2018 CITROEN DS3 display

35
For safety reasons, the vehicle must be
stationary before the driver per forms any
operations that require close attention.
Some functions can only be viewed with
the vehicle stationary. Their display is
interrupted once the vehicle starts moving
again.
General operation
Recommendations Principles
Press the "
MENU" button for access to the
different menus, then press the virtual buttons
in the touch screen tablet.
Each menu is displayed in one or two pages
(primary page and secondary page).
And, depending on equipment, it allows:
-
t
he display of visual parking sensors
information,
-

a

ccess to the internet ser vices and
navigation system controls and the display
of associated information.
It is necessary to press firmly, particularly for
"flick" gestures (scrolling through lists, moving
the map, etc.).
A light wipe is not enough.
The screen does not recognise pressing with
more than one finger.
This technology allows use at all temperatures
and when wearing gloves.
Do not use pointed objects on the touch screen
tablet.
Do not touch the touch screen tablet with wet
hands.
Use a

soft clean cloth to clean the touch screen
tablet. Use the "
Options" button to go to the
secondary page.
After a
few moments with no action on
the secondary page, the primary page is
displayed automatically.
Use this button to access additional
information and the settings for
certain functions.
Use this button to confirm.
Use this button to return to the
primary page or exit.
Menus
Press this button then choose the
desired menu.
Navigation .
Availability of the navigation
depends on the country of sale and/
or trim level.
Radio Media .
Settings .
Allows configuration of the display
and the system.
Connected services .
The availability of these ser vices
depends on the country of sale and/
or trim level.
Telephone .
01
Instruments

36
ButtonCorresponding function Comments
Diagnostic Summary of current alerts.


Under-inflation initialisation Reinitialisation of tyre pressures.
Vehicle settings Access to other functions with settings that can
be adjusted. The functions are grouped together
under three tabs:
-
"Driving assistance "
-

"
Automatic rear wiper in reverse" (Rear
wiper on with reverse gear).
-

"
Parking sensors" (Activation of the rear
parking sensors).
-

"
Auto emergency braking" (Active City
B r a ke).
-
"Lighting "
-

"
Mood lighting".
-
"

Guide-me-home lighting" (Automatic
guide-me-home lighting).
Select or deselect the tabs at the bottom of the
screen to display the functions required.
"Driving" menu
The functions available through this menu are
detailed in the table below.
Driving
.
Gives access to the trip computer and,
depending on version, allows settings
to be adjusted for certain functions.
1. Volume adjustment/mute.
01
Instruments

37
"Settings" menu
The functions available through this menu are
detailed in the table below.Button Corresponding function Comments
Audio settings Adjustment of volume, balance, etc.
Turn off screen Turns off the display in the the touch screen tablet (black screen).
Pressing the black screen (or the "MENU" button) restores the display.
System Settings Choice of units:
-
t

emperature (°Celsius or °Fahrenheit),
-

d
istances and fuel consumption (l/100 km, mpg or km/l).
Time/Date Date and time setting.
Languages Choice of display language from a
defined list.
Screen settings Adjustment of the display parameters (text scrolling, animations, etc.) and screen brightness.
Calculator Display the calculator.
Calendar Display the calendar.
01
Instruments

38
Trip computer
System that gives you information about the
current journey (range, fuel consumption, etc.).
With monochrome screen A
Display of information
F Press the button located at the end of the wiper control stalk , to display the various
trip computer data.
The trip computer information is the following:
-


range, -

c
urrent fuel consumption,
-
S
top & Start time counter,
-
d
istance travelled,
-
a
verage fuel consumption,
-
a
verage speed.
F

T
he next press then returns you to the
normal display.
Reset
F Press this control for more than two seconds to reset to zero the distance
travelled, the average fuel consumption and
the average speed.
With monochrome screen C
Display of information
F Press the button, located at the end of the wiper control stalk, to display the various
trip computer tabs in succession.
01
Instruments

39
Reset trip
With touch screen tablet
Display of information
- Current information showing:
• t he range,
•

t
he current fuel consumption,
•

t
he distance remaining or the
Stop & Start time counter.
-

T
rip "1" with:
•

t
he distance travelled,
•
t

he average fuel consumption,
•
t

he average speed,
for the first trip.
-

T
rip "2" with:
•

t
he distance travelled,
•
t

he average fuel consumption,
•
t

he average speed,
for the second trip.
F

T

he next press then returns you to the
normal display. F
W hen the required trip is displayed, press
the button on the end of the wiper control
stalk for more than two seconds.
Tr i p s " 1" and " 2" are independent but they are
used in the same way.
For example, trip 1
can be used for daily figures
and trip 2
for monthly figures.
F

P
ress the MENU button, then select
" Driving ", to display the different tabs.
F

S
elect the desired tab using your finger.
-

T
he "Current " or "Instantaneous " tab with:
•

t
he range,
•

t
he current fuel consumption,
•

t
he Stop & Start time counter. -
T he "
Tr i p 1 " tab with:
• t he distance travelled,
•
t

he average fuel consumption,
•
t

he average speed,
for the first trip.
-

T
he "Tr i p 2 " tab with:
•

t
he distance travelled,
•
t

he average fuel consumption,
•
t

he average speed,
for the second trip.
Reset trip
F When the desired trip is displayed, press the reset button.
Tr i p s " 1" and " 2" are independent but they are
used in the same way.
For example, trip 1
can be used for daily figures
and trip 2
for monthly figures.
01
Instruments

40
A few definitions
Range
(miles or km)
The distance which can still be
travelled with the fuel remaining
in the tank (at the average fuel
consumption seen over the last
distance travelled).
This value may fluctuate if a
change
of driving style or terrain results in
a

significant change in the current fuel
consumption.
When the range falls below around 20
miles
(30

km), dashes are displayed. After filling with
at least 5

litres of fuel, the range is recalculated
and is displayed if it exceeds around 60
miles
(10 0


k m).
If dashes instead of figures continue to be
displayed when driving, contact the dealer
network or a
qualified workshop.
Current fuel consumption
(mpg or km/l or l/100 km)
C alculated during the last few
seconds. This function is only displayed from
around 20 mph (30 km/h).
Average fuel consumption
(mpg or km/l or l/100 km)
C alculated since the last time the
trip recorder was reset to zero.
Average speed
(mph or km/h)
Calculated since the last time the
trip recorder was reset to zero.
Distance travelled
(miles or km)
Calculated since the last time the
trip recorder was reset to zero.
Distance remaining to travel
(miles or km)
This is the distance remaining to
travel before the final destination is
reached. It can be input by the user.
If the distance is not entered, dashes
are displayed instead of numbers.
Stop & Start time counter
(minutes/seconds or hours/minutes)
If your vehicle is fitted with Stop &
Start, a time counter adds up the
time spent in STOP mode during
a


j o u r n ey.
It is reset to zero every time the
ignition is switched on using the key.
Date and time adjustment
With monochrome screen A
F Press the MENU button.
F S elect "Display settings" using the buttons
" 5 " or " 6".
F

P
ress " OK" to confirm the selection.
F

S
elect the "Year" function using the buttons
" 5 " or " 6".
F

P
ress " OK" to confirm the selection.
F

D
efine the desired value using the buttons
" 7 " or " 8".
F

P
ress " OK" to confirm the selection.
F

R
estart the procedure for the settings
"Month", "Day", "Time", and "Minutes".
01
Instruments

41
With monochrome screen C
F Select the "Display configuration " menu.
F Sel ect the function " Date and time
adjustment " using the buttons " 5" or " 6".
F

P
ress " OK" to confirm the selection.
F

A
djust the settings one by one using the " 7"
or " 8" buttons then confirm with the " OK"
button.
F

T
hen select the " OK" box on the screen and
confirm.
With touch screen tablet
F Select the " Settings" menu.
F
I
n the secondary page, press on " Time/
Date ". F

Sel
ect "
Adjust time" or " Adjust date". When setting the time, you can select
"
Satellite synchronisation ", so that the
minutes are adjusted automatically by
satellite reception.
F
M
odify the settings using the numeric
keyboard and confirm.
F P ress "Confirm " to save and quit.
01
Instruments

73
For your convenience, the settings are
stored between two starts of the vehicle.
When the engine is cold, the air flow will
only reach its optimum level gradually
to prevent too much cold air being
distributed.
Temperature adjustment
The value shown on the display is a level of
c omfort, not a temperature in degrees Celsius
or Fahrenheit.
Press the 5
and 6 buttons to
change this value. A setting of
around 21


provides optimum
comfort. Nonetheless, depending
on your needs, a setting between
18
and 24 is typical.
This system is designed to operate effectively
in all seasons, with the windows closed.
On entering the vehicle, if the interior is
very cold or very warm, there is no need
to change the value displayed in order to
obtain the comfort required. The system
compensates automatically and corrects
the temperature difference as quickly as
possible.
Automatic visibility programme
For more information on Front demist -
defrost , refer to the corresponding section.
Manual control
It is possible to manually adjust one or more
functions, while keeping the other functions in
automatic mode.
The AUTO symbol goes off.
To return to automatic mode, press the AUTO
button.
Switching to manual mode may result in
some discomfort (temperature, humidity,
odour, misting) and is not optimal for
comfort.
For maximum cooling or heating of the
passenger compartment, it is possible
to exceed the minimum value 14
or the
maximum value 28.
F

P
ress the blue button until " LO" is
displayed or the red button 2 until " HI"
is displayed.
Air conditioning On/Off
Pressing this button stops the air
conditioning.
Switching off may affect comfort levels
(humidity, misting).
Pressing again returns to automatic operation
of the air conditioning. The A/C symbol is
displayed.
Air intake/Air recirculation
For more information on Recirculation of
interior air , refer to the corresponding section.
Air distribution adjustment
Press this button successively
to direct the air flow alternatively
towards:
-

w

indscreen and side windows (demisting or
def r o st ing),
-

w

indscreen, side windows and air vents,
-

w

indscreen, side windows, air vents and
footwells,
-
w

indscreen, side windows and footwells,
-


footwells,
-

a

ir vents and footwells,
-

a

ir vents.
03
Ease of use and comfort