302
uuCustomized Features u
Features
Driver Assist System SetupForward Collision Warning Distance
ACC Forward Vehicle Detect Beep
Lane Keeping Assist Suspend Beep
Road Departure Mi tigation Setting
Adjust Outside Temp. Display
“Trip A” Reset Timing
“Trip B” Reset Timing
Vehicle
Meter Setup
Adjust Alarm Volume
New Message Notifications
Turn By Turn Auto Display
Speed/Distance Units
CancelTPMS Calibration
Calibrate
Fuel Efficiency Backlight
Memory Position LinkDriving Position Setup
Reverse Alert Tone
18 CLARITY ELECTRIC CSS-31TRV6100.book  302 ページ  2018年2月5日 月曜日 午後12時0分 
316
uuCustomized Features u
Features
*1:Default SettingSetup 
Group Customizable Features Desc
ription Selectable Settings
System Others Climate Screen Timeout
Changes the length of time the climate control 
display stays on when you press the 
CLIMATE 
button. Never/
5 Seconds /10 
Seconds
*1/ 20 
Seconds
Detail Information Displays the details of the head unit and 
operating system information.
Default Cancels /Resets all cust
omized items in the 
System  group as default. Yes
/No
Vehicle
TPMS CalibrationCancels/Calibrates the TPMS.Cancel /Calibrate
Driver 
Assist 
System 
Setup
Forward Collision Warning 
DistanceChanges the distance at which CMBSTM alerts.Long /Normal*1/Short
ACC Forward Vehicle 
Detect BeepCauses the system to beep when the system 
detects a vehicle, or when the vehicle goes out of 
the ACC with LSF range.
On /Off*1
Lane Keeping Assist 
Suspend BeepCauses the system to  beep when LKAS is 
suspended.On /Off*1
Road Departure Mitigation 
SettingChanges the setting for the road departure 
mitigation system.Normal*1/Wide /
Warning Only
18 CLARITY ELECTRIC CSS-31TRV6100.book  316 ページ  2018年2月5日 月曜日 午後12時0分 
520
uuIndicator, Coming On/Blinking uIf the Electric Power Steering (EPS) System Indicator Comes On
Handling the Unexpected
If the Electric Power Steeri ng (EPS) System Indicator 
Comes On
■Reasons for the indicator to come on
• Comes on when there is a problem with the EPS system.
• If you depress the accelerator pedal  repeatedly to increase the motor 
speed while the motor is idling,  the indicator comes on, and 
sometimes the steering wheel becomes harder to operate.
• Comes on when the EPS st eering angle center point memory is lost. 
This could be due to a number of problems including: battery 
disconnection, main fuse blow, low battery causing the reset of the 
EPS system, wire damage to EPS harness. Vehicle Stability Assist® 
(VSA ®), VSA ® OFF, Collision Mitigation Braking System
TM (CMBSTM), 
and low tire pressure/TPMS indicato rs come on along with a message 
in the driver information interface.
■What to do when the indicator comes on
• Stop the vehicle in a safe place, tu rn off the power system, and turn 
on the power system again.
If the indicator re-appears and stays  on, immediately have your vehicle 
inspected by an authorized Ho nda Clarity Electric dealer.
• If VSA ® indicator, VSA ® OFF indicator, CMBS
TM indicator, and low tire 
pressure/TPMS indicator come on alo ng with a message in the driver 
information interface, you need to  calibrate the VSA and EPS systems.
Drive a short distance at more than 12 mph (20 km/h) to calibrate the 
VSA and EPS systems.
If the indicators come on and stay on, park your vehicle in a safe 
place, turn off and turn on the pow er system, then repeat the above 
operation.
If the indicators still come on and stay on, immediately have your 
vehicle inspected by an authorized Honda Clarity Electric dealer.
18 CLARITY ELECTRIC CSS-31TRV6100.book  520 ページ  2018年2月5日 月曜日 午後12時0分