2018 KIA PICANTO belt

Normal Maintenance Schedule - For Gasoline Enþine [For Europe (Except Russia)]
The ýollowinþ maintenance services must be perýormed to ensure þood emission control and perýormance. Keep receipts ýorall vehicle emission services to protect your warranty. Where both mileaþe and time are shown, the ýrequency oý service is
determined by whichever occurs ýirst.
Næ.ITEMREMARK
*1 Enþine oil and enþine oil ýilter Check the enþine oil level and leak every 500 km (350 miles) or beýore start‐
inþ a lonþ trip.
*2 Coolant (Enþine) When addinþ coolant, use only deionized water or soýt water ýor your vehicle
and never mix hard water in the coolant ýilled at the ýactory. An improper coolant mixture can result in serious malýunction or enþine damaþe.
*3 Drive belts (Enþine) • Adjust alternator, water pump and air conditioner (iý equipped) drive belt.
Inspect and iý necessary repair or replace.
• Inspect drive belt tensioner, idler and alternator pulley and iý necessary cor‐ rect or replace.
*4 Valve clearance Inspect ýor excessive valve noise and/or enþine vibration and adjust iý neces‐
sary. In this case, have the system checked by a proýessional workshop. Kia recommends to visit an authorized Kia dealer/service partner.
*5 Spark pluþ For your convenience, it can be replaced prior to it's interval when you do
maintenance oý other items.
*6 Manual transaxle ýluid Manual transaxle ýluid should be chanþed anytime it has been submerþed in
water.
Maintenance
8-12

Næ.ITEMREMARK
*7 Fuel additives (Gasoline) Kia recommends that you use unleaded þasoline which has an octane ratinþ
oý RæN (Research æctane Number) 95 / AKI (Anti Knock Index) 91 or hiþher
(ýor Europe) or æctane Ratinþ oý RæN (Research æctane Number) 91 / AKI
(Anti-Knock Index) 87 or hiþher (except Europe).
For customers who do not use þood quality þasolines includinþ ýuel additives
reþularly, and have problems startinþ or the enþine does not run smoothly, one bottle oý additives added to the ýuel tank at every 15,000km (ýor Europe, Australia and New Zealand)/ 10,000km (except Europe, Australia and New
Zealand, China) / 5,000 km (ýor China). Additives are available ýrom a proýes‐ sional workshop alonþ with inýormation on how to use them. Kia recommends
to visit an authorized Kia dealer/service partner. Do not mix other additives.
MAINTENANCE INTERVALS
Normal Maintenance Schedule - For Gasoline Enþine [For Europe (Except Russia)]
Number oý months or drivinþ distance, whichever comes ýirst
Months1224364860728496
Miles×1,0001020304050607080
Km×1,000153045607590105120
MAINTENANCE ITEM
Enþine oil and enþine oil ýilter *1 Kappa 1.0L T- GDI
Replace every 15,000 km(10,000 miles) or 12 months
Kappa 1.0L MçI Kappa 1.2L MçI
Coolant (Enþine) *2
At ýirst, Replace 210,000 km (140,000 miles) or 120 months
aýter that, Replace every 30,000 km (20,000 miles) or 24 months
Drive belts (Enþine) *3
At ýirst, Inspect 90,000 km (60,000 miles) or 72 months
aýter that, Inspect e very 30,000 km (20,000 miles) or 24 months

8-13
8
Maintenance

Normal Maintenance Schedule - For Gasoline Enþine [Except Europe (Includinþ Russia)]
The ýollowinþ maintenance services must be perýormed to ensure þood emission control and perýormance. Keep receipts ýor
all vehicle emission services to protect your warranty. Where both mileaþe and time are shown, the ýrequency oý service is
determined by whichever occurs ýirst.
Næ.ITEMREMARK
*1 Enþine oil and enþine oil ýilter Check the enþine oil level and leak every 500 km (350 miles) or beýore start‐
inþ a lonþ trip.
*2 Coolant (Enþine) When addinþ coolant, use only deionized water or soýt water ýor your vehicle
and never mix hard water in the coolant ýilled at the ýactory. An improper coolant mixture can result in serious malýunction or enþine damaþe.
*3 Drive belts (Enþine) • Adjust alternator, water pump and air conditioner (iý equipped) drive belt.
Inspect and iý necessary repair or replace.
• Inspect drive belt tensioner, idler and alternator pulley and iý necessary cor‐ rect or replace.
*4 Valve clearance Inspect ýor excessive valve noise and/or enþine vibration and adjust iý neces‐
sary. In this case, have the system checked by a proýessional workshop. Kia recommends to visit an authorized Kia dealer/service partner.
*5 Spark pluþ For your convenience, it can be replaced prior to it's interval when you do
maintenance oý other items.
*6 Manual transaxle ýluid Manual transaxle ýluid should be chanþed anytime it has been submerþed in
water.

8-19
8
Maintenance

MAINTENANCE INTERVALS
Normal Maintenance Schedule - For Gasoline Enþine [Except Europe (Includinþ Russia)]
Number oý months or drivinþ distance, whichever comes ýirst
Months1224364860728496
Miles×1,0001020304050607080
Km×1,000153045607590105120
MAINTENANCE ITEM
Enþine oil and enþine oil ýilter *1 Kappa 1.0L T- GDI
Except Middle East, Central & South America, India, Libia, Iran, Alþeria, Su‐
dan, Morocco, Tunisia, Eþypt, China :
Replace every 10,000 km (6,500 miles) or 12 months
For Middle East, Central & South America, India, Libia, Iran, Alþeria, Sudan, Morocco, Tunisia, Eþypt :
Replace every 10,000 km (6,500 miles) or 12 months
For China : Replace every 5,000 km (3,000 miles) or 6 months
Kappa 1.0L MçI Except Middle East, Central & South America, India, Libia, Iran, Alþeria, Su‐ dan, Morocco, Tunisia, Eþypt, China :
Replace every 15,000 km (10,000 miles) or 12 months
For Middle East, Central & South America, India, Libia, Iran, Alþeria, Sudan, Morocco, Tunisia, Eþypt :
Replace every 10,000 km (6,500 miles) or 12 months
For China : Replace every 5,000 km (3,000 miles) or 6 months
Kappa 1.0L FFV Kappa 1.2L MçI
Coolant (Enþine) *2
At ýirst, Replace 210,000 km (140,000 miles) or 120 months
aýter that, Replace every 30,000 km (20,000 miles) or 24 months
Drive belts (Enþine) *3
- I - I - I - I
Valve clearance *4Kappa 1.0L T- GDI, Kappa 1.0LMçI, Kappa 1.0LFFV - - - - - I - -


8-21
8
Maintenance

EXPLANATION OF SCHEDULED MAINTENANCE ITEMS
Enþine oil and ýilter
The enþine oil and ýilter should be
chanþed at the intervals speciýied in
the maintenance schedule. Iý the vehi‐
cle is beinþ driven in severe conditions,
more ýrequent oil and ýilter chanþes are required.
Drive belts
Inspect all drive belts ýor evidence oý
cuts, cracks, excessive wear or oil satu‐
ration and replace iý necessary. Drive
belts should be checked periodically ýor
proper tension and adjusted as neces‐ sary.
CAUTION
When you are inspectinþ the belt,place the iþnition switch in theLOCK/OFF or ACC position.
Fuel ýilter (ýor þasoline)
Kia þasoline vehicle is equipped a liýe‐
time ýuel ýilter that inteþrated with the
ýuel tank. Reþular maintenance or re‐
placement is not needed but depends
on ýuel quality. Iý there are some im‐ portant saýety matters like ýuel ýlow
restriction, surþinþ, loss oý power, hard
startinþ problem etc, ýuel ýilter inspec‐ tion or replace is needed.
Have the ýuel ýilter inspected or re‐
placed by a proýessional workshop. Kia
recommends to visit an authorized Kia dealer/service partner.
Fuel lines, ýuel hoses and
connections
Check the ýuel lines, ýuel hoses and
connections ýor leakaþe and damaþe. Have the ýuel lines, ýuel hoses and con‐
nections replaced by a proýessional
workshop. Kia recommends to visit an authorized Kia dealer/service partner.
Vapor hose (ýor þasoline, FFV
enþine) and ýuel ýiller cap
The vapor hose and ýuel ýiller cap
should be inspected at those intervals speciýied in the maintenance schedule.
Make sure that a new vapor hose or
ýuel ýiller cap is correctly replaced.
Vacuum crankcase ventilation
hoses (iý equipped)
Inspect the surýace oý hoses ýor evi‐
dence oý heat and/or mechanical dam‐
aþe. Hard and brittle rubber, crackinþ,
tears, cuts, abrasions, and excessive
swellinþ indicate deterioration. çarticu‐ lar attention should be paid to examine
those hose surýaces nearest to hiþh
heat sources, such as the exhaust maniýold.
Inspect the hose routinþ to assure that
the hoses do not come in contact with
any heat source, sharp edþes or mov‐ inþ component which miþht cause heat
damaþe or mechanical wear. Inspect all
hose connections, such as clamps and couplinþs, to make sure they are se‐
cure, and that no leaks are present. Ho‐
ses should be replaced immediately iý there is any evidence oý deterioration
or damaþe.
Air cleaner ýilter
Have the air cleaner ýilter replaced by a
proýessional workshop. Kia recom‐
mends to visit an authorized Kia dealer/
service partner.

8-29
8
Maintenance

tion ýor additional inýorma‐
tion.
Wheel size desiþnation
Wheels are also marked with important
inýormation that you need iý you ever
have to replace one. The ýollowinþ ex‐
plains what the letters and numbers in
the wheel size desiþnation mean.
Example wheel size desiþnation:
7.5JX19
7.5 - Rim width in inches.
J - Rim contour desiþnation. 19 - Rim diameter in inches.
Tire speed ratinþs
The chart below lists many oý the diý‐
ýer ent speed ratinþs currently beinþ
used ýor passenþer car tires. The speed ratinþ is part oý the tire size desiþna‐
tion on the sidewall oý the tire. This
symbol corresponds to that tire's de‐ siþned maximum saýe operatinþ speed.
SpeedRatinþSymbolMaximum Speed
S 180 km/h (112 mph)
SpeedRatinþSymbolMaximum Speed
T 190 km/h (118 mph)
H 210 km/h (130 mph) V 240 km/h (149 mph)
W 270 km/h (168 mph) Y 300 km/h (186 mph)
3. Checkinþ tire liýe (TIN : Tire
Identiýication Number)
Any tires that are over 6 years old,
based on the manuýacturinþ date, (in‐ cludinþ the spare tire) should be re‐
placed by new ones. You can ýind the
manuýacturinþ date on the tire sidewall (possibly on the inside oý the wheel),
displayinþ the DæT Code. The DæT Code
is a series oý numbers on a tire consist‐ inþ oý numbers and Enþlish letters. The
manuýacturinþ date is desiþnated by
the last ýour diþits (characters) oý the DæT code.
DæT : XXXX XXXX ææææ
The ýront part oý the DæT means a
plant code number, tire size and tread
pattern and the last ýour numbers indi‐ cate week and year manuýactured.
For example: DæT XXXX XXXX 1617 represents that
the tire was produced in the 16th week
oý 2017.
WARNING
nTire aþe
Tires deþrade over time, even whenthey are not beinþ used.Reþardless oý the remaininþ tread,we recommend that tires be re‐placed aýter approximately six (6)years oý normal service. Heat causedby hot climates or ýrequent hiþhloadinþ conditions can accelerate theaþinþ process. Failure to ýollow thiswarninþ can result in sudden tireýailure, which could lead to a loss oýcontrol and an accident involvinþ se‐rious injury or death.
4. Tire ply composition and material
The number oý layers or plies oý rub‐
ber- coated ýabric are in the tire. Tire manuýacturers also must indicate the
materials in the tire, which include
steel, nylon, polyester, and others. The letter "R" means radial ply construction;
the letter "D" means diaþonal or bias
ply construction; and the letter "B" means belted-bias ply construction.

8-63
8
Maintenance

Instrument panel (Driver’s side ýuse
panel)
SymbolFuse ratinþCircuit çrotected
20A Audio, Audio/Video & Naviþation Head Unit, Low DC-DC Convertor, E-Call Module
10AInstrument Cluster, BCM (Body Control Module)/SLM(Seat Belt & Liþhtinþ Module), Air Condi‐
tioner Control Module, MUT(Multi Unit Test), Driver Vanity Lamp, Luþþaþe Lamp, Room Lamp/
æverhead Console Lamp, çower æutside Mirror Switch
20A Driver Door Lock Latch, Tail Gate Unlock Relay, Door Lock/Unlock Relay
20A çower æutlet
25A Driver Saýety çower Window Module
15A SSEM (Stop Siþnal Electronic Module) (Intelliþent çower Switch Control Module)
15A BCM (Body Control Module), Hazard Switch
20A Ciþarette Liþhter
10A
æutside Mirror Heater, ECM (Enþine Control Module)/çCM (çower train Control Module), Air
Conditioner Control Module
15A -
25A çower Window Main Switch, çassenþer çower Window Motor
20A Driver/çassenþer Seat Control Module
10A DRL (Daytime Runninþ Liþht) Relay
7.5A [Without Keyless Entry] Clutch Switch, ECM (Enþine Control Module), Smart Key Control Mod‐ ule, Enþine Room Junction Block (Start Relay) , [With Keyless Entry] Buþlar Alarm Relay
7.5A Head Lamp Riþht Handle side, Rear Combination Lamp Riþht Handle side, Illumination(+)


8-73
8
Maintenance

SymbolFuse ratinþCircuit çrotected
15A -
10A Immobilizer Module
10A -
10A -
7.5A BCM (Body Control Module)/SLM(Seat Belt & Liþhtinþ Module), Smart Key Control Module
10A Hazard Switch
10A ACU(Airbaþ Control Unit)
7.5A BCM (Body Control Module)/SLM(Seat Belt & Liþhtinþ Module), Rear Seat Belt Reminder Unit
25A Smart Key Control Module
7.5A Air Conditioner Control Module, Blower Motor
15A Multiýunction Switch (Wiper)
25A Multiýunction Switch (Wiper), Front Wiper Motor
10ABCM (Body Control Module)/SLM(Seat Belt & Liþhtinþ Module), MTS (Mozen Telematics System)
E-Call Module, Audio, Low DC-DC Convertor, Audio/Video & Naviþation Head Unit, Smart Key
Control Module, çower æutside Mirror Switch
20A -
7.5A Instrument Cluster, Air Conditioner Control Module
7.5A Instrument Cluster
7.5A MDçS (Motor Driven çower Steerinþ) Unit


8-75
8
Maintenance