2018 INFINITI QX30 display

Movie Times information
Menu itemAction
[Movie Listings] [Select City] Select from list Select the city. [Theater] [Movies] Select from list Display detailed movie infor- mation.
[Theater Info] Display theater information.
[GO]* Set a destination selected from the list of theaters.
[Near Destination]* Display the theater near the vehicle's destination.
[Near Current Loc.]* Display the theater near the vehicle's current location.
[Selected City] Change the city.
[Movie] Select from list Display information for the
movie theater selected from
the list.
[Details] Display movie title, rating and
run time.
*: Models with navigation system only.
SXM Info Settings information
Menu item Action
[SXM Info Settings] [Weather Alert] Set weather alert on/off.
Display screen, heater and air conditioner, and audio system4-121

Default City Settings information
Menu itemAction
[Default City] State list City list Set the current location. This setting is necessary to display weather informa-
tion and movie information.
[Change Country] Select country.
SETTINGS MENU
The Infiniti InTouch system can be customized to make it easier for you to use by adjusting various settings.
Push

Setting itemResult
[Navigation]* Display the Navigation setting screen.
Refer to the Navigation Owner's Manual for details.
[Audio] Display the Audio settings screen.
See "Audio settings" earlier in this section
[Screen] Set the screen display to the preferred settings.
See "Screen settings" earlier in this section
[Volume Adjustment] Set the volume for each item. See "Volume settings" earlier in this section
[Clock] Set the Clock to your preferred settings.
See "Clock settings" earlier in this section
[InTouch Services] Set INFINITI InTouch
TMServices.
Refer to the Navigation Owner's Manual for details.
[Voice recognition] Set Minimize Voice Feedback to on/off and the audio setting for voice
recognition use.
[Camera/Sonar] Set the camera and parking sensor (sonar) to the preferred settings.
See "Around View Monitor setting" earlier in this section
[Other] [Language] Set the language to the preferred settings.
See "Language settings" earlier in this section
[Keyboard Type] Set the Keyboard Type to [QWERTY] or [ABC].
[Low on Fuel Alert] Set the fuel low notification to on/off.
[Software information] Display the software information.
* : Models with navigation system.
NOTE
•The displayed items vary depending on the vehicle model and equipped options.•The order of displayed items can be sorted.
Display screen, heater and air conditioner, and audio system4-123

CUSTOMER ASSISTANCE
For assistance or inquiries about Infiniti InTouch, or to order updated map data for the navigation system (if equipped), it is recommended you
contact an INFINITI retailer.
SYSTEM UNIT
Liquid crystal display
SymptomPossible causePossible solution
The screen is too dark. The cabin temperature is too low.Wait until the cabin temperature becomes
moderate.
Screen brightness is set to the maximum darkness. Adjust the brightness setting of the screen. "Screen settings" earlier in this section
The screen is too bright. Screen brightness is set to the maximum
brightness. Adjust the brightness setting of the screen.
"Screen settings" earlier in this section
A small black spot or a small bright spot appears on the screen. This is a phenomenon typical to liquid crystal
displays. This is not a malfunction.
A dot or stripe pattern appears on the screen. Electromagnetic waves that are generated from neon billboards, high voltage electric power
cables, ham radios or other radio devices equipped to other vehicles may adversely affect the screen. This is not a malfunction.
Image lag appears on the screen. Phenomenon typical of liquid crystal displays. This is not a malfunction.
Image motion displayed on the screen is slow. The cabin temperature is below 32 °F (0 °C). Wait until the in-cabin temperature rises to above 32 °F (0 °C).
When looking at the screen from an angle, the screen lightens or darkens. This is a phenomenon typical to liquid crystal
displays. Adjust the brightness setting of the screen.
"Screen settings" earlier in this section
TROUBLESHOOTING GUIDE
4-124Display screen, heater and air conditioner, and audio system

SymptomPossible causePossible solution
The screen turns blue or an error message is displayed on the display. The SD card is not inserted into the slot correctly. If the SD card containing map data is accidentally
removed, after re-inserting the SD card
containing map data into the slot, place the
ignition switch in the OFF position and then back in the ON position again.
A system malfunction has occurred. It is recommended you contact an INFINITI
retailer for inspection.
AUDIO SYSTEM
HD Radio Technology
Sound:
Symptom Possible cause Possible solution
Delay in digital audio on HD Radio broadcasts. The radio acquires an analog station first and blends to a digital signal.This is not a malfunction.
Audio skip, stutter or echo. The radio station has not properly aligned the digi-
tal and analog audio. Verify correct operation on another station. Report
any station with poor performance.
Volume changing up/down. The radio station has not properly aligned digital
and analog audio level. Verify correct operation on another station and
check www.hdradio.com for stations in the area. Report any station with poor performance.
Sound fading in and out. The transition between analog and digital is taking
place (blending). Verify transition performance on several stations in
the area. Report any station with poor perfor- mance.
Excessive blending (Transition between analog and digital). The receiver is located near the edge of the digital
coverage area. Refer to www.hdradio.com to verify stations in
your coverage area.
Digital audio not better than analog audio. Audio processing on the digital audio at a station can potentially decrease the digital audio soundquality. Verify correct operation on another station. Report
any station with poor performance.
Display screen, heater and air conditioner, and audio system4-125

Functional:
SymptomPossible cause Possible solution
Keep losing my local stations. The digital coverage is slightly less than the analog
signal coverage. Verify correct operation on another station. This is
expected behavior.
Shadowing (urban/terrain) can cause reduced digi- tal coverage. Verify correct operation on another station.
Some data fields are blank. Text information is sent at the broadcaster's discre-
tion. Verify correct operation on another station. Report
station issues.
Text information is truncated / appears to be more available. The display is limited to a fixed number of charac-
ters and more data is being sent than can be shown. This is intended behavior. Refer to the Owner's
Manual for ability to access addition.
AM reception changes at night. AM stations are required by the government (FCC)
to lower their power at night. This is not a malfunction.
4-126Display screen, heater and air conditioner, and audio system

Compact Disc (CD) player
SymptomPossible cause Possible solution
Music cannot be played back. The disc is inserted upside down.Insert a CD with the label side facing up.
Moisture has accumulated inside the unit. Wait until the moisture evaporates. (approximately 1 hour)
The cabin temperature is too high. Wait until the cabin temperature becomes
moderate.
The disc is scratched or dirty. Wipe off any dirt from the disc.
Scratched discs cannot be recovered. Replace the disc.
Depending on the condition in which they are stored, discs may become unreadable due to
deterioration (for example, keeping the discs in the passenger compartment, etc.). Replace the disc with a deterioration-free disc. Do
not use a deteriorated disc. The label surface of the disc may crack or chip, and the layer of the label surface may eventually peel off.
Compressed audio files cannot be played back. If both music CD files (CD-DA data) and compressed audio files (MP3 data, etc.) are mixedon one disc, the compressed audio files cannot be played back. Prepare a disc that contains compressed audio files
only.
The files are not named using characters that are compliant with the specifications. Use the character codes and the number of
characters that are compliant with the
specifications for folder names and file names. In addition, always use “.MP3”, “.WMA”, “.mp3” or “.wma” file extensions.
It takes a long time before the music starts playing. The disc contains a large amount of data. Some time may be required to check the files. It is recommended that unnecessary folders or any filesother than compressed audio files should not be recorded on a disc.
The sound quality is poor. The disc is dirty.Wipe off any dirt from the disc.
Display screen, heater and air conditioner, and audio system4-127

SymptomPossible cause Possible solution
No sounds are played although the CD play time is displayed. The system is playing the first track of a mix mode
disc. (Mix mode is a format in which data except
music is recorded on the first track and music data is recorded on one other than the first track in a session.) Play music data in other tracks.
Music cuts off or skips. The combination of writing software and hardware
might not match; or the writing speed, writingdepth, writing width, etc. might not match the specifications. Create a disc using different writing speed settings,
etc.
The system skips the selected track and moves to the next track. A non-MP3/WMA file has been given an extension
of “.MP3”, “.WMA”, “.mp3” or “.wma”. Prepare MP3/WMA files.
Some of the file cannot be played due to copyright protection. Prepare playable files.
The tracks do not play back in the desired order. The folder locations on the disc are changed by the writing software while the files are written on thedisc. Check the settings of the writing software and
create a new disc.
4-128Display screen, heater and air conditioner, and audio system