2017 SUBARU LEGACY Quick Reference Guide

9
To unlock all doors To lock all doors
Power door locking switchI
Seat heater (if equipped)J
Front seat heater switch
1
HIGH mode indicator
2
MID mode indicator
3
LOW mode indicator
Audio control buttonsL
These buttons allow the driver to control audio functions
without taking his/her hands off the steering wheel.
Fuel filler lid release leverK
This indicates that the fuel filler door (lid) is
located on the right side of the vehicle.
Pull
Right side
11
22
33
Driver’s side Front passenger’s
side

10
Located on the edge of each rear door.
When the lever is in the LOCK position, the rear door
cannot be opened from the inside. Deactivate the Hill Holder function when:
• Towing a trailer
• Carrying a heavy load
• When you do not frequently stop your vehicle on an
uphill slope using the parking brake.
1
To lower:
Push the upper part of the anchor and slide it down.
2
To raise:
Slide the anchor up.
Tilting
Sliding
Moonroof switch (if equipped)
1
Raise
2
Lower
1
Open
2
Close
Child safety locks
Hill Holder switch
Front seat shoulder belt anchor height
*The design may be slightly different from the
illustration depending on the models.
21
2
1
2
1
Activate/
Deactivate
u Some functions are available on certain models.
u For detailed operating and safety information, please refer to your Own\
er’s Manual.

11
FUnction F oR M oRe co MFoRtab Le DR iVe
It may be helpful to temporarily deactivate the Vehicle Dynamics Control system to escape
from the following situations.
- a standing start on a steeply sloping road with a snowy, gravel-covered, or otherwise slippery surface
- extrication of the vehicle when its wheels are stuck in mud or deep snow
Do not deactivate the system except when absolutely necessary.
Vehicle Dynamics Control mode
Vehicle Dynamics Control OFF mode
Press the switch to deactivate the Vehicle
Dynamics Control system.
Indicator lights on the combination meter
Vehicle Dynamics Control OFF switchA
Models without EyeSight system Models with EyeSight system
AHEI
GFG
K
AE
D
C
J
B

12
1
Cruise control main button: To activate and
deactivate
2
RES/SET switch:
▲RES/+ side : To increase the speed/To resume
▼SET/- side : To set speed/To decrease the speed
3
CANCEL button: To temporarily cancel
1
(Lane Keep Assist) switch
2
(Following distance setting) switch
3
RES/+ switch
4
SET/- switch
5
(CRUISE) switch
Cruise control enables you to maintain a constant vehicle speed without holding your foot on
the accelerator pedal and it is operative when the vehicle speed is 40 km/h (25 mph) or more.
EyeSight is a driving support system that uses a range of functions to assist the driver in
making decisions in order to provide for more safe and comfortable driving and to reduce
driver fatigue.

Cruise control buttons (if equipped)B
Information displayC
1
Clock
2
Climate control mode indicators
3
Outside temperature indicator
Control switch: To adjust the time shown by the clock,
press the + button or the - button.
OUT TEMP
PMMAX
A/C
Models without EyeSight system
Models with EyeSight system
1
1
23
4
5
2
3
123
Control
switch
u Some functions are available on certain models.
u For detailed operating and safety information, please refer to your Own\
er’s Manual.

13
1
ECO gauge
2
Basic screen
3
Cruise control information
4
Select lever/gear position indicator
5
Warning screen
6
Odometer/double trip meter
Control switch: By operating ▲ or ▼ of the control
switch, the screens and selection items
can be switched. When the
/SET
switch is pulled toward you, the item
can be selected and set.
km/h
km
Multi information displayD
If the BSD/RCTA OFF switch is pressed, the BSD/RCTA
OFF indicator is displayed on the multi information
display of the combination meter, and the BSD/RCTA is
deactivated.
The BSD/RCTA consists of rear radar with Blind
Spot Detection, Lane Change Assist and Rear
Cross Traffic Alert.
The system notifies the driver when vehicles in
the blind area are approaching from behind in the
neighboring lanes.
B S D / R C TA
BSD/RCTA OFF switch (if equipped)E
Control
switch
1
2
3
4
6
5

14
If the steering responsive fog lights OFF switch is
pressed, the steering responsive fog lights OFF
indicator is displayed on the Multi information display of
the combination meter, and the steering responsive fog
lights system is deactivated.
The steering responsive fog lights system automatically turns the front fog light on and
off based on the steering angle and vehicle speed when entering a curve or driving on
curved roads.
The system is intended to help prevent accidents by enabling better visibility of curves
ahead and early recognition of any disabled vehicles or other obstacles.
Steering responsive fog lights system
Steering responsive fog lights OFF switch (if equipped)F
Steering responsive fog lights system
OFF indicator
0058 Some functions are available on certain models.
00030058 For detailed operating and safety information, please refer to your Own\
er’s Manual.

15
When there is the risk of a rear-end collision with an obstacle in front, the EyeSight
system helps to minimize or prevent a collision by warning the driver. If the driver still
does not take evasive action to avoid a collision, the brakes can be automatically applied
just before the collision in order to reduce impact damage, or if possible, prevent the
collision. If the driver takes evasive action to avoid a collision, Pre-Collision Brake Assist
will operate in order to help the driver to prevent the collision.
Pre-Collision Braking System
Lane Departure Warning OFF switch (Models with EyeSight system)G
Press and hold this switch for approximately 2
seconds or longer to turn off the Lane Departure
Warning and Lane Sway Warning functions.
Pre-Collision Braking System OFF switch (Models with EyeSight system)H
Press and hold this switch for approximately 2
seconds or longer to turn off the Pre-Collision
Braking System and Pre-Collision Throttle
Management.
When vehicle speed is approximately 50 km/h (30 MPH) or more, this function warns
the driver if the system detects that the vehicle is likely to depart the traffic lane.
Lane Departure Warning

16
Some of your desired seat positions can be registered.
Register the seat position with button 1 or 2 or each
of the access keys (if equipped) and retrieve the seat
position.
The Heated Steering Wheel system warms the surface
of the steering wheel at a constant temperature.
1
2
Seat position memory function (driver’s seat - if equipped)I
Heated Steering Wheel system (if equipped)J
Pull
0058 Some functions are available on certain models.
00030058 For detailed operating and safety information, please refer to your Own\
er’s Manual.