2018 FIAT 500 engine

SERVICING AND CARE
158
ENGINE COOLANT
39) 22) 23)
The coolant level must be checked
when the engine is cold and must
range between the
MIN and MAX marks on the reservoir.
A 50-50 mixture of PARAFLU
UPand
distilled water gives freeze protection
up to –35°C.
When the vehicle is used in particularly
harsh weather conditions, we
recommend using a 60% mixture of
PARAFLU
UPand 40% of demineralised
water.
CHECKING LEVELS
ENGINE OIL
39) 22) 26) 4)
Check the engine oil level a few
minutes (about five) after the engine
has stopped, with the car parked on
level ground.
The oil level must be within the MIN
and MAX marks on the dipstick.
NOTE
The dipstick is integrated in the engine
oil cap for 0.9 TwinAir 60 HP*, 65 HP,
80 HP*, 85 HP and 105 HP versions.
❒ The range between the MIN and
MAX marks corresponds to about 1
litre of oil.
❒ If the level of the oil is close to or
below the MIN mark, add oil via the
filler fitting until the MAX mark is
reached.
❒ The oil level must never exceed the
MAX mark.
❒ The maximum engine oil
consumption is usually 400 grams
every 1000 km.
* For versions/markets, where provided
WINDSCREEN/REAR
WINDOW WASHER
FLUID
39) 22)
Use a mixture of water and
PETRONAS DURANCE
SC35 fluid, in the following
concentrations:
❒ 30% PETRONAS DURANCE
SC35 and 70% water in summer.
❒ 50% PETRONAS DURANCE
SC35 and 50% water in winter.
BRAKE FLUID 39) 22)
The fluid level in the reservoir must not
exceed the MAX mark.
IMPORTANT Brake fluid is
hygroscopic (i.e. it absorbs moisture).
For this reason, if the vehicle is mainly
used in areas with a high degree of
atmospheric humidity, the fluid should
be replaced at more frequent intervals
than specified in the
“Scheduled Servicing Plan”.

165
TECHNICAL DATA
IDENTIFICATION
DATA
VIN PLATE
The plate can be found on the left side
of the boot floor and it bears the
following identification data fig. 148:
A Name of Manufacturer
B Type-approval number.
C Vehicle type identification code.
D Chassis manufacture number.
E Maximum authorised weight of
vehicle when fully laden plus trailer.F Maximum authorised weight of
vehicle when fully laden plus trailer.
G Maximum authorised weight on first
axle (front).
H Maximum authorised weight on
second axle (rear).
I Engine type.
L Bodywork version code.
M Spare part number.
N Smoke opacity index (for diesel
engines).
148DVDF0S0209c
BODY PAINTWORK
IDENTIFICATION PLATE
This can be found on the external rear
door pillar (left-hand side) and it bears
the following information fig. 149:
A Paint manufacturer.
B Colour name.
C Fiat colour code.
D Respray and touch up code.
149DVDF0S0134c

TECHNICAL DATA
166
CHASSIS MARKING
The plate can be found on the right side
of the boot floor and it bears the
following identification data fig. 150:
❒ vehicle model;
❒ the chassis progressive number.
150DVDF0S0135c
ENGINE MARKING
It is stamped on the cylinder block and
includes the type and the engine serial
number.

167
ENGINE
GENERAL0.9TwinAir 65 HP0.9TwinAir 85 HP0.9TwinAir 105 HP
Engine code 312A4000 312A2000 199B6000
Cycle Otto Otto Otto
Number and position of cylinders 2 straight 2 straight 2 straight
Piston diameter and stroke (mm) 83.5 x 88 80.5 x 86.0 80.5 x 86.0
Total capacity (cm3
) 964 875 875
Compression ratio 11.1 : 1 10 ± 02 : 1 10 ± 02 : 1
Maximum power (EEC) (kW) 48 62.5 77 (*) 72 (**)
Maximum power (EEC) (HP) 65 85 105 (*) 98 (**)
corresponding engine speed (rpm) 6250 5500 5500 (*) 5500 (**)
Maximum torque (EEC) (Nm) 88 145 145 (*) 120 (**)
Maximum torque (EEC) (kgm) 8.9 14.8 14.8 (*) 12.2 (**)
corresponding engine speed (rpm) 3500 1900 2000 (*) 1750 (**)
Spark plugs NGK LKR7DI-12 NGK LKR9EI-8 NGK ILKR9G8
Fuel
95 RON unleaded petrol
(EN228 specifications)95 RON unleaded petrol
(EN228 specifications)
(*) SPORT mode
(**) NORMAL mode

TECHNICAL DATA
168
GENERAL0.9TwinAir 60 HP (*)0.9TwinAir 80 HP (*)
Engine code 312A6000 312A5000
Cycle Otto Otto
Number of cylinders and position 2 straight 2 straight
Piston diameter and stroke (mm) 83.5 x 88 83.5 x 88
Total capacity (cm3
) 964 875
Compression ratio 11.1 : 1 10 ± 02 : 1
Maximum power (EEC) (kW) 44 59
Maximum power (EEC) (HP) 60 80
corresponding engine speed (rpm) 6250 5500
Maximum torque (EEC) (Nm) 88 145
Maximum torque (EEC) (kgm) 8.9 14.8
corresponding engine speed (rpm) 3500 1900
Spark plugs NGK T20182U NGK LKR9CI-8 oppure NGK PLKR9C8
Fuel
95 RON unleaded petrol
(EN228 specifications)95 RON unleaded petrol
(EN228 specifications)
(*) For versions/markets, where provided

169
GENERAL1.2 8V 69 HP LPG1.2 8V 69 HP1.2 8V 69 HP
EVO2 S&S 1.4 16V 100 HP (*)
Engine code 169A4000 169A4000 169A400 169A3000
Cycle Otto Otto Otto Otto
Number and position of cylinders 4 straight 4 straight 4 straight 4 straight
Piston diameter and stroke (mm) 70.8 x 78.86 70.8 x 78.86 70.8 x 78.86 72 x 84
Total capacity (cm3
) 1242 1242 1242 1368
Compression ratio 11.1 : 1 11.1 : 1 11.1 : 1 10.8 : 1
Maximum power (EEC) (kW) 51 51 51 73,5
Maximum power (EEC) (HP) 69 69 69 100
corresponding engine speed (rpm) 5500 5500 5500 6000
Maximum torque (EEC) (Nm) 102 102 102 131
Maximum torque (EEC) (kgm) 10.4 10.4 10.4 13.4
corresponding engine speed (rpm) 3000 3000 3000 4250
Spark plugs NGK ZKR7AI-8 NGK ZKR7A-10 NGK DCPR7EN-10 NGK DCPR7EN-10
Champion RA8MC x 4
Fuel LPG
95 RON
unleaded petrol
(EN228
specifications)95 RON
unleaded petrol
(EN228
specifications)95 RON
unleaded petrol
(EN228
specifications)
(*) For versions/markets, where provided

TECHNICAL DATA
170
GENERAL1.3 16V
Multijet 95 HP
EURO 51.3 16V
Multijet 95 HP
EURO 61.3 16V
Multijet 78 HP
EURO 6
Engine code 199B1000 312B1000 312B5000
Cycle Diesel Diesel Diesel
Number and position of cylinders 4 straight 4 straight 4 straight
Piston diameter and stroke (mm) 69.6 x 82 69.6 x 82 69.6 x 82
Total capacity (cm3
) 1248 1248 1248
Compression ratio 16.8 : 1 16.8 : 1 16.8 : 1
Maximum power (EEC) (kW) 70 70 57.3
Maximum power (EEC) (HP) 95 95 78
corresponding engine speed (rpm) 4000 4000 3750
Maximum torque (EEC) (Nm) 200 200 200
Maximum torque (EEC) (kgm) 20.4 20.4 20.4
Corresponding engine speed (rpm) 1500 1500 1500
Fuel
Diesel for motor
vehicles
(EN590 specifications)Diesel for motor
vehicles
(EN590 specifications)Diesel for
motor vehicles
(EN590 specifications)
(*) For versions/markets, where provided

TECHNICAL DATA
180
CAPACITIES21) 38) 11) 22) 3)
Fuel tank (litres): 35 35 35 35
Including a reserve of (litres): 5 5 5 5
Engine cooling system 4.85/
(litres): 5.2 5.3 5.2 4.4
Engine sump (litres): 2.8  2.8  2.5  2.75 
Engine sump and filter (litres): 3.2  3.2  2.8  2.90 
Gearbox/differential casing (litres): 1.65 1.65 1.65 1.65
Dualogic gearbox hydraulic
activation system (litres/kg): – 0.7/0.59 0.7/0.59 0.7/0.59

Hydraulic brake circuit (kg): 0.55 0.55 0.55 0.55
Hydraulic clutch controls
(RH drive versions): – – 0.100 0.100
Windscreen and rear window
washer fluid reservoir (litres): 2.5 2.5 2.5 2.5
* For versions/markets, where provided
** When the vehicle is used in particularly harsh weather conditions, we recommend using a 60% mixture of PARAFLUUPand 40% of
demineralised water.
LPG versions
Petrol versions
0.9
TwinAir
60 HP
*65 HP
0.9
TwinAir
80 HP
*85 HP
105 HP
1.2 8V
69 HP1.4 16V
100 HP*Prescribed fuels and
original lubricants
Unleaded petrol with R.O.N.
no lower than 95 (EN 228 specifications)
Mixture of distilled water and
PARAFLU
UPat 50% (**)
SELENIA K P.E.

SELENIA DIGITEK P.E. SELENIA MULTIPOWER GAS 5W-40 
TUTELA GEAR FORCE
TUTELA CS SPEED
Special oil with
“ATF DEXRON III” type additive
TUTELA TOP 4 or TUTELA TOP 4/S
Mixture of water and
PETRONAS DURANCE SC35