2017 TESLA MODEL X Owner's Manual 

Testing Seat Belts
To
confirm that seat belts are operating
correctly, perform these three simple checks on each seat belt.
1. With the seat belt fastened, give the webbing nearest the buckle a quick pull.
The buckle should remain securely locked.
2. With the belt unfastened, unreel the webbing to its limit. Check that unreeling
is free from snags, and visually check the
webbing for wear. Allow the webbing to retract, checking that retraction is smooth
and complete.
3. With the webbing half unreeled, hold the tongue plate and pull forward quickly. The
mechanism should lock automatically and
prevent further unreeling.
If a seat belt fails any of these tests, contact
Tesla immediately.
Seat Belt Warnings
Warning: Seat belts should be worn by all
occupants at all times, even if driving for
a very short distance. Failure to do so
increases the risk of injury or death if an accident occurs.Warning: Secure small children in a
suitable child safety seat. Always follow
the child safety seat manufacturer

Guidelines for Seating Children
Your Model X seat belts in all passenger seating positions are designed for adults and larger
children. You must restrain infants and small children in the second and rear row seats only, and you must use a suitable child safety seat appropriate for the child

Choosing a Child Safety SeatAll children age 12 and under should ride in the second and rear row seats. Always use a child
safety seat suitable for a young child

Seating Larger Children
If a child is too large to
fit into a child safety
seat, but too small to safely fit into the
standard seat belts, use a booster seat
appropriate for the child

3. If the seat belt retained child safety seathas an upper tether, attach it to the back
of the seat (see Attaching Upper Tether
Straps on page 30).
Installing LATCH Child Seats
Lower LATCH anchors are provided in the second row outboard seats and in both rear
row seats. The anchors are located between
the seat

Bench Seats:
In the third row (if equipped), you can install
LATCH child safety seats in both seating
locations.
To install a LATCH child safety seat, slide the
safety seat latches onto the anchor bars until
they click into place. Carefully read and follow
the instructions provided by the child safety
seat manufacturer.
Monopost Seats:
Bench Seats:
Child Safety Seats
Seating and Safety Restraints29

Once installed, test the security of theinstallation before seating a child. Attempt to twist the child safety seat from side to side
and try to pull it away from the seat, then
check that the anchors are still securely in
place.
Attaching Upper Tether Straps
If an upper tether strap is provided, attach its
hook to the anchor point located on the back
of the second and third row seats.
For dual-strap tethers, position a strap on each side of the head restraint.
The method you use to run a single-strap
tether over a second row seat depends on
whether Model X is equipped with monopost
or bench seats:

Dual Straps - Second Row Monopost Seats:
Dual Straps - Second Row Bench Seats:
Single Strap - Third Row Seats
Dual Straps - Third Row Seats:
Child Safety Seats
Seating and Safety Restraints31