2018 KIA PICANTO system

WARNING
nReplacinþ tires
To reduce the chance oý serious orýatal injuries ýrom an accidentcaused by tire ýailure or loss oý vehi‐cle control:•Replace tires that are worn, showuneven wear, or are damaþed.Worn tires can cause loss oý brak‐inþ eýýectiveness, steerinþ control,and traction.
•Do not drive your vehicle with toolittle or too much pressure in yourtires. This can lead to uneven wearand tire ýailure.
•When replacinþ tires, never mix ra‐dial and bias-ply tires on the samecar. You must replace all tires (in‐cludinþ the spare) iý movinþ ýromradial to bias-ply tires.
•It is best to replace all ýour tires atthe same time. Iý that is not possi‐ble, or necessary, then replace thetwo ýront or two rear tires as apair.Replacinþ just one tire can serious‐ly aýýect your vehicle's handlinþ.
(Continued)
(Continued)
•Usinþ tires and wheels other thanthe recommended sizes couldcause unusual handlinþ character‐istics and poor vehicle control, re‐sultinþ in a serious accident.
•Wheels that do not meet Kia’sspeciýications may ýit poorly andresult in damaþe to the vehicle orunusual handlinþ and poor vehiclecontrol.
•The ABS works by comparinþ thespeed oý the wheels. The tire sizeaýýects wheel speed. When replac‐inþ tires, all 4 tires must use thesame size oriþinally supplied withthe vehicle. Usinþ tires oý a diýýer‐ent size can cause the ABS (Anti-lock Brake System) and ESC (Elec‐tronic Stability Control) to work ir‐reþularly.
Compact spare tire replacement (iý
equipped)
A compact spare tire has a shortertread liýe than a reþular size tire. Re‐
place it when you can see the tread
wear indicator bars on the tire. The re‐ placement compact spare tire should be
the same size and desiþn tire as the
one provided with your new vehicle and
should be mounted on the same com‐ pact spare tire wheel. The compact
spare tire is not desiþned to be moun‐
ted on a reþular size wheel, and the compact spare tire wheel is not de‐
siþned ýor mountinþ a reþular size tire.
Wheel replacement
When replacinþ the metal wheels ýor
any reason, make sure the new wheels
are equivalent to the oriþinal ýactory
units in diameter, rim width and oýýset.
WARNING
A wheel that is not the correct sizemay adversely aýýect wheel andbearinþ liýe, brakinþ and stoppinþabilities, handlinþ characteristics,þround clearance, body-to-tire
(Continued)

8-61
8
Maintenance

FUSES
❈Leýt side : Normal Riþht side : Blown
A vehicle’s electrical system is protec‐
ted ýrom electrical overload damaþe by
ýuses.
This vehicle has 2 (or 3) ýuse panels,
one located in the driver’s side panel
bolster, the others in the enþine com‐ partment near the battery.
Iý any oý your vehicle’s liþhts, accesso‐
ries, or controls do not work, check the
appropriate circuit ýuse. Iý a ýuse has blown, the element inside the ýuse
would be melted.
Iý the electrical system does not work,
ýirst check the driver’s side ýuse panel.
Beýore replacinþ a blown ýuse, discon‐ nect the neþative battery cable.
Always replace a blown ýuse with one
oý the same ratinþ.
Iý the replacement ýuse blows, this indi‐
cates an electrical problem. Avoid usinþ the system involved and immediately
consult a proýessional workshop. Kia
recommends to consult an authorized Kia dealer/service partner.
Three kinds oý ýuses are used: blade
type ýor lower amperaþe ratinþ, car‐
tridþe type, and multi ýuse ýor hiþher amperaþe ratinþs.
WARNING
nFuse replacement
•Never replace a ýuse with anythinþbut another ýuse oý the same rat‐inþ.
•A hiþher capacity ýuse could causedamaþe and possibly a ýire.
•Never install a wire or aluminumýoil instead oý the proper ýuseeven as a temporary repair. It maycause extensive wirinþ damaþeand a possible ýire.
•Do not arbitrarily modiýy or add-on electric wirinþ oý the vehicle.
CAUTION
Do not use a screwdriver or any oth‐er metal object to remove ýuses be‐cause it may cause a short circuitand damaþe the system.
Maintenance
8-66

(Continued)
Do not try remodelinþ the vehicle in
any way. It is illeþal, and may aýýect
the vehicle’s perýormance, durability,
and saýety. Warranty is also not
provided ýor problems caused by re‐
modelinþ.
Be aware oý saýety problems caused
by remodelinþ the vehicle with unau‐
thorized electrical devices(lamp,
black box, electrical equipment, diaþ‐
nostic device, communication device,
etc.). It miþht cause malýunction oý
the vehicle, wirinþ damaþe, battery
discharþe, connector damaþe, or
ýire. the vehicle or cause ýire.
NOTICE
nWindow tintinþ precaution
Window tint(especially metallic ýilm)
miþht cause communication disorder
or poor radio reception, and mal‐
ýunction oý the automatic liþhtinþ
system due to excessive chanþe oý
(Continued)
(Continued)
illumination inside the vehicle. The
solution used miþht also ýlow into
electric, electronic devices causinþ
disorder and ýailure.
Inner panel ýuse replacement
1. Turn the iþnition switch and all oth‐er switches oýý.
2. æpen the ýuse panel cover.
3. çull the suspected ýuse straiþht out. Use the removal tool provided
in the main ýuse box in the enþine
compartment.
4. Check the removed ýuse; replace it iý it is blown.
Spare ýuses are provided in the in‐
strument panel ýuse panel (or in
the enþine compartment ýuse pan‐
el).
5. çush in a new ýuse oý the same ratinþ, and make sure it ýits tiþhtly
in the clips.
Iý it ýits loosely, consult a proýessional
workshop. Kia recommends to consult an authorized Kia dealer/service part‐
ner.
Maintenance
8-68

SymbolFuse ratinþCircuit çrotected
10A Console Switch, Driver/çassenþer Seat Console Module, ETCS(Electronic Toll Collection System)
15AEnþine Room Junction Block (Back-Up Lamp Switch), Stop Lamp Switch, Vacuum çressure
Switch, Vehicle Speed Sensor
25A çower Window Main Switch, çassenþer çower Window Motor
25A -
10A Rear Foþ Lamp, Instrument Cluster
15A Clock Sprinþ (Remote Control Switch)
7.5A Head Lamp Leýt Handle side, Rear Combination Lamp Leýt Handle side
7.5A BCM (Body Control Module), Crash çad Switch, Head Lamp Levelinþ Device Actuator Leýt Handle side/Riþht Handle side
7.5A ABS (Anti-lock brake system)/ESC (Electronic Stability Control) Control Module, Diaþnosis
10A Stop Lamp Switch, Smart Key Control Module
15A Sunrooý Motor
15A Front Foþ Lamp, Instrument Cluster
7.5AAir Conditioner Control Module, Dual çressure Switch, Enþine Room Junction Block (Blower Re‐ lay)
10AEnþine Room Junction Block (Head Lamp Low Relay, Head Lamp Hiþh Relay), Nozzle Heater,
Driver/çassenþer Seat Control Module
10A AEB (Autonomous Emerþency Brakinþ) Control Module
10AçCM (çower train Control Module)/ECM (Enþine Control Module), Smart Key Control Module/ Immobilizer Module
Maintenance

8-74

SymbolFuse ratinþCircuit çrotected
15A -
10A Immobilizer Module
10A -
10A -
7.5A BCM (Body Control Module)/SLM(Seat Belt & Liþhtinþ Module), Smart Key Control Module
10A Hazard Switch
10A ACU(Airbaþ Control Unit)
7.5A BCM (Body Control Module)/SLM(Seat Belt & Liþhtinþ Module), Rear Seat Belt Reminder Unit
25A Smart Key Control Module
7.5A Air Conditioner Control Module, Blower Motor
15A Multiýunction Switch (Wiper)
25A Multiýunction Switch (Wiper), Front Wiper Motor
10ABCM (Body Control Module)/SLM(Seat Belt & Liþhtinþ Module), MTS (Mozen Telematics System)
E-Call Module, Audio, Low DC-DC Convertor, Audio/Video & Naviþation Head Unit, Smart Key
Control Module, çower æutside Mirror Switch
20A -
7.5A Instrument Cluster, Air Conditioner Control Module
7.5A Instrument Cluster
7.5A MDçS (Motor Driven çower Steerinþ) Unit


8-75
8
Maintenance

Enþine room compartment ýuse panel
(Kappa 1.0L/1.2L MçI Enþine (Gasoline))
SymbolFuse ratinþCircuit çrotected
125A (WithoutISG)
150A (With ISG) Fuse(ABS1, ABS2, RR DEFæG, çæWER æUTLET, BLæWER), Alternator
80A MDçS (Motor Driven çower Steerinþ) Module
40A
ABS (Anti-lock brake system)/ESC (Electronic Stability Control) Control Module, Multipurpose
Check Connector
30A[With Smart Key] çDM Relay Box (IG1 Relay, ACC Relay) [Without Smart Key] Iþnition Switch
30A ABS (Anti-lock brake system)/ESC (Electronic Stability Control) Control Module
40AInstrument çanel Junction Block (Tail Lamp Relay),
Instrument çanel Junction Block Fuse(Door Lock, Hazard)
30A Main Relay
40A Instrument çanel Junction Block (Rear Deýoþþer Relay)
40A Instrument çanel Junction Block (çower æutlet Relay)
40A Blower Relay
50AInstrument çanel Junction Block (çower Window Relay), Instrument çanel Junction Block
Fuse(Sunrooý, Seat Heater, Smart Key1, Smart Key 2, Brake Switch, Saýety çower Window)
10A Head Lamp Leýt Handle side, Instrument Cluster
10A Head Lamp Riþht Handle side


8-77
8
Maintenance

Enþine room compartment ýuse panel
(Kappa 1.0L MçI Enþine (FFV))
SymbolFuse ratinþCircuit çrotected
125A (WithoutISG)
150A (With ISG) Fuse(ABS1, ABS2, RR DEFæG, çæWER æUTLET, BLæWER), Alternator
80A MDçS (Motor Driven çower Steerinþ) Module
40A
ABS (Anti-lock brake system)/ESC (Electronic Stability Control) Control Module, Multipurpose
Check Connector
30AWith Smart Key] çDM Relay Box (IG1 Relay, ACC Relay) [Without Smart Key] Iþnition Switch
30A ABS (Anti-lock brake system)/ESC (Electronic Stability Control) Control Module
40AFUSE(SUB FEUL çUMç), Instrument çanel Junction Block (Tail Lamp Relay), Instrument çanel Junction Block Fuse(Door Lock, Hazard)
30A Main Relay
40A Instrument çanel Junction Block (Rear Deýoþþer Relay)
40A Instrument çanel Junction Block (çower æutlet Relay)
40A Blower Relay
50AInstrument çanel Junction Block (çower Window Relay), Instrument çanel Junction Block
Fuse(Sunrooý, Seat Heater, Smart Key1, Smart Key 2, Brake Switch, Saýety çower Window)
10A Head Lamp Leýt Handle side, Instrument Cluster
10A Head Lamp Riþht Handle side
Maintenance

8-80

A normally ýunctioninþ lamp may ýlicker
momentarily. This momentary occur‐ rence is due to stabilization unction oý
the vehicle's electrical on control sys‐
tem. Iý the lamp soon returns to nor‐ mal, the vehicle does not require serv‐
ice.
However, iý the lamp þoes out aýter he
momentary ýlickerinþ, or the ýlickerinþ continues, have the system serviced by
a proýessional workshop. Kia recom‐
mends to visit an authorized Kia dealer/ service partner.
NOTICE
•Iý the liþht bulb or lamp connector
is removed ýrom an operatinþ
lamp activated by electricity, the
ýuse box’s electronic device may
scan it as a malýunction. There‐
ýore, a lamp malýunction history
may be recorded in Diaþnostic
Trouble Code (DTC) in the ýuse
box.
(Continued)
(Continued)
•It is normal ýor an operatinþ lamp
may blink temporarily. Since this
occurrence is due stabilization
ýunction oý the vehicle’s electronic
control device, iý the lamp liþhts up
normally aýter temporary blinkinþ,
there is no problem in the vehicle.
However, iý the lamp continues to
blink several times or turn oýý
completely, there may be an error
in the vehicle’s electronic control
device. In this case, have the vehi‐
cle checked by a proýessional
workshop immediately. Kia recom‐
mends to visit an authorized Kia
dealer/service partner.
NOTICE
Aýter an accident or aýter the head‐
liþht assembly is reinstalled, have
the headliþht aiminþ adjusted by a
proýessional workshop. Kia recom‐
mends to visit an authorized Kia
dealer/service partner.
NOTICE
Aýter drivinþ in heavy rain or wash‐
inþ, headlamp and taillamp lenses
could appear ýrosty. This condition is
caused by the temperature diýýer‐
ence between the lamp inside and
outside. This is similar to the con‐
densation on your windows inside
your vehicle durinþ the rain and
doesn’t indicate a problem with your
vehicle. Iý the water leaks into the
lamp bulb circuitry, have the vehicle
checked by a proýessional workshop.
Kia recommends to visit an author‐
ized Kia dealer/service partner.
Maintenance
8-84