2018 FIAT 500 fuel type

KNOWING YOUR CAR
54
REFUELLING THE
VEHICLE
21) 29)
PETROL AND DIESEL
VERSIONS
fig. 54
Opening tank cap
❒ open the flap A;
❒ turn the ignition key anticlockwise in
the lock and unscrew the cap B;
❒ during refuelling, the cap should be
positioned as illustrated.
54DVDF0S033c
Petrol engines
Use only unleaded gasoline with a
number of octanes not lower than
95 R.O.N. (EN228 specification).
Diesel engines
Use only diesel for motor vehicles
(EN590 specification).
LPG VERSIONS
LPG filler
The LPG filler is placed next to the
petrol filler plug.
It has a “non return”, located in the filler
body itself.
55DVDF0S034c
To access the filler, open the access
flap A-fig. 55 and undo the cap B.
Observe the following precautions
during the refuelling operation:
❒ stop the engine;
❒ apply the handbrake;
❒ turn the ignition key to STOP;
❒ do not smoke;
❒ hand the special adapter over to the
qualified LPG refuelling personnel.
IMPORTANT Before refuelling with
LPG, the qualified personnel should
make sure that the adaptor is correctly
tightened onto the filler fitting.
IMPORTANT Depending on the
country, there are different types of
adapters for refuelling pumps.
The adapter C-fig. 56 that comes with
the car in a special case is specifically
designed for the country in which the
car is sold.

55
If you are in a different country, find out
what type of adapter is used there.
IMPORTANT Only use LPG for motor
vehicles.
IMPORTANT Look after the LPG
adaptor carefully so that it does not get
damaged.
Fuel - Vehicle
compatibility
identification Graphic
symbol for consumer
information in
accordance with
EN16942
The symbols shown below facilitated
recognising the correct fuel type to be
used on your car.
56DVDF0S035c
Before proceeding with refuelling,
check the symbols inside the fuel filler
flap (where provided) and compare
them with the symbols shown on the
fuel pump (where provided).
Symbols for petrol powered cars
E5: Unleaded petrol containing up to
2.7% (m/m) oxygen and with
maximum 5.0% (V/V) ethanol
compliant with
EN228
E10: Unleaded petrol containing up to
3.7% (m/m) oxygen and with
maximum 10.0% (V/V) ethanol
compliant with
EN228
E5E10
Symbols for diesel powered cars
B7: Diesel containing up to 7% (V/V) of
FAME (Fatty Acid Methyl Esters)
compliant with EN590
B10: Diesel containing up to 10% (V/V)
of FAME (Fatty Acid Methyl Esters)
compliant with EN16734
Symbols for petrol - LPG bi-fuel
cars
E5: Unleaded petrol containing up to
2.7% (m/m) oxygen and with
maximum 5.0% (V/V) ethanol
compliant with EN228
E10:Unleaded petrol containing up to
3.7% (m/m) oxygen and with
maximum 10.0% (V/V) ethanol
compliant with EN228
LPG:Automotive LPG compliant with
EN589
B7B10
LPGE5E10

VERSION WITH LPG
SYSTEM
45) 29)
INTRODUCTION
The LPG version features two fuel
supply systems: one for petrol and one
for LPG.
Like the petrol system, the LPG system
is timed, sequential multipoint type with
special injectors.
PASSIVE SAFETY/ACTIVE
SAFETY
Passive safety
The car has the same passive safety
specifications as other versions. In
particular, the tank mountings (located
in the spare wheel housing) have been
designed to exceed the Fiat safety
standards for impact tests.
Active safety
The car has the same active safety
specifications as other versions.
Although the LPG system has
numerous safety features, it is
advisable to proceed as follows every
time the car is not in use for a long
period or moved in an emergency as a
result of a breakdown or accident:
❒ unscrew the fixing devices
A - fig. 57, then remove the cover B;
57DVDF0S036c
❒ close the LPG cock by rotating the
knurled ring nut C-fig. 58 clockwise;
❒ refit the cover and tighten the
fastening devices again.
58DVDF0S037c
KNOWING YOUR CAR
56

IN AN EMERGENCY
128
BUMP STARTING13)
Never bump start the engine by
pushing, towing or driving downhill.
This could cause fuel to flow into the
catalytic converter and damage it
beyond repair.
IMPORTANT Remember that the
brake servo and electrical power
steering system (where provided) are
not operational until the engine is
started, a greater effort will therefore
be required to press the brake pedal
or turn the steering wheel.
CHANGING A
WHEEL 32) 30)
JACK
Please note that:
❒ the jack weighs 1.76 kg;
❒ the jack requires no adjustment;
❒ the jack cannot be repaired; if it
breaks, it must be replaced with a
new one of the same type;
❒ no tool other than its cranking
device may be fitted on the jack.
SERVICING
❒ prevent any dirt from depositing on
the “worm screw”
❒ keep the “worm screw” lubricated
❒ never modify the jack.
CONDITIONS OF NON-
USE
❒ at temperatures lower than -40°C
on a sandy or muddy ground
❒ on uneven ground
❒ on a road with steep gradient
❒ in extreme weather conditions:
thunderstorms, typhoons,
hurricanes, blizzards, storms, etc.
❒ in direct contact with the engine or
to carry out repairs under the
vehicle
❒ on boats.
RAISING WITH A JACK
AND REPLACING A
WHEEL
To change a wheel, proceed as
follows:
❒ Stop the car in a position that is
not dangerous for oncoming traffic
where you can change the wheel
safely. The ground must be flat and
sufficiently compact.
❒ Turn the engine off and pull up the
handbrake.
❒ Engage first gear or reverse.
❒ Lift up the luggage compartment
mat and loosen the central locking
device A - fig. 99.
❒ Take out the tool container
B and take it near to the wheel to
be changed.
❒ Take the space-saver wheel C.

TECHNICAL DATA
180
CAPACITIES21) 38) 11) 22) 3)
Fuel tank (litres): 35 35 35 35
Including a reserve of (litres): 5 5 5 5
Engine cooling system 4.85/
(litres): 5.2 5.3 5.2 4.4
Engine sump (litres): 2.8  2.8  2.5  2.75 
Engine sump and filter (litres): 3.2  3.2  2.8  2.90 
Gearbox/differential casing (litres): 1.65 1.65 1.65 1.65
Dualogic gearbox hydraulic
activation system (litres/kg): – 0.7/0.59 0.7/0.59 0.7/0.59

Hydraulic brake circuit (kg): 0.55 0.55 0.55 0.55
Hydraulic clutch controls
(RH drive versions): – – 0.100 0.100
Windscreen and rear window
washer fluid reservoir (litres): 2.5 2.5 2.5 2.5
* For versions/markets, where provided
** When the vehicle is used in particularly harsh weather conditions, we recommend using a 60% mixture of PARAFLUUPand 40% of
demineralised water.
LPG versions
Petrol versions
0.9
TwinAir
60 HP
*65 HP
0.9
TwinAir
80 HP
*85 HP
105 HP
1.2 8V
69 HP1.4 16V
100 HP*Prescribed fuels and
original lubricants
Unleaded petrol with R.O.N.
no lower than 95 (EN 228 specifications)
Mixture of distilled water and
PARAFLU
UPat 50% (**)
SELENIA K P.E.

SELENIA DIGITEK P.E. SELENIA MULTIPOWER GAS 5W-40 
TUTELA GEAR FORCE
TUTELA CS SPEED
Special oil with
“ATF DEXRON III” type additive
TUTELA TOP 4 or TUTELA TOP 4/S
Mixture of water and
PETRONAS DURANCE SC35

TECHNICAL DATA
184
FUEL CONSUMPTION - CO2 EMISSIONS
The fuel consumption figures given in the table are determined on the basis of the type-approval tests laid down by specific
European Directives.
CO2SEMISSIONS AND CONSUMPTION ACCORDING TO THE EUROPEAN
DIRECTIVE IN FORCE
0.9 TwinAir 60 HP Start&Stop* 4.6 3.4 3.8 88
0.9 TwinAir 65 HP Start&Stop 5.2 3.5 4.1 96
0.9 TwinAir 80 HP Start&Stop* 4.5 3.4 3.8 88
0.9 TwinAir 80 HP Dualogic 4.4 3.4 3.8 88
0.9 TwinAir 85 HP Start&Stop 4.6 3.4 3.8 90
0.9 TwinAir 85 HP Dualogic 4.3 3.5 3.8 88
0.9 TwinAir 105 HP Start&Stop 5.5 3.5 4.2 99
1.2 8V 69 HP 6.2 4.2 4.9 115
1.2 8V 69 HP Start&Stop 5.5 4.3 4.7 110
1.2 8V 69 HP Dualogic 6.0 4.1 4.8 111
1.2 8V 69 HP Dualogic Start&Stop 5.4 4.0 4.5 105
1.2 8V 69 HP LPG 6.3 (**) / 8.1 (***) 4.3 (**) / 5.5 (***) 5.0 (**) / 6.5 (***) 117 (**) / 104 (***)
1.2 8V 69 HP EVO2 S&S 4.8 4.0 4.3 99
1.4 16V 100 HP* 7.7 5.1 6.1 140
1.4 16V 100 HP Dualogic* 7.1 5.0 5.8 135
1.4 16V 100 HP Dualogic Start&Stop* 6.7 5.0 5.6 130
1.3 16V Multijet 95 HP Start&Stop EURO 5 4.6 3.0 3.6 95
1.3 16V 78 HP / 95 HP EURO 6 4.1 3.0 3.4 89
VersionsUrban
litres/100 kmExtra-urban
litres/100 kmCombined
litres/100 kmCO2emissions g/km
*For versions/markets, where provided (**) Petrol (***) LPG
The fuel consumptions reported in the table refer to the AUTO-ECO logic for 1.2 8V Dualogic and AUTO for 1.4 16V Dualogic
The CO
2emission figures in the table below refer to combined fuel consumption.

191
21) VEHICLE REFUELLING
•Do not bring naked flames or lit cigarettes near to the fuel tank
opening: fire risk. Keep your face away from the fuel filler to
prevent breathing in harmful vapours.
•During normal service the catalyst reaches high temperatures;
therefore do not park the car over inflammable materials (grass,
dry leaves, pine needles, etc.): fire hazard.
•Do not use a mobile phone near the refuelling pump: risk of fire.
22) SEAT BELTS - PRETENSIONERS
•Do not press the seat belt release button while the vehicle is
moving.
•Remember that in the event of an accident, the rear seat
passengers not wearing seat belts are exposed to a very serious
risk and also represent a serious danger for the front seat
occupants.
•The pretensioner may be used only once. Contact a Fiat
Dealership to have it replaced after it has been deployed.
•For maximum safety, keep the backrest upright, lean back into
it and make sure the seat belt fits closely across your chest and
pelvis. Always fasten the seat belts on both the front and the rear
seats.
•Travelling without wearing seat belts will increase the risk of
serious injury and even death in the event of an accident.
•Removing or tampering with seat belt and pretensioner
components is strictly prohibited. Any intervention on these
components must be performed by qualified and authorised
technicians. Always go to a Fiat Dealership.
(CONTINUES)
PERSONAL SAFETY
(CONTINUED)
19) START&STOP SYSTEM
•When replacing the battery, always go to a Fiat Dealership.
Replace the battery with one of the same type (HEAVY DUTY)
and with the same specifications.
•Before opening the bonnet, make sure that the vehicle is
switched off and the key is in the STOP position.
Please follow the instructions on the decal near the front
crossmember. It is advisable to extract the key when there are
other people in the car.
The car should always be left after the key has been removed
or turned to the STOP position. When refuelling, make sure
that the car is switched off with the key in the STOP position.
•For cars with Dualogic gearbox, if the engine is
automatically stopped on a slope, the engine should be
restarted by moving the gear lever
to + or – without –releasing the brake pedal.
For vehicles with Dualogic transmission, where the Hill Holder
function is present, in case of stop downhill the motor does
not cut off automatically, so as to make the Hill Holder
function - which is active only when the engine is running -
available.
•If climate comfort is to be favoured, the Start&Stop system
can be disabled, for a continuous operation of the climate
control system.
20) ACCESSORIES PURCHASED BY THE OWNER
Take care when fitting additional spoilers, alloy wheels or non-
standard wheel hubs: they could reduce the ventilation of the
brakes and affect efficiency under sharp, repeated braking or
on long descents. Make sure that nothing obstructs the pedal
stroke (mats, etc.).

203
•Never use alcohol, petrol, chemical products, detergents,
stain removers, wax, solvents and “wash and polish” products.
•Rinse immediate to remove soap to prevent stains. Repeat
the operation if needed.
•Rinse immediately, and repeat this operation if necessary.
If you choose to waterproof the soft top, strictly follow the
instructions on the package of the waterproofing product you
have selected in order to obtain optimal results.
•The rubber seals on the soft top must be cleaned exclusively
with water. If you notice that this trim is dry or is sticking, apply
talcum powder or products specifically for rubber trim (silicone
spray).
7) ROOF RACK/SKI RACK
The use of transversal bars on longitudinal ones prevents the
use of the sunroof, because the latter, while opening, interferes
with the bars. Therefore do not move the sunroof if transversal
bars have been fitted.
8) EOBD SYSTEM
If, when the ignition key is turned to the MAR position, the
Uwarning light either does not come on or, when driving, it
comes on constantly or flashing (along with a message in the
display, for versions/markets, where provided) contact a Fiat
Dealership as soon as possible. The operation of the
Uwarning light may be checked by traffic police using appropriate
equipment. Comply with the laws and regulations of the country
where you are driving.
9) DOORS
Make sure to take the key with you once a door or the tailgate
is locked, to prevent locking the same key inside the vehicle.
If the key has been locked in, it can only be recovered using
the second provided key.10) MULTIMEDIA
• Only clean the front panel and the display lens with a soft,
clean, dry, anti-static cloth.
Cleaning and polishing products may damage the surface. Never
use alcohol, petrols and derivatives.
• Do not use the display as a base for supports with suction pads
or adhesives for external navigators or smartphones or similar
devices
11) REFUELLING YOUR DIESEL ENGINE VEHICLE
Vehicles with a diesel engine must only be filled with diesel fuel for
motor vehicles, in compliance with European Standard EN 590.
The use of other products or mixtures may damage the engine
beyond repair and consequently invalidate the warranty, due to
the damage caused. If you accidentally introduce other types of
fuel into the tank, do not start the engine. Empty the tank. If the
engine has been run for even an extremely limited amount of time,
you must not only drain the fuel tank, but the rest of the supply
circuit as well.
12) SEAT BELTS - PRETENSIONERS
Operations which lead to impacts, vibrations or localised heating
(over 100°C for a maximum of six hours) in the area around the
pretensioner may damage or deploy it. Contact a Fiat Dealership
should intervention be necessary on these components.
13) STARTING AND STOPPING THE ENGINE
• It is advisable not to demand maximum performance from your
car (e.g. excessive accelerations, long distances at top rpm,
excessive intense braking, etc.) as soon as the engine is started.
• When the engine is switched off never leave the key turned to
MAR to prevent useless current absorption from draining the
battery.
VEHICLE SAFETY
(CONTINUES) (CONTINUED)