentally, or the door
lock prevention function may not oper- ate.)
●Do not leave the electronic key inside the

391
7
-$@-$I@0.@0.&@ &&

7-2. Steps to take in an emergency
When trouble arises
ACCESSORY mode.
3Firmly depress the brake pedal and
check that is shown on the
multi-information display.
4 Press the engine switch switch>.
In the event that the engine tem> still cannot be started, contact
any authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer.
■Stopping the engine
Set the parking brake, shift the shift position to P and press the engine switch as you normally do when stopping
the engine .
■Electronic key battery
As the above procedure is a temporary
measure, it is recommended that the elec- tronic key battery be replaced immediately when the battery is depleted. ( P.349)
■Alarm (if equipped)
Using the mechanical key to lock the doors will not set the alarm system.
If a door is unlocked using the mechanical key when the alarm system is set, the alarm may be triggered.
■Changing engine switch
modes
Release the brake pedal and press the
engine switch in step 3
above. The engine does not start and modes will be changed each time the
switch is pressed. ( P.165, 170)

393
7
-$@-$I@0.@0.&@ &&

7-2. Steps to take in an emergency
When trouble arises
The glove box can be opened by per-
forming the following operations after
unlocking the doors.
If the glove box is locked, unlock it with the
mechanical key. ( P.293)
1Remove the cover using a flathead
screwdriver.
To prevent damage to the cover, cover the tip of the screwdriver with a rag.
2 Push the flathead screwdriver into
the part shown in the illustration to
open the glove box.
■After opening the glove box
The glove box can be opened normally by closing the glove box after restarting the
engine .
If you have a set of jumper (or booster)
cables and a second vehicle with a 12-
volt battery, you can jump start your
vehicle using the following procedure.
1 Confirm that the electronic key is
being carried.
When connecting the jumper (or booster) cables, depending on the situation, the
alarm may activate and doors locked. ( P.77)
NOTICE
■When installing the cover in the cen- ter of the rear seat
Make sure that the seat belts are not caught in the cover. Failure to do so may cause damage to the cover installation
clip and make it impossible to install the cover.
Opening the glove box
Restarting the engine system>

433
8
-$@-$I@0.@0.&@ &&

8-2. Customization
Vehicle specifications
■Alarm* (P.76)
*: If equipped
■Rain-sensing windshield wipers (P.196)
Operation when the doors are
unlockedOnOff——O
Operation when you approach the
vehicle with the electronic key on
your person
OnOff——O
Footwell lightingOnOff——O
Door trim ornament lightsOnOff——O
Time elapsed before the outside
door handle lights turn off15 seconds
Off
O—O7.5 seconds
30 seconds
Operation of the outside door han-
dle lights when the doors are
unlocked with the power door lock
switch
OnOff——O
Operation of the outside door han-
dle lights when a door is openedOnOff——O
Fading out of the outside door han-
dle lights when they turn offLongShort——O
FunctionDefault settingCustomized setting
Cancellation when the mechanical
key is used to unlockOffOn——O
FunctionDefault settingCustomized setting
Wiper operation when the wiper
switch is in the “AUTO” position
Rain-sensing
operation
Intermittent opera-
tion linked to vehicle
speed (with interval
adjuster)
——O
FunctionDefault settingCustomized settingABC
ABC
ABC

439
-$@-$I@0.@0.&@ &&

What to do if... (Troubleshooting)
depleted?
In this case, the engine can
be started in a temporary way. ( P.390)
Is the 12-volt battery discharged?
( P.392)
 It is locked automatically to prevent
theft of the vehicle. ( P.164, 168)
 Is the window lock switch pressed?
The power window at the passenger’s seat
cannot be operated if the window lock
switch is pressed. ( P.152)
The auto power off function will be
operated if the vehicle is left in
ACCESSORY or IGNITION ON
mode (the engine is
not running operating>) for a period of time.
( P.166, 170)
 The seat belt reminder light is flash-
ing
Are the driver and the passengers wearing
the seat belts? ( P.373)
The parking brake indicator is on
Is the parking brake released? (P.187)
Depending on the situation, other
types of warning buzzer may also
sound. ( P.368, 378)
 Did anyone inside the vehicle open
a door or anything move inside the
vehicle during setting the alarm?
The sensor detects them and the alarm
sounds. ( P.76)
To stop the alarm, turn the engine
switch to IGNITION
ON mode or start the
engine .
 Is the message displayed on the
multi-information display?
Check the message on the multi-informa-
tion display. ( P.378)
When a warning light turns on or a
warning message is displayed, refer
to P.368, 378.
The steering wheel cannot be
turned after the engine system> is stopped
The windows do not open or
close by operating the power
window switches
The engine switch switch> is turned off automati-
cally
A warning buzzer sounds during
driving
An alarm is activated and the
horn sounds
A warning buzzer sounds when
leaving the vehicle
A warning light turns on or a
warning message is displayed

441
-$@-$I@0.@0.&@ &&

Alphabetical index
Alphabetical index
A
A/C................................................................... 280
Air conditioning filter................................ 347
Automatic air conditioning system .. 280
Pollen removal mode ..............................285
ABS (Anti-lock Brake System) ..............262
Function .......................................................... 262
Warning light ...............................................369
Active rear wing ...........................................259
Adaptive Variable Suspension System
(AVS) .............................................................262
Airbag manual on-off system .....................46
Airbags ................................................................35
Airbag manual on-off system ................. 46
Airbag operating conditions................... 37
Airbag precautions for your child ........ 40
Correct driving posture ............................ 29
Curtain shield airbag operating condi-
tions .................................................................. 37
Curtain shield airbag precautions........ 40
General airbag precautions ................... 40
Locations of airbags.................................... 35
Modification and disposal of airbags . 42
Side airbag operating conditions ......... 37
Side airbag precautions ............................ 40
Side and curtain shield airbags operating
conditions ...................................................... 37
Side and curtain shield airbags precau-
tions .................................................................. 40
SRS airbags ..................................................... 35
SRS warning light.......................................369
Air conditioning filter.................................. 347
Air conditioning system............................ 280
Air conditioning filter................................ 347
Automatic air conditioning system .. 280
Pollen removal mode ..............................285
Alarm ................................................................... 76
Alarm .................................................................. 76
Warning buzzer ........................................ 368
Anchor brackets..................................... 49, 60
Antennas (smart entry & start system). 122
Anti-lock Brake System (ABS) ..............262
Function .......................................................... 262
Warning light .............................................. 369
Approach warning ......................................235
Automatic headlight leveling system.... 192
Automatic High Beam ................................ 193
Automatic light control system .................191
Automatic transmission.............................. 173
M mode ........................................................... 178
Paddle shift switches ....................... 177, 178
Snow mode..................................................... 177
Auxiliary net ...................................................293
Average fuel economy .................................94
Average vehicle speed.................................94
AVS (Adaptive Variable Suspension Sys-
tem).................................................................262
B
Back-up lights
Replacing light bulbs ............................... 355
Battery (12-volt battery) ............................325
Battery checking ........................................325
If the 12-volt battery is discharged ....392
Preparing and checking before winter
..........................................................................269
Replacing ...................................................... 398
Warning light .............................................. 368
Battery (traction battery) .............................65
Blind Spot Monitor (BSM) ...................... 248
Blind Spot Monitor function .................254
Rear Crossing Traffic Alert function 256
Brake
Brake hold ...................................................... 189
Fluid.................................................................... 418
Parking brake................................................ 187
Regenerative braking .................................63
Warning light .................................. 368, 373
Warning message .....................................379
Brake assist .....................................................262