2018 Hyundai Elantra audio

4-27
Multimedia System
4
(Continued)
• Some non-standard USB devices(METAL COVER TYPE USB) can be
unrecognizable.
• Some USB flash memory readers (such as CF, SD, micro SD, etc.) or external-
HDD type devices can be unrecogniz-
able.
• Music files protected by DRM (DIGITAL RIGHTS MANAGEMENT) are not rec-
ognizable.
• The data in the USB memory may be lost while using this audio. Always back
up important data on a personal storage
device.
• Please avoid using USB memory products which
can be used as key chains
or cellular phone acces-
sories as they could cause
damage to the USB jack. Please make
certain only to use plug type connector
products.Information
- Using iPod®Device
iPod®is a registered trademark of Apple
inc.
• Some iPod
®models may not support
communication protocol and files may
not play properly.
Supported iPod
®models :
- iPhone®3GS/4
- iPod®touch 1st~4th generation
- iPod®nano 1st~6th generation
- iPod®classic
• The order of search or playback of songs in the iPod
®can be different from the
order searched in the audio system.
• If the iPod
®is disabled due to its own
malfunction, reset the iPod®. (Reset:
Refer to iPod®manual)
• An iPod®may not operate normally on
low battery.
• Some iPod
®devices, such as the
iPhone®, can be connected through the
Bluetooth®Wireless Technology inter-
face. The device must have audio
Bluetooth
®Wireless Technology capability
(such as for stereo headphone Bluetooth®
Wireless Technology).The device can play,
but it will not be controlled by the audio
system.
(Continued)(Continued)
• To use iPod
®features within the audio
mode, use the cable with iPod®device.
• Skipping or improper operation may occur depending on the characteristics
of your iPod
®/iPhone®device.
• If your iPhone®is connected to both the
Bluetooth®Wireless Technology and
USB, only iPod®mode will be supported
during Bluetooth®Audio treaming. To
use Bluetooth®Audio Str eaming, discon-
nect iPod®/iPhone®cable.
• When connecting iPod®with the iPod®
Cable, fully insert the USB connector
side of the cable into the vehicle USB
port. If not inserted completely, commu-
nications between the iPod
®and audio
may be interrupted.
• When adjusting the iPod
®sound set-
tings and the audio system, the audio
sound of both devices may overlap and
may reduce or distort the sound quality.
• Deactivate (turn off) the iPod
®equalizer
function when adjusting the audio sys-
tem's volume, and turn off the audio
system equalizer when using the iPod
®
equalizer.
(Continued)
i

4-28
Multimedia System
(Continued)
• Disconnect the iPod®cable when not
using the iPod®with the vehicle audio
system. Otherwise, iPod®may remain in
accessory mode, and may not work prop-
erly.
• Use an iPod
®/iPhone®USB cable shorter
than 1 meter in length, longer cables can-
not be recognized.
Information
- Using the Bluetooth®Wireless
Technology Cellular Phone
(if equipped)
• Bluetooth
®Wireless Technology
Handsfree refers to a device which
allows the user to conveniently make
phone calls with Bluetooth
®Wireless
Technology mobile phones through the
audio system.
• Bluetooth
®Wireless Technology allows
devices to be connected in a short dis-
tance, including hands-free devices,
stereo headsets, wireless remote con-
trollers, etc. For more information, visit
the Bluetooth
®Wireless Technology
website at www.Bluetooth.com. Before
using Bluetooth®Wireless Technology
audio features.
• The Bluetooth
®word mark and logos
are registered trademarks owned by
Bluetooth
®SIG, Inc. and any use of such
marks by Hyundai is under license.
Other trademarks and trade names are
those of their respective owners. A
Bluetooth
®enabled cell phone is
required to use Bluetooth®Wireless
Technology.
(Continued)(Continued)
•
Bluetooth
®Wireless Technology fea-
tures supported within the vehicle are as
follows. Some features may not be sup-
ported depending on your Bluetooth
®
Wireless Technology device.
- Answering and placing Bluetooth®
Wireless Technology Handsfree calls
- Menu operation during call (Switch to Private, Switch to call waiting,
Outgoing volume)
- Download Call History
- Download Mobile Phone book
- Phone book/Call History Auto Download
- Bluetooth
®Wireless Technology
device auto connection
- Bluetooth
®Wireless Technology
Audio
• Before using Bluetooth
®Wireless
Technology related features of the audio
system, refer your phone’s User’s
Manual for phone-side Bluetooth
®
Wireless Technology operations.
(Continued)
i

4-29
Multimedia System
4
(Continued)
• The phone must be paired to the audiosystem to use Bluetooth
®Wireless
Technology related features.
• Pairing and connecting a Bluetooth
®
Wireless Technology enabled mobile
phone will work only when the
Bluetooth
®Wireless Technology option
within your mobile phone has been
turned on. (Methods of turning on the
Bluetooth
®Wireless Technology enabled
feature may differ depending on the
mobile phone.)
• Do not use a cellular phone or perform Bluetooth
®Wireless Technology settings
(e.g. pairing a phone) while driving.
• Even if the phone supports Bluetooth
®
Wireless Technology, the phone will not
be found during device searches if the
phone has been set to hidden state or the
Bluetooth
®Wireless Technology power
is turned off. Disable the hidden state or
turn on the Bluetooth
®Wireless
Technology power prior to
searching/connecting with the car audio
system.
(Continued)(Continued)
• You will not be able to use the hands-
free feature when your phone (in the
car) is outside of the cellular service area
(e.g. in a tunnel, in an underground
location, in a mountainous area, etc.).
• If the cellular phone signal is poor or the vehicle’s interior noise is too loud, it
may be difficult to hear the other per-
son’s voice during a call.
• Do not place the phone near or inside metallic objects, otherwise communica-
tions with Bluetooth
®Wireless
Technology system or cellular service
stations can be disturbed.
• Placing the audio system within an elec- tromagnetic environment may result in
noise interference.
• Some cellular phones or other devices may cause interference noise or a mal-
function to the audio system. In this
case, storing the device in a different
location may resolve the condition.
• While a phone is connected through Bluetooth
®Wireless Technology your
phone may discharge quicker than usual
for additional Bluetooth
®Wireless
Technology-related operations.
(Continued)(Continued)
• If Priority is set upon vehicle ignition
(IGN/ACC ON), the Bluetooth
®
Wireless Technology phone will be auto-
matically connected. Even if you are
outside, the Bluetooth
®Wireless
Technology phone will be automatically
connected once you are in the vicinity of
the vehicle. If you do not want to auto-
matically connect your Bluetooth
®
Wireless Technology phone, try the fol-
lowing.
1) Turn off the Bluetooth
®Wireless
Technology feature in your mobile
phone.
2) Turn off the Bluetooth
®Wireless
Technology feature in your car audio
system.
- To turn off the Bluetooth
®Wireless
Technology feature in your car audio
system, go to [SETUP/CLOCK] >
[Phone] and [turn off] the Bluetooth
®
Wireless Technology feature.
(Continued)

4-30
Multimedia System
(Continued)
•Bluetooth®Wireless Technology connec-
tion may become intermittently discon-
nected in some mobile phones. Follow
these steps to try again.
1) Turn the Bluetooth
®Wireless
Technology function within the mobile
phone off/on and try again.
2) Turn the mobile phone power Off/On and try again.
3) Completely remove the mobile phone battery, reboot, and then try again.
4) Reboot the audio system and try again.
5) Delete all paired devices, pair and try again.
• It is possible to pair up to five Bluetooth
®Wireless Technology devices
to the car system.
• Phone contact names should be saved in English or they may not be displayed
correctly.
• The Handsfree call volume and quality may differ depending on the mobile
phone.
• Only one Bluetooth
®Wireless
Technology device can be connected at a
time.
(Continued)(Continued)
• In some mobile phones, starting the
ignition while talking through
Bluetooth
®Wireless Technology enabled
handsfree call will result in the call
becoming disconnected. (Switch the call
back to your mobile phone when start-
ing the ignition.)
• If the mobile phone is not paired or con- nected, it is not possible to enter Phone
mode. Once a phone is paired or con-
nected, the guidance screen will be dis-
played.
• Bluetooth
®Handsfree may not be sup-
ported in some mobile phones. To learn
more about mobile device compatibility,
visit http://www. hyundai.com/us/en/
content/owners/bluetooth.
• Bluetooth
®Wireless Technology
Handsfree is a feature that enables driv-
ers to practice safe driving. Connecting
the car audio system with a Bluetooth
®
Wireless Technology phone allows the
user to conveniently make calls, receive
calls, and manage the phone book.
Before using the Bluetooth
®Wireless
Technology, carefully read the contents
of this user's manual. Excessive use or operations while
driving may lead to negligent driv-
ing practices and be the cause of
accidents.
Do not operate the device exces- sively while driving.
Viewing the screen for prolonged periods of time while driving is dan-
gerous and may lead to accidents.
NOTICE

4-31
Multimedia System
4
Information
- Using Voice Recognition(if equipped)
• When using the voice recognition fea- ture, only commands listed within the
user's manual are supported.
• Be aware that when the voice recogni- tion system is active, pressing any but-
ton other than the button terminates
voice recognition mode.
• For optimal voice recognition perform- ance, position your head below the
microphone located above the driver’s
seat and maintain proper position when
speaking voice commands.
• Within the following situations, voice recognition may not function properly
due to external sound.
- When the windows and sunroof areopen
- When the blower AC/heater is set to high
- When entering and passing through tunnels
- When driving on rugged and uneven roads
(Continued)(Continued)
- During severe rain (heavy rains,windstorms)
• Phone related voice commands can be used only when a Bluetooth
®Wireless
Technology device is connected.
• When making calls by name, the corre- sponding contact must be downloaded
and stored within the audio system.
• After downloading the phone book, it takes some time to convert the phone
book data into voice information.
During this time, voice recognition may
not operate properly.
• Pressing and holding the button : While holding the button, frequency changes
without stopping. When the button is
released, the system automatically
searches for the next frequency from
that point.
i

4-36
Multimedia System
Media Mode
With the Media Mode Button
Press the [MEDIA]button to change the
mode in the order of CD ➟ USB(iPod®) ➟AUX ➟ My Music*➟ BT Audio*.
* if equipped
The folder/file name is displayed on the
screen.
The CD is automatically played when a
CD is inserted.
The USB music is automatically played
when a USB is connected.
Repeat
While song (file) is playing[RPT]
but-
ton
Audio CD, MP3 CD, USB, iPod
®, My
Music* mode : RPT on screen
To repeat one song (press the button) : Repeats the current song.
MP3 CD, USB mode : FLD.RPT on
screen
To repeat folder (press the button twice) : Repeats all files within the cur-
rent folder.
Press the [RPT] button again to turn off
repeat.
* if equipped
■ My Music Mode (if equipped)
■ USB Mode
■ MP3 CD Mode
■ Audio CD Mode

4-37
Multimedia System
4
Random
While song (file) is playing[RDM]
but-
ton
Audio CD, My Music* mode : RDM
on screen
Random (press the button) : Plays all songs in random order.
MP3 CD, USB mode : FLD.RDM on
screen
Folder Random (press the button) :Plays all files within the current folder
in random order.
iPod
®mode : ALL RDM on screen
All Random (press the button) : Plays all files in random order.
MP3 CD, USB : ALL RDM on screen
All Random (press the button twice) : Plays all files in random order.
Press the [RDM] button again to turn off
random.
* if equipped
Changing Song/File
While song (file) is playing [
SEEK
TRACK
∨ ∨] button
Short press : Plays the current song from the beginning.
If the [ SEEK TRACK ∨
∨] button is
pressed again within 2 seconds, the
previous song is played.
Press and hold : Rewinds the song.
While song (file) is playing [
SEEK
TRACK
∧ ∧] button
Short press : Plays the next song.
Press and hold : Fast forwards the song.
Scan
While song (file) is playing  [SCAN]
but-
ton
Short press : Scans all songs from the next song for 10 seconds each.
Press the [SCAN] button again to turn
off.
The SCAN function is not supported in iPod
®mode.
Folder Search
(Only MP3 CD, USB mode)
While file is playing  [FOLDER ∧ ∧]
( [CAT/FOLDER
∧
∧]) button

While file is playing  [FOLDER ∨
∨]
( [CAT/FOLDER
∨
∨]) button

If a folder is selected by pressing the
TUNE knob, the first file within the
selected folder will be played.
In iPod
®mode, moves to the Parent
Folder.
Searching Songs/Files
Turning TUNEknob : Searches for
songs (files)
Pressing TUNEknob : Plays selected
song (file).

4-38
Multimedia System
MENU : Audio CD
Press the Audio CD mode [MENU] but-
ton to set the Repeat, Random,
Information features.
Repeat : [1] Button
Repeat the current song.
Press RPT again to turn off.
Random : [2] Button
Randomly play songs within the current
CD.
Press RDM again to turn off.
Information : [3] Button
Display information of the current song.
Press the [MENU] button to turn off info
display.
MENU : MP3 CD/USB
Press the MP3 CD/USB mode [MENU]
button to set the Repeat, Folder
Random, Folder Repeat, All Random,
Information, and Copy features.
Repeat : [1] Button
Repeat the current song.
Press RPT again to turn off.
Folder Random : [2] Button
Randomly play songs within the current
folder.
Press F.RDM again to turn off.
Folder Repeat : [3] Button
Repeat songs within the current folder.
Press F.RPT again to turn off.
All Random : [4] Button
Randomly play all songs within the
CD/USB.
Press A.RDM again to turn off.
Information : [5] Button
Display information of the current song.
Press the [MENU] button to turn off info
display.
Copy : [6] Button (if equipped)
This is used to copy the current song into
My Music. You can play the copied Music
in My Music mode.
If another button is pressed while copy-
ing is in progress, a pop up asking you
whether to cancel copying is displayed.
If another media is connected or inserted
(USB, CD, iPod
®, AUX) while copying is
in progress, copying is canceled.
Music will not be played while copying is
in progress.