INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.123
Trip computer – Supplementary information
General information for both Analog and Digital trip computer functions.
Average fuel consumptionFuel consumption since the last time this func- tion was reset.
Average speedThe vehicle's average speed since the last timethis function was reset.
Current fuel consumptionCurrent fuel consumption is calculated approxi-mately once a second. When the vehicle is mov-ing at low speed, fuel consumption is displayedper unit of time. At higher speeds, it is displayedin terms of distance. Miles or kilometers can be displayed, see the heading "Changing units".
Distance to emptyThis function shows the approximate distancethat can be driven on the fuel remaining in the tank. When
Distance to empty shows "----",
there is very little useable fuel remaining in that tank; refuel as soon as possible. The calculationis based on average fuel consumption during thelast 20 miles (30 km) of driving and the amountof fuel remaining in the tank (the accuracy of thisfigure may vary if your driving style changes). An economical driving style will generally increasethis distance. See Economical driving (p. 278) for information about driving economically.
Digital speed display
*Speed is expressed in the unit not used by theinstrument panel's speedometer e.g., if the nor-mal speedometer is in mph, the trip computer willdisplay in the speed in km/h and vice versa.
Resetting an analog instrument panel
Trip odometer(s) and average speed
1. Display trip odometer T1 or T1, or Average
speed.
2. Press and hold RESET until selected func-
tion is reset.
Each trip computer heading must be reset indi- vidually.
Resetting a digital instrument panel
Trip odometer
1. Turn the thumb wheel to select the combi-
nation of headings containing the trip odom- eter to be reset.
2. Press and hold RESET until selected trip
odometer is reset.
Average speed and fuel consumption
1. Select Trip computer reset and press OK. 2. Select one of the following alternatives using
the thumb wheel and press OK:
• mpg
• mph
• Reset both
3. Finish by pressing RESET.
Changing unitsTo change the unit (miles/km) used to measure distance and speed, go to
MY CARSettings
System optionsDistance and fuel units.
NOTE
In addition to changing units in the trip com- puter, this also changes the units used in the Volvo Navigation System (VNS) *.
Related information
• Trip computer – introduction (p. 117)
• Trip computer – functions, analog instrument panel (p. 118)
• Trip computer – functions, digital instrumentpanel (p. 121)
• Trip computer – Trip statistics (p. 124)
||
MAINTENANCE AND SERVICING
326
CSB menu accessOnce the prerequisites have been established, all CSB-related menus can be accessed in MY CAR
by pressing OK/MENU and then selecting
Maintenance & repair.
Booking information and data from the
vehicle
If you request an appointment from your vehicle, with your consent, booking information and data about your vehicle 1
will be transmitted to your
preferred retailer.
Using the serviceOnce the prerequisites have been established, all CSB-related menus can be accessed in MY CAR
by pressing OK/MENU and then selecting
Maintenance & repair.
If the time for the next regularly scheduled serv- ice is approaching, if the vehicle requires certaintypes of repairs or if a system needs to bechecked, a message will be displayed. You willthen by guided through the steps required tobook service or repairs.
On-screen service messages
On-screen service message
The pop-up service alert menu offers the follow- ing alternatives:
•
Yes: The vehicle will transmit a booking
request as well as vehicle data directly to your preferred retailer. In return, you willreceive an email from this retailer with a linkto their booking portal. From a smartphone ora computer, you can select a day and timethat suits you and specify any other servicerequests that you may have. When you havesubmitted your request, it will be entered intothe retailer's booking portal and you willreceive immediate confirmation online andvia email. The service reminder light in the vehicle's instrument panel will also be turnedoff remotely by Volvo.
•
No: No other messages will be displayed on
the Sensus screen but the Service Reminder Light on the vehicle's instrument panel willstay on. If you have answered "No", servicecan still be booked manually (see the follow-ing section).
•
Postpone: The pop-up menu will be dis-
played that next time the engine is started.
Booking service or repairs manually
Access your Volvo On-Line Service Scheduler portal from a smartphone or a computer to selecta day and time that suits you and specify anyother service requests that you may have. Whenyou have submitted your request, it will beentered into the retailer's booking portal and youwill receive immediate confirmation online and viaemail.
My AppointmentsThis displays booking information.
–Select Maintenance & repairMy
Appointments.
Transmitting vehicle dataIn order for a retailer to access vehicle data, the information is initially sent to a central Volvodatabase (not directly to your retailer) where any
1 This information includes: service requirements, status of various functions, odometer reading and the vehicle's VIN number and software version.
MAINTENANCE AND SERVICING
327
retailer can access or search for this information using your vehicle's VIN number. This numbercan be found in your warranty booklet or on thedashboard at the lower left corner of the wind-shield.
–Select Maintenance & repairSend
vehicle data.
Booking information and vehicle dataWhen you opt to book service from your vehicle, booking information and vehicle data will betransmitted. Vehicle data consists of a number ofparameters in the following areas:
• Service requirements
• Function status
• Fluid levels
• Odometer reading (mileage)
• Vehicle Identification Number (VIN)
• The vehicle's software version
Related information
•
Volvo ID (p. 22)
Maintenance – opening/closing hood The hood is opened by first releasing the lock from the passenger compartment and thenpressing the release control.
Opening and closing the hood
G031911
Pull the lever located under the left side of the dash to release the hood lock. An infor-mation symbol will illuminate when the hoodis open.
Lift the hood slightly. Press the release con- trol (located under the right front edge of thehood) to the left, and lift the hood.
WARNING
Check that the hood locks properly when closed.
Related information
•Maintenance – owner maintenance (p. 323)
• Engine compartment – overview (p. 328)
INDEX
391
Malfunction indicator light 74
Messages in the instrument panel 115, 116Mirrors
defroster 106
power door 104, 105
rearview, auto-dim function 106
retractable 104, 105
vanity 143
Motor oil checking 329
volumes 376
O
Occupant safety 28
Occupant weight sensor 38
Octane recommendations 274
Odometer, trip 79Oilchecking 329
volumes 376
Oil level sensor 330
Oil quality 375
OK button 115, 116
On Call Roadside Assistance 25
Outside temperature sensor 78
Overhead courtesy lighting 97
Overheating, engine 76
Ownership, changing 19
Oxygen sensors, heated 277
P
Paint, touching up 363
Park assist 233, 237
Park Assist Camera 237Parking brake electric, applying/releasing 267, 268, 270
warning light 75
Parking lights 95
Pedestrian detection 215, 218
Polishing 361Power front seat memory function 82
Power meter 72
Power mirrors 104, 105 defroster 106
Power steering adjustable 179
fluid 333
Power steering fluid 378
Power tailgate 167, 168
Power windows 102 laminated glass 103
Pregnancy, using seat belts during 32
Private locking 156
PROPOSITION 65 WARNING 251, 348, 381
R
Rain sensor 100
Rear fog lights 95, 339
Rear park assist 233, 237
Rear seat head restraints 86Rear seats center head restraint 85
folding 85, 87
heated 131
Rearview mirror auto-dim function 106
compass 107
Rear window defroster 106
Recalls 28
Recalls, child restraints 49
Refrigerant 380
Refueling 273, 274 fuel filler cap 277
INDEX
393
Supplemental restraint system 33
warning light 75
Symbols, overview 382
T
Tailgate locking/unlocking 165
opening manually 166
power operated 167, 168
wiper/washer 102
Tailgate wipers 343
Taillights, changing bulbs 339Temperature sensor ambient 78
Temporary spare tire 294
Three-way catalytic converter 277
Tire designations 298
Tire inflation pressure 379
Tire Monitor 305, 306, 307
Tire Pressure Monitoring System 308, 310 indicator light 74
Tires 288 age 289
changing from summer to winter 291
glossary of terms 301
improving economy 290
inflation pressure 296, 297
inflation pressure table 379
rotation 288
Self-supporting run flat tires (SST) 311
snow 303
spare 294
specifications 298
speed ratings 298
storing 289
studded 303
tire pressure monitoring system 308
tire sealing system 312
tread wear indicator 290
uniform tire quality grading 302
Tire sealing system 312 Top tether anchors (child restraint sys- tems) 58
Touching up paint 363
Towing a trailer 279, 281, 282 trailer hitch 281
Towing the vehicle 282, 283, 284
Traction control 174, 175
Trailer towing 279, 281, 282 trailer hitch 281
Transmission general description 252, 255
Hill Start Assist 253oil 377
shiftlock override 257
Tread wear indicator 290
Trip computer 117
Trip odometers 79
Trips, long distance 272
Tunnel detection 93
Turn signals 97 changing bulbs 338
indicator lights 74
Two-stage booster cushion 59, 61, 62
U
Uniform Tire Quality Grading 302
Unlocking the tailgate 165
Unlocking the vehicle 153, 163, 164, 165
V
Vanity mirror 143 changing bulbs 341
Vehicle dimensions 370
Vehicle Event Data 19
Vehicle information 21