2018 AUDI Q7 key

Parking syste m s
Adjusting the parking aid
Applies to: vehicles with a rear parking system/parking sys­
tem plus/rearview camera/peripheral cameras
The functions are adjusted in the Infotainment
system .
.,. Se lect in the Infota inment system: IM ENU I but­
ton
> Vehi cle > left contro l bu tton > Driv er a s­
s is ta nce > Par kin g aid .
Or
.,. When the parking aid is active, se lect in the In -
fotainment system : rig ht contro l button *.
End sy stem * -stop t he parking aid
Acti vate automaticall y* -switch automatic acti­
vation on/off
Front volume * -volume for the front area
Rear volume -volume for th e re ar ar ea
Entertainm ent f ader -the vol ume of t he aud io/
video source is lowered when t he parking system
is turned on.
The new value is g iven b riefly du ring the adjus t­
ment.
Vie w* -switch between an optical d isplay
( Graphic ) and camera image ( Cam era ) in the
r ight section of the display.
Tr ail er view * -show trailer view
*Auto. front /rear came ra change * -the view be­
h ind the veh icle
( Rear mode) is displayed auto­
mat ically when you shift into reverse gear. The
v iew in front of the vehicle
( Front mode) is d is ­
played automatically when you shift into the for­
ward gea rs. When first activat ing in a forward
gea r with the
P,, 1~ button, the front s ide v iew is
d isp layed
( Corn er view (fr ont ) mode).
If you do not set the./, the view behind the vehi­
cle
( Rear mode) is a lways d isplayed and it does
not swi tch to the
Front mode whe n a forward
gea r is selec ted .
(0 Tips
-Seve ral menus can be accessed w ith the
r ight contro l button only when the park ing
a id is ac tive.
- The settings for volume and automatic act i­
vation* are au toma tically s to red and as-
140
signed to the remote control key be ing
used .
Error messages
Applies to: vehicles with a rear parking system/parking sys­
tem plus/rearview camera/peripheral cameras
Ill Rear parking aid : malfunction! Obstacles
cannot b e dete cted
Ill Front par king aid: m alfunction! Obstacles
cannot b e detected
Ill Pa rking aid : malfunct ion ! Obstacles cannot
b e detected
When one of these messages appears, there is a
system malfunction. The L ED in the
Pw, button al­
so blinks when sw itching it on. The relevant mes­
sage on ly appears again when you manually acti­
vate the park ing aid with the button .
[ii Rear parking aid: obstacle detection re stri ct­
ed
The rear cross -traffic assist* ¢ page 124, Rear
cross-traffic assist
is not available. Either the ESC
i s sw itched off, or the radar sensors may be cov ­
ered by a bike rack, stickers, leaves, snow or oth­
er objects. Swi tch the ESC on , or clean the area in
front of the sensors if necessary¢
page 121,
fig . 115 .
If this message cont inues to be d is­
played, drive immed iate ly to an authori zed Audi
dealer or author ized A udi Service Fac il ity to have
t h e mal funct ion repaired .
Parking system plus *
If a sensor or speaker is faulty, the IM symbol
will appear in front of/behind the vehicle in the
Infotai nment system d isplay. If a rear sensor is
faulty, only obs tacles that are in areas @ and @
are show n
¢page 133, fig. 128 . If a front senso r
i s fa ulty, only obstacles that are in areas © and
@ are s hown.
Peripheral cameras*
There is a system malfunction if the% symbol
appea rs and the co rresponding area of the dis ­
play is shown in black . The camera is no t wo rking
in this area.

a co ...... N r--. N ...... 0
0
:E ' Multi Media Interface
Traffic safety information
Audi recommend s performing certain Infotain­
ment system fun ctions, such as entering a desti­
nation, only when the vehicle is stationary . Al ­
ways be prepared to stop operating the Infotain­
ment system in the interest of your safety and
the safety of other road users.
_& WARNING
Only use the Infotainment system when traf­
fic conditions permit and always in a way that
allows you to maintain complete control over
your vehicle.
@ Tips
Certain functions are not available while driv­
ing .
Introduction
The Multi Media Interface, or MMI for short,
combines various systems for communication,
navigation* and entertainment in your Audi. You
can opera te the MMI using the MMI control pan­
el, the multifunction steering wheel or the voice
recognition system*.
Fig. 148 MMI control pane l wit h MMI touc h
Multi Media Inte rface
Fig. 149 MMI co ntro l pane l w itho ut MM I to uch
MM I control panel overview
(D Control knob with joystick function *
....... ... ... .. ............. 151, 155
@ Control knob . . . . . . . . . . . . . . . . . 151
@ Left control button . . . . . . . . . . . . 152
@ Right control button . . . . . . . . . . . 152
® Buttons for opening menus
directly . . . . . . . . . . . . . . . . . . . . . . 151
®
I MENUI button . . . . . . . . . . . . . . . . 151
(J) IBACKI button . . . . . . . . . . . . . . . . 151
@ Shortcut keys . . . . . . . . . . . . . . . . . 156
® MMI touch contro l pad* . . . . . . . . 153
MMI On/Off knob with
joystick function
Operating
Fig. 150 MMI On/Off knob with joystick function
Switching the MMI on/off: the MMI can be
switched on/off manually .
- Switching on manually: press the On/Off knob
(D briefly c::> fig. 150 . Or: press the IM ENU I but­
ton ®
c::> page 149, fig. 148 or¢ page 149,
fig . 149,
or one of the buttons to open the me-
nus directly @. ..,.
149

Multi Media Interface
Opening the selection/options menu with
the control knob
A pplies to: ve hicles w ith joystick function
F ig . 163 Op ening the se le ctio n/op tion s m enu with the
c ontrol knob
Requirement: the selection menu symbol:§) must
be disp layed in the Infota inment system display
¢fig . 163 .
Opening /closing the selection menu : push the
control knob to the left¢
fig. 163 to open the se ­
lection menu . Then you can select and conf irm a
function us ing the control knob.
Press the
! BACKI button (J) ¢ page 149, fig. 148
to return to the function one level up.
Requirement: the options menu symbol
B must
be disp layed in the Infotainment system display
¢fig. 163.
156
Opening/closing the options menu : push the
contro l knob to the right¢
fig. 163 to open the
options menu . Then you can select and confirm a
funct ion using the control knob.
Press the
I BACK ! button (J) ¢ page 149, fig. 148
to return to the function one leve l up.
Shortcut keys
Frequently used radio stations can b e stor ed on
the shortcut keys .
The shortcut keys are on the MMI control panel
®¢page 149, fig . 148 or ¢ page 149, fig. 149.
Storing radio stations: turn the control knob to
the desired radio s tation i n a list (for examp le, a
radio station in the FM station list). Press and
hold the desired shortcut key for severa l seconds .
The active radio station will be stored on the
shortcut key.
Accessing a radio station : press the shortcut key.
Displaying a radio station: swipe you r finger over
the shortcut keys.
Deleting a stored radio station: reset the Short­
cut keys
to the factory default sett ing
¢ page 246.
(D Tips
It is not possible to enter numbers using the
shortcut keys. Use the number speller
¢
page 157 or MMI touch*¢ page 153 to en­
ter numbers.

Cl a:, ...... N
" N ...... 0
0
::r ' Audi connect vehicle control
Introduction
Applies to vehicles with Audi connect vehicle control
With the Audi connect vehicle control services l) ,
you can access various information or use individ­
ual functions in the
Audi MMI connect app or in
myAudi .
Audi connect vehicle control includes the follow­
ing services:
- Remote locking and unlocking ¢
page 198.
-Vehicle status report¢ page 198.
-Parking location ¢ page 198 .
-Geofencing Alert ¢ page 199.
-Speed Alert ¢ page 199.
-Valet Alert ¢ page 199.
- Stolen Vehicle Locator ¢ page 199.
-Online Audi service request ¢page 199.
(D Tips
-Accessing specific data or controlling func­
tions remote ly depends on the charge leve l
of the vehicle battery. Therefore, these
functions only have limited availability after
switching off the ignit ion.
- The services are provided through a SIM
card installed in the vehicle. The cost of the
call and data connections is included in the
price for the services. Services are provided
assuming that the cell phone network re­
quired for the installed S IM card is function­
in g and ready to operate. The available serv­
ic es set by Audi AG are only available within
the cell phone network coverage area for
the cell phone service provider selected by
Audi AG .
- You can also find more information on Audi
connect on line at www.audiusa.com.
l) In pre parat io n at t he time of p rinting. T he a vailab ilit y o f
the services o ffered depends o n the co untry and may
c hang e over tim e.
Audi connect vehicle control
Setup
Applies to vehicles with Audi connect vehicle control
To use Audi connect vehicle control services 1>,
please note the fo llowing :
Creating and verifying a user account
"'Create an account at www.aud iusa.com/myaudi
and verify it.
Setting a key user in the vehicle
Requirements: the ignition must be switched on .
Another key user must not be set in the veh icle .
If necessary, reset the key user ¢
page 198.
.. Select in the Infotainment system: I M ENU ! but­
ton
> Audi connect > if necessary, Display
available functions >
right control button >
Audi connect user management > Key user >
Set key user .
"' Enter the user name for your ve rified account
and enter the IO-digit vehicle code. You can rub
the key tag for your remote control key to re­
veal the vehicle code ¢
page 30.
.. Select and confirm Log in.
You can now use the vehicle control services
through the
Audi MMI connect app or through
www .audiusa.com/myaudi.
Using vehicle control services in the Audi
MMI connect app
Requirement: your mobile devices must be com­
patible.
.. Install and start the
Audi MMI connect app on
your mobi le device .
.. Log in to the
Audi MMI connect app using your
user name and password and se lect your vehi­
cle.
(D Tips
- Store the vehicle code in a secure place . It
may be necessary to re-enter the vehicle
code.
197

Audi connect vehicle control
-Pay attention to upper-and lower -case let ­
ters when entering the vehicle code.
- If you do not have the 10-digit vehicl e code,
contact an authorized Audi dealer or author­
ized Audi Service Facility .
Additional options
Applies to vehicles with Audi co nnect vehicle control
License subscription
The validity and expirat ion date of you r subscrip­
tions are displayed. When
Warning before sub­
scription expires
is activated, a message wi ll be
disp layed warning you that your license is about
to expire.
Select :
!MENU ! button> Audi connect > Display
available functions >
right control button> Li­
cense subscription.
Resetting the primary user
F or examp le, you ca n reset the key user when
selling your vehicle in order to deactivate these
services .
Requirement: the ignition must be switched o n.
Select :
!M ENU ! button> Audi connect > right
control button
> Audi connect user management
> Key user > Reset key user .
Warning levels
Requirement: the primary user must have set one
or more warning levels. Secondary users can only
see if a warning level is active or not .
Select:
! MENU ! button> Audi connect > right
control button
> Alerts.
Remote locking and
unlocking
Applies to veh icles with Audi connect vehicle control
You can lock and unlock your veh icle using this
service .
Requirement
-This requires the 4-dig it PIN that you specified
during the verification on www.audiusa.com/
myaud i.
- The vehicle must be stationary.
198
-The ignition must be switched off.
Vehicle status report
Applies to vehicles w ith Aud i connect ve hicle control
The Dr iver Informat ion System collects data un­
der certain conditions and sends it to a server.
When data is sto red, you can access va lues such
as these using the service :
- Remaining range,
- Fue l tank level,
- Oil level,
- If the vehicle doors are open/closed or locked/
un locked,
- mi leage,
- Next oil change
- Next service,
- Warning messages,
- If the parking lights are on/off .
A WARNING
Do not ignore messages and warning or ind i­
cator lights that turn on in the vehicle be­
cause of the info rmation in the status report.
This could lead to break downs in on the road ,
accidents and serious injuries.
Parking location
Applies to vehicles w it h Aud i connect ve hicle co ntrol
The vehicle collects data unde r ce rta in cond it ions
and sends it to a server .
When data is stored, you can access values such
as these using the service :
- Vehicle location display,
- Display of one's own location,
- Route to your vehicle .
If your mob ile dev ice also has a navigation func­
tion, you can nav igate to your last known parking
l ocation.
Deactivating and activating parking position
- Select: !MENU!> Audi connect> Car Finder
parking position .
If you do not set./, no location information will
be sent to the server.

Cl a:, ...... N
" N ...... 0
0
::r ' (D Tips
- The new parking location cannot be deter­
mined with this service if the vehicle is
moved after shutt ing the vehicle off and
without sw itching the ign ition on and off
again, for example when being towed or if
the veh icle is stolen .
- If the vehicle is moved and shut off again
us ing the second key, for example, the new
parking locat ion is transm itted to the server
afte r switching the ignition off.
Geofencing Alert
Applies to vehicles with Audi connect vehicle control
You can set approved and forbidden zones for
your veh icle using this service . If your vehicle
l eaves an approved zone or ente rs a forbidden
zone, you will be notified by a push not ificat ion
and/or an e -mai l. You can set up to five zones
and a lso assign time limits .
Requirement
-You must be ver ified as the pr imary use r of your
vehicle on myAudi.
0) Tips
You can set o n myAudi if you would like to be
notified via push not ificat io ns a nd/or e-ma il.
Speed Alert
Applies to vehicles with Audi connect vehicle control
You can set up to two speed limits for your veh i­
cle us ing th is serv ice. If your vehicle exceeds a set
speed limit, you will be notified by a push not ifi­
cation and/or e -mail.
Requirement
- You must be ver ified as the pr imary user of your
vehicle on myAudi .
(D Tips
You ca n set o n myAudi if you would like to be
notified via push not ificat ions and/or e-ma il.
Audi c onn ect ve hicl e co ntr ol
Valet Alert
Applies to vehicles with Audi connect vehicle control
If you give your vehicle over to a parking service,
you can s et a zone and a sp eed limit using the
Audi MMI conne ct app . If the vehicle leaves the
z one or the exceeds the speed lim it, you will be
noti fied by a push notification and/or e-mail.
Requirem ent
- You must be verified as the primary user of your
vehicle on myAudi.
(D Tips
You can set on myAud i if you would like to be
notified via pus h notifications and/or e -mail.
Stolen Vehicle Locator
Applies to vehicles with Audi connect vehicle control
This serv ice helps yo u to track yo ur veh icle if it is
stolen.
Proceed as fo llows if there is a theft:
"" Contact the police . You receive a Case ID .
"" Call the service hotline and give your Case ID .
The serv ice hotline will forward the estab lished
data to the police .
{!) Tips
You rece ive the Audi Service hot line number
when you purchase your vehicle .
Online Audi service
request
Applies to vehicles with Audi connect vehicle control
Requirement: to be able to use on l ine Aud i serv­
ice request , you must activate the service at
www .aud iusa.com/myaud i and se lect an aut hor­
ized Audi dea ler or author ized Audi serv ice facili­
ty .
Online Audi serv ice request transmits service- re l­
evant data to your se lected autho rized Aud i dea l­
er or autho rized Aud i service fac il ity. They w ill
contact you before your next service appoint ­
ment .
199

a co ...... N r--. N ...... 0
0
:E ' Radio text is availab le for the selected station .
See
~ page 221.
@ FM HD Radio technology
The station is received through FM HD Radio
technology .
@ Screen view
Display Cover art or Station logo. See
~ page 224, Preferred picture view*.
Display ing the station list:
Turn the control knob. Or: press the I BACK ! but­
ton .
Radio menu
Fig. 203 Example: Rad io menu
.. Select : I RADIO I button > left control button.
Setting the frequency band : select and confirm
the desired freq uency band in the radio menu
~ fig. 203. Or: press the I RADIO I button repeat­
ed ly until the desi red frequency band is set. The
station list is displayed .
@Presets
The presets list is displayed ~ page 223, Pre­
sets .
@ SiriusXM alerts
App lies to: ve hicles with SiriusXM alerts
After you have stored a SiriusXM alert for your fa­
vor ite tracks or artists ~
page 222, an overview
of your favor ite tracks or artists currently be ing
received on SiriusXM is displayed .
@SiriusXM
Appl ies to: ve hicles with SiriusXM alerts
The SiriusXM* station list is displayed.
Radio
Additional frequency bands
Depending on the vehicle equipment, you may al­
so be able to select additional frequency bands
@!@ ~fig. 203 in the se lection men u.
Presets
You can store your favorite stations from every
frequency band in the presets list.
.. Select: the I RADIO I button > left control button
> Presets.
Requirement: the presets list must be disp layed .
-Storing pre sets : select and confirm a free pre­
set space.
Follow t he system instructions.
- Select and confirm
a station from the list if
necessary.
Requirement: a station list must be d isplayed .
-Storing presets : select : an entry from the list>
right control button > Store as preset. Or :
press and hold the contro l knob for several sec ­
onds .
T he shortcu t keys are automatically assigned to
t h e prese ts 1 to 8. You can selec t the stat ions di­
rectly using the preset buttons~
page 156 .
-Displaying the presets list : select: I RADIO I but-
ton
> Preset s.
Requirement: the favorites list must be dis­
played.
- listening to presets : select and confirm a pre­
set from the list.
- Move preset : select a preset from the list>
right control button > Move preset . Or : press
and hold the control knob for several seconds .
Select and confirm the location of the selected
favorite.
- Deleting presets: select a preset from the list >
right control button > Delete preset > Delete
this preset or Delete all presets .
Additional settings
Radio settings
.. Select: I RADIO I button > rig ht control button >
Radio settings. ..,.
223

System settings
wait for the sig nal t one (bee p) to say a new
command.
Volume : you can a djust th e vol ume of th e
p romp ts by turning the con tro l k no b.
Individual speech training (on ly when the v ehi­
cle is s ta ti onary): yo u ca n ad apt the vo ice recog­
ni tion sy ste m to your voic e or pro nunciati on in
or der to im prove the sys tem's a bili ty to re co gni ze
your speec h. Indivi dua l speech train ing is com ­
p rised of 20 s peech ent ries t hat consist o f com ­
mands and sequences of numbers . You can de­
lete the p rogrammed voice t rain ing with the
Re­
set individual speech training
function.
Display brightness
You can a djust the brigh tness o f the Info tain ­
ment system disp lay by t urning the cont ro l knob.
Factory settings
D epe ndi ng on t he ve hicle eq uipme nt, th e fo llow­
i ng fu nctio ns ca n b e rese t to factory se ttings :
-Sound settings
- Radio
- Media settings
- Jukebox *
- Directory
-Telephone
- Bluetooth and Wi-Fi*
- Navigation settings*
- Navigation and online memory *
- Voice recognition system*
- Shortcut keys
- Message settings *
-Apps *
- Tool tips
- Audi connect *
- Audi smartphone interface *
You can select the desi red functio ns i nd ividua lly
or all at once with the option
Select all entries .
Select and confirm Restore factory settings .
(D Tips
Make sure that not o nly the sett ings were de­
leted but a lso the sto red data, if ap plicable.
246
Connection manager
Introduction
The connection manager gives you an overview
of your conn ected devic es and th eir network sta ­
tus .
Settings Conne-ction manager I
-====- ,.· • Prima hone: MyPhone .,.
c MyPhone
• Second ary phone :
• Data conn ection :
• MM I
connect App :
• Audi smartpho ne:
Fig. 216 Co nnec tion man ag er
Ii'!
Not connected
Not conn.,ct.,d
Not connected
Not conn..cted
"'Select : !ME NUI bu tton> Settings > left con trol
bu tton >
MMI settings > Connection manager .
"'Sele ct and confirm a menu item.
If a mobile device was already connected and you
select and co nfirm the co rresponding menu item,
t h e dev ice name and co nnect ion mode a re dis­
p layed under the menu i tem
r:!;> fig. 216.
Yo u can indiv id ually Connect (~ ) or Disconnect
(0) a pa ired device .
Requirement:
- The ve hicl e m ust be statio na ry and the ignit io n
m ust be switc hed on .
- Th e Bluetooth sett ings will open on yo ur mo ­
bi le device dur ing the connection setup .
- T he Blue tooth func tion and v is ibili ty of the MMI
c:!;> page 24 8 and mobile device must be switc h­
ed on.
- T he mo bile device to be con nected m ust not be
connected to any othe r Bluetoot h dev ice .
Primary phone
App lies to: vehicles wit h telepho ne
- Connect new device: search for and connect a
cell p hone.
- List of devices already paired : select yo ur cell
phone from the list of all the dev ices that a re
already paired.