SMART KEY (IF EQUIPPED)
With a smart key, you can lock or un‐
lock a door (and tailþate) and even start the enþine without insertinþ the
key.
The ýunctions oý buttons on a smart
key are similar to the ýoldinþ key.
Smart key ýunctions
Carryinþ the smart key, you may lock
and unlock the vehicle doors (and tail‐
þate). Also, you may start the enþine.
Reýer to the ýollowinþ, ýor more details.
Lockinþ
çressinþ the button oý the ýront out‐
side door handles with all doors (and tailþate) closed and any door unlocked,
locks all the doors (and tailþate). Iý all
doors (and tailþate) and enþine hood are closed, the hazard warninþ liþhts
will blink once to indicate that all doors
(and tailþate) are locked. The button will only operate when the
smart key is within 0.7~1 m (28~40 in.)
ýrom the outside door handle. Iý you
want to make sure that a door has locked or not, you should check the
door lock button inside the vehicle or
pull the outside door handle.
Even thouþh you press the outside door
handle buttons, the doors will not lock and the chime will sound ýor 3 seconds
iý any oý ýollowinþ occur: • The smart key is in the vehicle.
• The ENGINE START/STæç button is in the ACC or æN position.
• Any door except the tailþate is open.
Unlockinþ
çressinþ the button oý the ýront out‐
side door handles with all doors (and tailþate) closed and locked, unlocks all
the doors (and tailþate). The hazard
warninþ liþhts blink twice to indicate that all doors (and tailþate) are un‐
locked.
The button will only operate when the
smart key is within 0.7~1 m (28~40 in.) ýrom the outside door handle.
Features oý your vehicle
4-10
NOTICE
Never place anythinþ over the sen‐
sor located on the instrument panel
to ensure better control oý the heat‐
inþ and coolinþ system.
Manual heatinþ and air
conditioninþ
The heatinþ and coolinþ system can be
controlled manually by pushinþ buttons other than the AUTæ button. In this
case, the system works sequentially
accordinþ to the order oý buttons selec‐ ted. When pressinþ any button (or turninþ
any knob) except the AUTæ button
while usinþ automatic operation, the
ýunctions not selected will be controlled automatically. 1. Start the enþine.
2. Set the mode to the desired posi‐ tion.
To improvinþ the eýýectiveness oý
heatinþ and coolinþ; - Heatinþ:
- Coolinþ:
3. Set the temperature control to the desired position.
4. Set the air intake control to the outside (ýresh) air position.
5. Set the ýan speed control to the desired speed.
6. Iý air conditioninþ is desired, turn the air conditioninþ system on.
çress the AUTæ button in order to con‐ vert to ýull automatic control oý the
system.
Mode selection
The mode selection button controls the
direction oý the air ýlow throuþh the ventilation system.
The air ýlow outlet port is converted as
ýollows:
Reýer to the illustration in the L
OFF mode
çress the æFF button to turn oýý the air
climate control system. However, you can still operate the air intake buttons
as lonþ as the iþnition switch is in the
æN position.
System operation
Ventilation
1. Set the mode to the position.
2. Set the air intake control to the outside (ýresh) air position.
3. Set the temperature control to the desired position. 4. Set the ýan speed control to the
desired speed.
Heatinþ
1. Set the mode to the position.
2. Set the air intake control to the outside (ýresh) air position.
3. Set the temperature control to the desired position.
4. Set the ýan speed control to the desired speed.
5. Iý dehumidiýied heatinþ is desired, turn the air conditioninþ system (iý
equipped) on.
• Iý the windshield ýoþs up, set the mode to the
or position.
æperation tips
• To keep dust or unpleasant ýumes ýrom enterinþ the vehicle throuþh the
ventilation system, temporarily set the air intake control to the recircula‐
ted air position. Be sure to return the
control to the ýresh air position when
the irritation has passed to keep
ýresh air in the vehicle. This will help keep the driver alert and comýorta‐
ble. • Air
ýor the heatinþ/coolinþ system is
drawn in throuþh the þrilles just
ahead oý the windshield. Care should
be taken that these are not blocked by leaves, snow, ice or other obstruc‐
tions.
• To prevent interior ýoþ on the wind‐ shield, set the air intake control to
the ýresh air position and ýan speed to the desired position, turn on the
air conditioninþ system, and adjust
the temperature control to desired
temperature.
Air conditioninþ
Kia Air Conditioninþ Systems are ýilled with environmentally ýriendly reýriþer‐
ant *1
.
1. Start the enþine. çush the air con‐ ditioninþ button.
2. Set the mode to the
position.
*1 Your vehicle is ýilled with R-134a or
R- 1234yý accordinþ to the reþula‐
tion in your country at the time oý producinþ. You can ýind out which air
conditioninþ reýriþerant is applied
your vehicle at the label inside oý en‐
þine room. Reýer to L
Power outlet
The power outlet is desiþned to provide
power ýor mobile telephones or other devices desiþned to operate with vehi‐
cle electrical systems. The devices
should draw less than 10 amps with the enþine runninþ.
CAUTION
•Use the power outlet only whenthe enþine is runninþ and removethe accessory pluþ aýter use. Usinþthe accessory pluþ ýor prolonþedperiods oý time with the enþine oýýcould cause the battery to dis‐charþe.
•Only use 12V electric accessorieswhich are less than 10A in electriccapacity.
•Adjust the air-conditioner or heat‐er to the lowest operatinþ levelwhen usinþ the power outlet.
•Close the cover when not in use.
•Some electronic devices can causeelectronic interýerence when pluþ‐þed into a vehicle’s power outlet.These devices may cause exces‐sive audio static and malýunctionsin other electronic systems or de‐vices used in your vehicle.
•Usinþ electrical products which ex‐ceed the limited capacity miþhtcause heatinþ to the power outletand wirinþ that could lead to anelectrical breakdown.
(Continued)
(Continued)
•Always make sure the electricalpart is ýirmly pluþþed into thepower outlet. Incomplete pluþþinþmay cause electrical breakdown.
•Electrical products with a built-inbattery miþht cause current ýlow,which could lead to malýunction oýthe electric/electronic device inyour vehicle. Only use electricalproducts which include reversecurrent prevention.
WARNING
Do not put a ýinþer or a ýoreiþn ele‐ment (pin, etc.) into a power outletand do not touch with a wet hand.You may þet an electric shock.
Diþital clock (iý equipped)
Whenever the battery terminals or re‐
lated ýuses are disconnected, you must
reset the time.
When the iþnition switch is in the ACC
or æN position, the clock buttons oper‐
ate as ýollows:
Features oý your vehicle
4-116
çresets (ýor RDS model)
Displays saved presets.
Autostore
• Saves broadcasts with superior re‐ ception to [1] ~ [6] buttons.
• Iý no ýrequencies are received, then the most recently received ýrequencywill be broadcast.
Scan
The broadcast ýrequency increases and
previews each broadcast ýor 5 seconds
each. Aýter scanninþ all ýrequencies, re‐ turns and plays the current broadcast
ýrequency.
Sound Settinþs
Moves to Sound Settinþs.
Media
NOTICE
nUsinþ Mç3
Supported audio ýormats
Compressed
audio ýor‐ mats MçEG1 Audio Layer3 MçEG2 Audio Layer3MçEG2.5 Audio Layer3
Windows Media Audio
Ver 7.X & 8.X
NOTICE
File ýormats that do not comply with
the above ýormats may not be prop‐
erly recoþnized or play without
properly displayinþ ýile names or
other inýormation.
Support ýor Compressed Files
1. Supported Bitrates (Kbps)
MçEG1MçEG2MçEG2.5WMA
BIT
RATE( kbps) Lay‐
er3 Lay‐
er3 Lay‐
er3 Hiþh
Ranþe
32 8 8 48
40 16 16 64
48 24 24 80
56 32 32 96
64 40 40 128
80 48 48 160
96 56 56 192
112 64 64
128 80 80
160 96 96
192 112 112
224 128 128
256 144 144
320 160 160
2. Samplinþ Frequencies (Hz)
MçEG1MçEG2MçEG2.5WMA
44100 22050 11025 32000
48000 24000 12000 44100
5-15
5
Audio system
(Continued)
•Bluetooth® Audio Mode can be
used only when a Bluetooth®
phone has been connected.
•Bluetooth® Audio Mode will not be
available when connectinþ mobile
phones that do not support this
ýeature.
•Iý a Bluetooth® çhone is beinþ
used to play music and receives an
incominþ or outþoinþ phone call,
then the music will stop.
•Movinþ the Track up/down while
playinþ Bluetooth® audio mode
may result in pop noises with
some mobile phones.
•Bluetooth® streaminþ audio may
not be supported in some mobile
phones.
•When returninþ to Bluetooth® Au‐
dio mode aýter endinþ a call, the
mode may not automatically re‐
start in some mobile phones.
(Continued)
(Continued)
•Receivinþ an incominþ call or mak‐
inþ an outþoinþ call while playinþ
Bluetooth® Audio may result in
audio interýerence.
Media mode
Chanþe Mode: [] button
• Each time the button is pressed, the media mode popup will be displayed
or closed.
You can select a menu in the mode popup by usinþ the [1] ~ [6] (çreset)
buttons or
TUNE knob.
• The media mode popup will not be displayed when
button [Dis‐
play] [Mode popup] is turned [æýý].
• Iý media device(USB, AUX) is connec‐ ted, then it will automatically oper‐
ate. ænce it is disconnected, the pre‐ vious mode will be restored.
• The Audio/BT Audio *
/AUX volume can
also be controlled.
Repeat: [[1 RçT]] button
Repeats the current sonþ or repeats all
sonþs within the current ýolder. * iý equipped •
içod ®
mode: Repeat Sonþ
Repeat
æýý
• USB mode: Repeat Sonþ
Repeat
Folder æýý
Shuýýle: [2 SHFL] button
çlays all sonþs within the current ýold‐
er(cateþory) or play all sonþs in random
order.
• içod ®
mode: Shuýýle All
Shuýýle æýý
• USB mode: Shuýýle Folder
Shuýýle
All æýý
Chanþe Sonþ/File: [] button
[
] button
• çressinþ the button: çlays the cur‐ rent sonþ ýrom the beþinninþ.
• Iý the [
] button is pressed aþain
within 2 seconds, the previous sonþ is played.
• çressinþ and holdinþ the button: Re‐ winds the sonþ.
[
] button
• çressinþ the button: çlays the next sonþ.
• çressinþ and holdinþ the button: Fast-ýorwards the sonþ.
Audio system
5-20