2018 AUDI TT ROADSTER oil

Check ing and F illing
time. An authorized Audi dealer has instruc­
tions about how to measure oil consump ­
tion acc urately.
- You can find information on engine oi l and
engine oil capacities for the USA at
www.audiusa.com/help/maintenance, or
for Canada at www.audi.ca/ca/web/en/
cus tomer-area/ ca re-a nd-mai n tena nee/ aud i­
se rvice -sched ules . html, or call
800-822-2834 .
Adding engine oil
Fig. 18 2 Eng ine co mpa rtmen t: e ngin e o il fille r open ing
cove r
Obse rve the safety p recaut ions ¢&. in Working
in the engin e comportment on page 233 .
"'Turn the eng ine off.
"' Open the hood ¢ page 235.
"'Unscrew the cap~ for the eng ine o il filler
opening
¢ fig. 182.
"'Carefu lly add 0.5 quart (0 .5 liter) of the correct
oi l
¢pag e 236.
"'Check the oil leve l again after two minutes
¢ page 23 7, Checking the engine oil level.
"' Add a smaller amount of engine o il if necessa­
ry . T he
marking @Qpage 237, fig . 181 must
not be exceeded
¢ QJ) in Checking the engine oil
level on page 237.
"' Close the engine oil fille r cap and p ush the dip ­
stick a ll the way in .
"' Close the hood .
A WARNING
-When adding oi l, do not let oil d rip onto hot
engine components. T his increases the r isk
of a fire .
238
-You must sea l the cap on the oi l filler open ­
ing correct ly so that oi l does not leak out
onto the hot eng ine and exhaust system
when the engine is running, because this is a fire hazard .
- Always clean sk in thoroughly if it comes i nto
contact with eng ine oil.
- Engine oil is poisonous and must be kept
out of reac h of children .
- Store the engine o il secure ly in the origina l
container.
@ Note
- Your Limited New Vehicle Warranty does
not cover damage or ma lfunctions due to
failure to fo llow recommended mainte­
nance and use req uirements as set fort h in
the A udi Owner's Manual and Warranty
&
Ma intenance bookle t.
- Use on ly a high quality e ngine o il that ex­
press ly complies with the A ud i oi l quality
standard spec ified fo r you r vehicle 's eng ine .
Us ing any othe r o il can cause ser io us eng ine
damage .
- Do not mix a ny add it io na l lubr icants into
the engine oil. Damage ca u sed by such add i­
t ives is no t covere d by the w arra nty.
@ For the sake of the environment
- Oil sho uld neve r enter the sewer system or
c ome into con ta ct w ith the g round.
- Pay attent ion to lega l req uiremen ts when
disposing of empty o il conta iners.
Changing the engine oil
We recommend that have your oil changed by an
authorized Audi dealer or a qualified service sta­ tion.
Before you check anything in the engine compart ­
ment,
always r ead and heed all WARNINGS Q .&.
in Working in the engine compartment on
page 233.
The eng ine o il must be changed according to the
i nterva ls spec ified in your Warranty
& Ma inte­
nance boo klet . This is ve ry importa nt because the
.,..

Cl 00 .-< N r-­N .-< 0 r-­Vl 00
lubricating properties of oil diminish gradually
during normal vehicle use.
Unde r some c ircu mstances the eng ine o il should
be changed more frequently . Change oil mo re of­
ten if you drive most ly short distances, ope rate
the vehicle in dusty areas or under predominant ly
stop-and -go traffic condit ions, or have your vehi­
cle where temperatures remain below free zing
for extended periods.
Detergent additives in the oil will make fresh oil
l ook dark after the engine has been running for a
short time. Th is is normal and is not a reason to
change the oil more often than recommended.
Because of the problem of proper disposa l, along
with the special tools and necessary expertise re­
qu ired, we strongly recommend that you have
your oil changed by an authorized
A ud i de ale r or
a qualified service station .
If you c hoo se to change your o il y our self , please
note the following important information:
A WARNING
To reduce the risk of personal injury if you
must change the engine oil in your veh icle
yourself:
- Wear eye protection .
- To reduce the risk of burns from hot engine oil, let the eng ine cool down to the touch.
-
- When removing the o il drain plug with your
fingers, stay as far away as poss ible. A lways
keep your forearm paralle l to the ground to
help prevent hot o il from runn ing down your
arm .
- Drai n the oil into a container designed for
this pu rpose, one large enough to hold at
least the total amount of oil in your e ng ine .
- Engine oil is poisonous . Keep it well out of
the reach of ch ild ren .
- Cont inuous contact w ith used eng ine oi l is
harmful to your sk in. A lways protect your
sk in by washing oil off thoroug hly w ith soap
and water.
@ Note
Never mix oil addit ives with your engine o il.
These additives ca n damage your eng ine and
Ch eck ing and F illing
adverse ly affect yo ur Audi Limited New Vehi­
cle Warranty.
@ For the sake of the environment
- Before chang ing yo ur oil, first make sure
you know where you can proper ly d ispose o f
the used oi l.
- Always dispose of used engine o il properly.
Do not dump it on garden soil, wooded
areas, into open streams or down sewage
drains.
- Recycle used engine oi l by taking it to a used
engine oi l collection faci lity in you r area, or
contact a service station .
Cooling system
Coolant
The eng ine cooling system is fi lled w it h a m ixtu re
of purified water and coo lant additive at the fac ­
tory . This coolant must not be not c hanged.
T he coo lant level is mo nitored th ro ugh
the . in­
dicator light
<:!) page 12. However, we do recom­
mend occasionally checking the coolant leve l
manua lly.
If you must add coolant, use a mixture of wate r
and coolant additive . Mix ing t he coo lant add it ive
with dis tilled water is recommended.
Coolant additive
T he coolant add itive is made of anti-free zing and
cor rosion protect ion agents. On ly use the follow­
i ng coolant additives . These add itives may be
mixed wi th ea ch o the r.
Coolant additive Specification
G 13 TL 774 J
G12++ TL 774 G
The amount of coolant additive that needs to be
mixed with water depends on the cl imate where
the vehicle w ill be oper ated. If the coo lant add i­
t ive percentage is too low, the coolant can freeze
and damage the eng ine .
.,.
239

Checking and Filling
Coolant Freeze protec-
tion
additi ve
Warm min. 40% min. -13 °F
regions (- 25 °C)
max . 45%
Cold min. 50% max. -40 °F
regions (-40 °C)
max. 55%
@ Note
- Before the start of winter, have an author­ ized Audi dealer or authorized Audi Service
Facility check if the coolant additive in your
vehicle matches the percentage appropriate
for the climate. Th is is especially important
when driving in co lder climates.
- If the appropriate coolant additive is not
available in an emergency, do not add any
other additive . You cou ld damage the en­
gine.
If t his happens, only use wate r and re­
store the correct mixture ratio with the
specified coolant additive as soon as possi­
ble .
- Only refill with new coo lant.
- Radiato r sealant must not be mixed w ith
the coo lant .
Adding coolant
Fig . 183 Eng ine co mpartment : coo lant expans ion ta nk
cove r (exa mple)
Observe the safety precautions c:::> page 233 ,
Working in the engine compar tment.
Che cking the engin e coolant l evel
.. Park the vehicle on a level surface .
.. Switch the ignition off .
240
~ 0 > 00 ID
.. Read the coolant level on the coolant expansion
tank
c:::> page 236, fig. 180 . The coolant level
must be between the markings when the en­
gine in cold. When the engine is warm it can be
slightly above the upper mark ing .
Adding coo lant
Requirement : there must be a residual amount of
coolant in the expansion tank
c:::> @ .
.. Let the engine cool down.
.. Place a clot h over the coolant expansion tank
cap and unscrew the cap counterclockwise
c:::> ,A .
.. Add coo lant mixed in the correct rat io
c:::> page 239 up to the upper marking .
.. Make sure that the fluid level remains stable.
Add more coolant if necessary .
.. Close the cap securely .
Coolant loss usually ind icates there is a leak. Im­
mediate ly dr ive your vehicle to a n author ized
Audi dealer or author ized Audi Service Fac il ity
and have the cooling system inspected. If the
cooling system is not lea king , a loss can come
from the coolant boiling through overheat ing
and being pushed ou t of the cooling system .
Lil WARNING
- The cooling system is under pressure. Do
not open the coo lant expansion tank cap
when the engine is hot. This increases the risk of burns.
-The coolant additive and the coolant can be dangerous to your health. For this reason ,
keep the coolant in the original container
and away from children. There is a risk of
poisoning.
-When working in the engine compartment,
remember that the radiator fan can switch
on even if the ignition is switched
off, wh ich
increases the r is k of injury.
@ Note
Do not add coolant if the expans ion tank is
empty . A ir could enter the cooling system and
-
damage the eng ine . If this is the case, do not ..,.

Cl 00 .-< N r-­N .-< 0 r-­Vl 00
authorized Audi Service Facility for more in­
formation.
- Do not connect or disconnect the charging
cable while charging because this increases
the risk of an exp losion.
(D Tips
- Only charge the vehicle battery through the
connections in the engine compartment.
- Read all of the manufacturer's instructions
for the charger before charging the vehicle
battery.
Windshield washer system
Fig. 186 Engine compa rtment: washer flu id reservo ir cap
The windshield washer reservoir W contains the
cleaning solution for the windshie ld and the
headlight washer
system* ¢ page 236, fig . 180.
The reservoir capacity can be found in
¢page 288.
To reduce the risk of lime sca le deposits on the
spray nozzles, use clean water with low amounts
of calc ium. A lways add window cleaner to the wa­
ter. When the outs ide temperatures are cold, an
anti -freezing agent should be added to the water
so that it does not freeze.
@ Note
-The concentration of anti-freezing agent
must be adjusted to the vehicle operating
cond itions in the respective climate. A con­
ce ntrat ion that is too high can lead to vehi­
cl e damage.
- Never add radiator anti-freeze or other addi­
tives to the washer fluid.
Checking and Filling
- Do not use a glass cleaner that contains
paint so lvents, because t his could damage
the paint.
Service interval display
The service interval display detects when your ve ­
hicle is due for service .
The service interval display works in two stages:
-Inspection or oil change reminder : after a cer-
tain distance driven, a message appears in the
In fotainment system display each time the ig ­
nition is switched on or off. The remaining dis­
tance or time is disp layed briefly.
- Inspection or oil change due: if your vehicle
has reached an inspection or oil change interval
or both intervals at the same t ime, the mes­
sage
Inspection due! or Oil change due! or Oil
change and inspection due!
appears briefly af ­
ter switching the ignition on/off .
Checking service intervals
You can check the remaining distance or time un ­
t il the next oil change or next inspection. Se lect
in the Infotainment system: the
I MENU I button>
Vehicle > left control button > Service & checks >
Service intervals .
Resetting the indicator
An authorized Audi dea ler or authorized Audi
Service Facility w ill reset the service interval dis­
play after performing service.
If you have ch anged the oi l yourse lf, you must re ­
set the oil change interval.
T o reset the disp lay, select in the Infotainment
system: the
I MENUI button> Vehicle> left con­
trol button >
Service & checks > Service intervals
> Reset oil change interval.
@ Note
-Only reset the oil change indicator if the oi l
was changed.
- Following the service intervals is crit ica l to
maintaining the service life and value of
your vehicle, especially the engi ne. Even if
the mileage on the vehicle is low, do not ex­
ceed the time for the next service.
243

Wheels
Wheels
Wheels and T ires
General information
~check your tires regularly for
damage (punctures, cuts, cracks
and bulges). Remove foreign ob ­
jects from the tire tread.
~ If driving over curbs or similar
obstacles, drive slowly and ap­ proach the curb at an angle.
~Have faulty tires or rims re­
placed immediately.
~ Protect your tires from oil,
grease and fuel.
~ Mark tires before removing
them so that the same running
direction can be maintained if
they are reinstalled.
~Lay tires flat when storing and
store them in a cool, dry location
with as little exposure to light as
possible.
_&. WARNING -
-Never drive faster than the maximum permitted speed
for your tires. This could cause
the tires to heat up too much.
This increases the risk of an
accident because it can cause
the tire to burst .
-Always adapt your driving to the road and traffic condi-
244
tions . Drive carefully and re­
duce your speed on icy or slip­
pery roads . Even winter tires
can lose traction on black ice.
(@ Note
-Please note that summer and
winter tires are designed for
the conditions that are typical
i n those seasons . Aud i recom­
mends using winter tires dur­
ing the winter months . Low
temperatures significantly de­
crease the elasticity of summ­
er tires, which affects traction
and braking ability. If summer
tires are used in very cold
temperatures, cracks can form
on the tread bars, resulting in
permanent tire damage that
can cause loud driving noise
and unbalanced tires.
-Burnished, polished or chromed rims must not be used in winter driving condi­
t ions. The surface of the r ims
does not have sufficient corro­
sion protection for this and
could be permanently dam ­
aged by road salt or similar
substances.

Wheels
and the tire pressures specified
on the label on the driver's side
B­
pillar, always follow the specifica­
tion on the B-pillar label
¢ page 254, fig. 189.
Make sure that the tire designa­
tion on your tire matches the des-
Model/ Tire designation
ignation on the tire pressure label
and the tire pressure table.
The following table lists recom­ mended tire pressures in cold
tires according to the load and
the size of the tires installed.
Tire pressure
Engine Normal load Maximum load
(up to 2 people)
front
PSI
TT : 245/45 R17 95Y 32
2.0 l
245/40 R18 93H 32
4-cylinder
245/40 R18 93Y 32
245/35 R19 93Y 35
255/30 R20 92Y 35
A WARNING
Please note the important safe­
ty precautions regarding tire
pressure ¢ page 254 and load
limits¢ page 256.
Tires and vehicle load limits
There are limits to the amount of
load or weight that any vehicle
and any tire can carry. A vehicle
that is overloaded will not handle
well and is more difficult to stop.
Overloading can not only lead to loss of vehicle control, but can al­
so damage important parts of the
vehicle and can lead to sudden
tire failure, including a blowout
256
kPA
220
220
220
240
240
rear front rear
PSI kPA PSI kPA PSI
29 200 33 230 30
29 200 33 230 30
29 200 33 230 30
32 220 35 240 32
32 220 38 260 32
and sudden deflation that can
cause the vehicle to crash.
kPA
210
210
210
220
220
Your safety and that of your pas­
sengers also depends on making
sure that load limits are not ex­
ceeded. Vehicle load includes ev­
erybody and everything in and on
the vehicle. These load limits are
technically referred to as the vehi­
cle's
Gross Vehicle Weight Rat­
ing
("GVWR").
The "GVWR" includes the weight
of the basic vehicle, all factory in­
stalled accessories, a full tank of
fuel, oil, coolant and other fluids
plus maximum load. The maxi­
mum load includes the number
of .,.

Cl 00 ... N r--­N ... 0 r--­Vl 00
Care and cleaning
Component Situation Solution
Displays /instru·
Deposits Soft cloth with LCD cleaner; dust deposits in the
ment cluster lower area of the instrument cluster can be re-
moved using a soft brush.
Controls Deposits Soft
brush, then a soft cloth with a mild soap solu-
tiona)
Safety belts Deposits Mild soap solution a), allow to dry before letting
them retract
Textiles Deposits adhering to the
Vacuum cleaner
artificial leather, surface
Alcantara Water-based deposits such Absorbent clot
h and mild soap solutiona)
as coffee, tea, blood, etc.
O il-based deposits such as Apply a mild soap solut ion
a ), blot away the dis-
oil, make -up, etc. solved oil or dye, treat afterward with water, if nee-
essary
Specia l deposits such as ink, Special stain remover, blot wit h absorbent materi -
nail polish, latex paint, shoe al, treat afterward with mi ld soap solution, if neces -
polish, etc. sary
a)
Natural leather Fr
esh stains Cotton cloth
with a mild soap solutiona)
Water-based deposits such Fresh stains: absorbent cloth
as coffee, tea, blood, etc . dried sta ins: sta in remover suitable for leather
Oi l-based deposits such as
Fresh stains: absorbent cloth and stain remover
oil, make-up, etc. suitable for leather
dried stains: oil cleaning spray
Special deposits such as ink , Spot remover suitable for leather
nail polish, latex paint, shoe
polish, etc.
Care Regularly apply conditioning cream that protects
from light and penetrates into the mater ial. Use
specially-colored conditioning cream, if necessary .
Carbon parts Deposits clean
the same way as p lastic parts
a) Mild soap so lution: maximum two tablespoons of ne utra l soap in l quart (1 lite r) of wate r
A WARNING
The windsh ield may not be treated with wa­
ter-repelling windshield coating agents. Un­
favorable conditions such as wetness, dark­
ness, or low sun can result in increased glare.
Wiper blade chatter is also possible.
0 Note
-Headlights/tail lights
-Never clean headlights or tail lights wi th a
dry cloth or sponge .
-
-Do not use any cleaning product that con­
tains alcoho l, because they could ca use
cracks to form.
- Wheels
-Never use any paint polish or other abra-
sive materials.
-Damage to the protective layer o n the
rims such as stone chips or scratches must
be repaired immediately.
-Camera lenses
269

Cl co .... N ,....
N ...... 0 ,....
Vl co
Interior fuse assignment
Fig. 207 Vehicle interior: fuse assignmen t
No. Equipment
Fl Power top cont
rol module (Roadster)
F2 Power top control module (Roadster)
F4 Central computer processor (MIB
-2)
FS Gateway
F6 Selector lever (automatic transmission)
Climate control system controls, rear w in-
F7 dow defogger relay coil, tire pressure
mon itoring
Switch for the electromechanical parking
F8 brake, light switch, rain/light sensor, inte-
rior lighting, anti -theft alarm system, di -
agnostic connector
F9 Steering column switch module
FlO Display
Fll All whee
l drive clutch
F12 Infotainment components
F13 Control module for suspension control
F14 Climate control system blowe r
FlS Electronic steering column
lock
F16 I
nfotainment system components, safety
be lt microphone (Roadster)
No.
Fl7
F1 8
Fl9
F20
F 22
F24
F 25
F 26
F 27
F28
F2 9
F 31
F3 2
F33
F 34
F 35
F36
F37
F3 8
F39
F40
F41
F 42
F43
F44
F45
F46
F49
F S3
Fuses and bulbs
Equipment
Instrument cluster
Rearview camera
Convenience access control module
Power lumbar support adjustment
Front passenger's side neck heating (Road-
ster)
R ight vehicle electrica l system control
module
Driver's s ide door (for example power w in-
dows)
Seat heating
Vehicle electrical system control module
AMI High media port
Vehicle e lectr ical system control module
Left vehicle electrical system contro l mod-
ule
Driver assistance systems
Airbag
Socket relay, inte rior sound , back-up light
switch, temperature sensor, oil leve l sen -
sor
Diagnosis, headlight range control system,
a ir quality sensor, automatic dimming
rearview mirror
R ight cornering light/ right LED-headlight
L eft cornering light/ left LED-headlight
Engine control module, ESC control mod-
ule
Front passenger's side door (for example
power windows)
C igarette lighter, sockets
SCR relay and delivery unit
Central locking area
On-board computer
A ll wheel d rive clutch control module
Power adjustable driver's side seat
Driver's side neck heating (Roadster)
Starter, clutch sensor
Rear window defogger
281