2018 FORD FUSION ENERGI stop start

[x] Cancel search: stop start

Page 99 of 538

FORD FUSION ENERGI 2018  Owners Manual Stability Control
Flashes when the system isactive. If it stays lit or does notlight when you switch on theignition, this indicates a malfunction.During a malfunction the system willswitch off. Have a

Page 111 of 538

FORD FUSION ENERGI 2018  Owners Manual Airbag
ActionMessage
The system detects a malfunction due to a blocked sensor.Remove blockage.Occupant SensorBLOCKED RemoveObjects Near PassengerSeat
Alarm
ActionMessage
Alarm triggered due to unautho

Page 115 of 538

FORD FUSION ENERGI 2018  Owners Manual Hill Start Assist
ActionMessage
Hill start assist is not available. Contact an authorized dealer.See Hill Start Assist (page 182).Hill Start Assist NotAvailable
Keys and Intelligent Access
ActionMessa

Page 119 of 538

FORD FUSION ENERGI 2018  Owners Manual Power Steering
ActionMessage
The power steering system has detected a condition thatrequires service. See an authorized dealer.Steering Fault ServiceNow
The power steering system is not working.  Stop

Page 148 of 538

FORD FUSION ENERGI 2018  Owners Manual GENERAL INFORMATION
WARNINGS
Extended idling at high enginespeeds can produce very hightemperatures in the engine andexhaust system, creating the risk of fire orother damage.
Do not park, idle or driv

Page 149 of 538

FORD FUSION ENERGI 2018  Owners Manual STARTING A GASOLINE
ENGINE
When you start the engine, the idle speedincreases.  This helps to warm up theengine.  If the engine idle speed does notslow down automatically, have yourvehicle checked by

Page 150 of 538

FORD FUSION ENERGI 2018  Owners Manual Fast Restart
The fast restart feature allows you torestart your vehicle within 20 seconds ofswitching it off, even if it does not detecta valid passive key.
Within 20 seconds of switching the engineof

Page 151 of 538

FORD FUSION ENERGI 2018  Owners Manual 1.Shift into neutral and use the brakes tobring your vehicle to a safe stop.
2. When your vehicle has stopped, shiftinto park (P).
3. Apply the parking brake.
4.Press and hold the push button ignition