2018 KIA STONIC wheel

Shift to P (for smart key system
and automatic transaxle)
• This warning message illuminates ifyou try to turn off the engine with‐
out the shift lever in P (Park) position.
• At this time, the Engine Start/Stop Button turns to the ACC position (If
you press the Engine Start/Stop But‐
ton once more, it will turn to the ON position).
Low Key Battery (for smart key
system)
• This warning message illuminates if the battery of the smart key is dis‐
charged when the Engine Start/Stop Button changes to the OFF position.
Press START button while turning
wheel (for smart key system)
• This warning message illuminates if
the steering wheel does not unlock
normally when the Engine Start/Stop Button is pressed.
• It means that you should press the Engine Start/Stop Button while turn‐
ing the steering wheel right and left.
Steering wheel unlocked (for smart
key system)
• This warning message illuminates if the steering wheel does not lockwhen the Engine Start/Stop Button
changes to the OFF position.
Check Steering Wheel Lock System
(for smart key system)
• This warning message illuminates if the steering wheel does not lock nor‐
mally when the Engine Start/Stop Button changes to the OFF position.
Press brake pedal to start engine
(for smart key system and
automatic transaxle)
• This warning message illuminates if the Engine Start/Stop Button
changes to the ACC position twice by pressing the button repeatedly with‐
out depressing the brake pedal.
• It means that you should depress the brake pedal to start the engine.
Press clutch pedal to start engine
(for smart key system and manual
transaxle)
• This warning message illuminates if the Engine Start/Stop Button
changes to the ACC position twice by
pressing the button repeatedly with‐ out depressing the clutch pedal.
• It means that you should depress the clutch pedal to start the engine.
Key not in vehicle (for smart key
system)
• This warning message illuminates ifthe smart key is not in the vehicle
when you press the Engine Start/ Stop Button.
• It means that you should always have the smart key with you.
Key not detected (for smart key
system)
• This warning message illuminates if
the smart key is not detected when
you press the Engine Start/Stop But‐ ton.
Features of your vehicle
4-62

Fog lights are used to provide improved
visibility when visibility is poor due to fog, rain or snow, etc. The fog lights
will turn on when the fog light switch
(1) is turned on after the parklight is turned on.
To turn off the fog lights, turn the fog
light switch (1) to the O (Off) position.
CAUTION
When in operation, the fog lightsconsume large amounts of vehicleelectrical power. Only use the foglights when visibility is poor.
Rear fog light (if equipped)
¥
5ZQF
"
¥
5ZQF
#
To turn the rear fog lights on, turn the
rear fog light switch (1) to the on posi‐ tion when the headlight is turned on. Also, the rear fog lights turn on when
the rear fog light switch is turned on
after the front fog light switch (if equipped) is turned on and the head‐
light switch is in the parklight position.
To turn the rear fog lights off, turn the
rear fog light switch to the on position again.
NOTICE
Rear fog light is only on the driver’s
side (if equipped).
Static bending light (if equipped)
While driving the corner, for your sight
and safety, the static bending light is turned on automatically. The system
will operate automatically as follows. • When turning the headlight on
• When the angle of steering wheel is over 35~40 (it is differed from vehicle
speed)
• When the vehicle speed is over 3 km/h
• When driving forward or backward.
Features of your vehicle
4-86

Mode selection
The mode selection knob controls the
direction of the air flow through the ventilation system.
Air can be directed to the floor, dash‐
board outlets, or windshield. Five sym‐
bols are used to represent Face, Bi-Lev‐
el, Floor, Floor-Defrost and Defrost air position.
Face-Level (B, D)
Air flow is directed toward the upper
body and face. Additionally, each outlet can be controlled to direct the air dis‐
charged from the outlet.
Bi-Level (B, D, C, E)
Air flow is directed towards the face
and the floor.
Floor-Level (C, E, A, D)
Most of the air flow is directed to the
floor, with a small amount of the air being directed to the windshield and
side window defrosters.
Floor/Defrost-Level (A, C, D,E)
Most of the air flow is directed to the floor and the windshield with a small
amount directed to the side window
defrosters.
Defrost-Level (A, D)
Most of the air flow is directed to the
windshield with a small amount of air directed to the side window defrosters.
Instrument panel vents
0:#
The outlet vents can be opened or
closed separately using the thumb‐ wheel. To close the vent, rotate it
downward to the maximum position.
Also, you can adjust the direction of air
delivery from these vents using the vent control lever as shown.

4-101
4
Features of your vehicle

Floor & Defrost (A, C, D, E)
Most of the air flow is directed to the
floor and the windshield with a small amount directed to the side window
defrosters.
Face-Level (B, D)
Air flow is directed toward the upper
body and face. Additionally, each outlet can be controlled to direct the air dis‐
charged from the outlet.
Bi-Level (B, D, C, E)
Air flow is directed towards the face
and the floor.
Floor-Level (C, A, D, E)
Most of the air flow is directed to the
floor, with a small amount of the air being directed to the windshield and
side window defrosters.
Defrost mode
When you select the defrost mode, the
following system settings will be made automatically: • The air conditioning system will be turned on.
• The outside (fresh) air position will be selected.
• The fan speed will be set to the high speed.
To turn the defrost mode off, press the mode button or defrost button again or
AUTO button.
Instrument panel vents
0:#
The outlet port can be opened or closed
separately using the horizontal thumb‐ wheel. To close the vent, rotate it
downward to the maximum position. To
open the vent, rotate it upward to the
desired position.
Also, you can adjust the direction of air
delivered from these vents using the
vent control lever as shown.

4-111
4
Features of your vehicle

(Continued)
under the influence of drugs is asdangerous or more dangerous thandriving drunk.You are much more likely to have aserious accident if you drink or takedrugs and drive.If you are drinking or taking drugs,don’t drive. Do not ride with a driverwho has been drinking or takingdrugs. Choose a designated driver orcall a cab.
WARNING
•When you intend to park or stopthe vehicle with the engine on, becareful not to depress the acceler‐ator pedal for a long period oftime. It may overheat the engineor exhaust system and cause fire.
(Continued)
(Continued)
•When you make a sudden stop orturn the steering wheel rapidly,loose objects may drop on thefloor and it could interfere withthe operation of the foot pedals,possibly causing an accident. Keepall things in the vehicle safely stor‐ed.
•If you do not focus on driving, itmay cause an accident. Be carefulwhen operating what may disturbdriving such as audio or heater. Itis the responsibility of the driverto always drive safely.

6-05
6
Driving your vehicle

KEY POSITIONS
Ignition switch position
LOCK
0:##
5ZQF
"
-0$, "$$
0/
45"35
¥
5ZQF
#
The steering wheel locks to protect
against theft. The ignition key can be removed only in the LOCK position.
ACC (Accessory)
The steering wheel is unlocked and
electrical accessories are operative.
NOTICE
If difficulty is experienced turning
the ignition switch to the ACC posi‐
tion, turn the key while turning the
steering wheel right and left to re‐
lease the tension.
ON
The warning lights can be checked be‐
fore the engine is started. This is the normal running position after the en‐
gine is started.
Do not leave the ignition switch ON if
the engine is not running to prevent battery discharge.
START
Turn the ignition switch to the START
position to start the engine. The engine will crank until you release the key;
then it returns to the ON position. The
brake warning light can be checked in this position.
WARNING
nIgnition switch
•Never turn the ignition switch toLOCK or ACC while the vehicle ismoving. This would result in loss ofdirectional control and brakingfunction, which could cause an ac‐cident.
(Continued)
Driving your vehicle
6-06

(Continued)
•The anti-theft steering columnlock is not a substitute for theparking brake. Before leaving thedriver’s seat, always make surethe shift lever is engaged in 1stgear for the manual transaxle or P(Park) for the automatic transaxle,set the parking brake fully andshut the engine off. Unexpectedand sudden vehicle movementmay occur if these precautions arenot taken.
•Never reach for the ignitionswitch, or any other controlsthrough the steering wheel whilethe vehicle is in motion. The pres‐ence of your hand or arm in thisarea could cause a loss of vehiclecontrol, an accident and seriousbodily injury or death.
•Do not place any movable objectsaround the driver’s seat as theymay move while driving, interferewith the driver and lead to an acci‐dent.
Starting the engine
WARNING
•Always wear appropriate shoeswhen operating your vehicle. Un‐suitable shoes (high heels, skiboots,etc.) may interfere withyour ability to use the brake andaccelerator pedal, and the clutch(if equipped).
•Do not start the vehicle with theaccelerator pedal depressed. Thevehicle can move and lead to anaccident.
•Wait until the engine rpm is nor‐mal. The vehicle may suddenlymove if the brake pedal is releasedwhen the rpm is high.
NOTICE
nKick down mechanism (if
equipped)
If your vehicle is equipped with a kick
down mechanism in the accelerator
(Continued)
(Continued)
pedal, it prevents you from driving
at full throttle unintentionally by
making the driver require increased
effort to depress the accelerator
pedal. However, if you depress the
pedal more than approximately 80%,
the vehicle can be at full throttle and
the accelerator pedal will be easier
to depress. This is not a malfunction
but a normal condition.
Starting the gasoline engine
1. Make sure the parking brake is ap‐plied.
2.
Manual Transaxle - Depress the
clutch pedal fully and shift the
transaxle into Neutral. Keep the
clutch pedal and brake pedal de‐
pressed while turning the ignition
switch to the start position.
Automatic Transaxle - Place the
transaxle shift lever in P (Park). De‐ press the brake pedal fully.
You can also start the engine when
the shift lever is in the N (Neutral)position.

6-07
6
Driving your vehicle

ENGINE START/STOP BUTTON (IF EQUIPPED)
Illuminated ENGINE START/STOP
button
Whenever the front door is opened, the
ENGINE START/STOP button will illumi‐ nate for your convenience. The light will
go off after about 30 seconds when the
door is closed. It will also go off imme‐
diately when the theft-alarm system is
armed.
ENGINE START/STOP button
position
OFF
With manual transaxle
To turn off the engine (START/RUN position) or ve‐
hicle power (ON position), stop the vehicle then press the ENGINE START/STOP button.
With automatic transaxle
To turn off the engine (START/RUN po‐
sition) or vehicle power (ON position),
press the ENGINE START/STOP button with the shift lever in the P (Park) posi‐
tion. When you press the ENGINE
START/STOP button without the shift lever in the P (Park) position, the EN‐
GINE START/STOP button will not
change to the OFF position but to the ACC position.
Also, the steering wheel locks when the
ENGINE START/STOP button is in the
OFF position to protect you against theft. It locks when the door is opened.
Not illuminated
Vehicles equipped with anti-theftsteering column lock
The steering wheel locks when the en‐ gine start/stop button is in the OFF po‐
sition to protect you against theft. It
locks when the door is opened.
If the steering wheel is not locked prop‐ erly when you open the driver's door,
the warning chime will sound. If the
problem is not solved, have the system checked by a professional workshop.
Kia recommends to visit an authorized
Kia dealer/service partner.
In addition, if the ENGINE START/STOP button is in the OFF position after the
driver's door is opened, the steering
wheel will not lock and the warning chime will sound. In such a situation,
close the door. Then the steering wheel
will lock and the warning chime will stop.
NOTICE
If the steering wheel doesn't unlock
properly, the ENGINE START/STOP
button will not work. Press the EN‐
(Continued)
Driving your vehicle
6-10