2017 NISSAN GT-R lights


> (GLW    0RGHO 0< 1,66$1 *755 20(58 @
2-56Instruments and controls
GUID-6E444278-29B6-4C8B-858F-EC85933BCC26
JVS0803X
The sonar system OFF switch on the lower side
of the instrument panel allows the driver to turn
the sonar system on and off. To turn the sonar
system on and off, the ignition switch must be in
the ON position. The indicator light
*1on the
switch will turn off when the system is turned off.
If the indicator light flashes it may indicate a
malfunction in the sonar system.
(
ªSonar systemº page 5-47 )
GUID-B547D28E-6241-4B24-B8C5-9516353CE47B
JVS0814X
The exhaust sound control switch on the lower
side of the instrument panel allows the driver to
turn the exhaust sound control system on and
off.
To close the electronic control valve, push the
exhaust sound control switch to the ON side.
To open the electronic control valve, push the
exhaust sound control switch to the OFF side.
(
ªExhaust sound control systemº page 5-
58)
GUID-0FB1AF40-8345-44F5-A4A0-BCF46FD7CE43
CAUTION
. The outlet and plug may be hot
during or immediately after use.
. Do not use with accessories that
exceed a 12 volt, 120W (10A) power
draw. Do not use double adapters or
more than one electrical accessory.
. This power outlet is not designed
for use with a cigarette lighter unit.
. Before inserting or disconnecting a
plug, be sure the electrical acces-
sory being used is turned OFF.
. When not in use, be sure to close
the cap. Do not allow water to
contact the outlet.
NOTICE
.Use power outlet with the engine
running to avoid discharging the
vehicle battery.
. Avoid using power outlet when the
air conditioner, headlights or rear
window defroster is on.
SONAR SYSTEM OFF SWITCH EXHAUST SOUND CONTROL
SWITCH (if so equipped)
POWER OUTLETS


> (GLW    0RGHO 0< 1,66$1 *755 20(58 @
2-64Instruments and controls
If the power window automatic function does
not operate properly after performing the pro-
cedure above, it is recommended you have your
vehicle checked by a GT-R certified NISSAN
dealer.GUID-742E2C05-9115-4485-B910-DCB4E3FFB304
GEC0003
MAP LIGHTSGUID-D5CC0FAD-B8D2-427D-A5ED-4B4F4CE78017Push the button as illustrated to turn the light on
or off.
GEC0004
INTERIOR LIGHT CONTROL SWITCHGUID-A8154452-DF27-4375-BFEE-53DBA9D09569The interior light control switch has three
positions: ON
*1, DOOR*2and OFF*3.
ON positionGUID-9E550CDA-6A5F-4776-919A-97920632DA2BWhen the switch is in the ON position*1, the
map lights will illuminate.
NOTICE
Do not use the light for extended
periods of time with the engine
stopped. This could result in a dis-
charged battery.
INTERIOR LIGHTS


> (GLW    0RGHO 0< 1,66$1 *755 20(58 @
NOTE:
The lights will also turn off after a period of
time when the lights remain illuminated
after the ignition switch has been pushed
to the OFF or LOCK position to prevent the
battery from becoming discharged.
DOOR positionGUID-31F69CCA-C199-4829-8D83-95C634DA50F6When the switch is in the DOOR position*2,
the map lights will turn on when the door is
opened and turn off when the door is closed.
The map lights will turn off approximately 15
seconds after the door is closed with the ignition
switch in the OFF or LOCK position.
NOTE:
When the interior light control switch is in
the DOOR position and the door is open,
the light will remain on even when the map
light switch is pressed to turn off.
Key-linked interior light control system:
GUID-E22DEED8-E349-45C2-B1F1-0C9BCF3B8FB9The map lights will turn on and off linked with the
locking and unlocking of the door.
This function operates when the interior light
control switch is in the DOOR position.
. When entering the vehicle
When the driver's seat door is unlocked, the
map light illuminates for approximately 15 seconds, then it turns off.
While the map light is on, if the ignition switch is
pushed to the ACC or ON position, or if the
driver's side door is locked, the light turns off.
.
When exiting the vehicle
When the ignition switch is pushed to the OFF
or LOCK position, the map lights turn on for
approximately 15 seconds, then it turns off.
If the driver's side door is locked while the map
lights are on, the light turns off.
NOTE:
It is possible to cancel the key-linked
interior light control system setting. See
the separate Multi Function Display Own-
er's Manual.
OFF positionGUID-A8A74054-EE3F-40C1-8FC1-F9AA774B30AEWhen the switch is in the OFF position*3, the
map lights will not illuminate, regardless of any
condition.
GUID-955EF2DF-5A59-475A-BDE9-62BBF322A7CF
GEC0002
There is an illuminated vanity mirror on the
reverse side of the sun visor.
Instruments and controls2-65
VANITY MIRROR LIGHTS


> (GLW    0RGHO 0< 1,66$1 *755 20(58 @
Locking doors:GUID-E22DEED8-E349-45C2-B1F1-0C9BCF3B8FB91. Move the shift lever to the&Pposition, push
the ignition switch to the OFF position, and
make sure you carry the Intelligent Key with
you.
2. Close all the doors.
3. Push the LOCK
button*1on the
Intelligent Key.
4. All the doors will lock.
5. The hazard indicator flashes twice and the horn chirps once.
NOTE:
. Doors will lock with the Intelligent Key
while the ignition switch is in the ACC
or ON position.
. Doors will not lock with the Intelligent
Key while any door is open.
Unlocking doors:
GUID-E22DEED8-E349-45C2-B1F1-0C9BCF3B8FB91. Push the UNLOCKbutton*2on the
Intelligent Key once.
2. The hazard indicator flashes once. The
driver's door will unlock.
3. Push the UNLOCK
button*2on the
Intelligent Key again within 60 seconds.
4. The hazard indicator flashes once again. All the doors will unlock.
All doors will be locked automatically unless one of the following operations is performed within 1
minute after pushing the UNLOCK button on the
Intelligent Key while the doors are locked. If
during this 1-minute time period, the UNLOCK
button on the Intelligent Key is pushed, all doors
will be locked automatically after another 1
minute.
.
Opening any door
. Pushing the ignition switch
Opening trunk lid:
GUID-E22DEED8-E349-45C2-B1F1-0C9BCF3B8FB91. Push the TRUNKbutton*3on the
Intelligent Key for more than 1 second.
2. The trunk will unlatch.
3. Raise the trunk lid to open the trunk.
Using panic alarm:
GUID-E22DEED8-E349-45C2-B1F1-0C9BCF3B8FB9If you are near your vehicle and feel threatened,
you may activate the alarm to call attention as
follows:
1. Push the PANIC
button*4on the
Intelligent Key for more than 1 second.
2. The theft warning alarm and headlights will stay on for 25 seconds.
3. The panic alarm stops when:
.It has run for 25 seconds, or.Any of the buttons on the Intelligent Key
are pushed. (Note: the panic button
should be pushed for more than 1 second to turn the panic alarm off.)
SETTING HAZARD INDICATOR AND
HORN MODE
GUID-07DEE234-66C5-4B99-B726-352548B56F15This vehicle is set in hazard indicator and horn
mode when you first receive the vehicle.
When you lock/unlock the doors, the hazard
indicator will flash and the horn (or the outside
chime) will sound as a confirmation.
The following descriptions show how the hazard
indicator and horn will activate when locking/
unlocking the doors and how the horn feature
can be deactivated.
Pre-driving checks and adjustments3-13


> (GLW    0RGHO 0< 1,66$1 *755 20(58 @
GPC0035
Telescopic adjustmentGUID-D95E02D8-F9A2-4DDE-AACE-FFD2717536EEThis adjusts the forward/backward position of
the steering wheel.
1. Press lever
*Bdown*1.
2. Move the steering wheel forward/backward
*2and stop it in an appropriate position.
3. Lift up lever
*Bto lock the steering wheel in
position
*3.
GUID-86A7CDD6-6378-498A-8130-F86FE7672682
GEC0001
Lower the sun visor to block sunlight coming
from the forward direction.
To block sunlight coming from the side, lower
the sun visor, then unclip it from the hook and
move it to the side.
GUID-8A538B66-EC24-4EDB-9944-98AD45B85945
GPC0050
INSIDE MIRRORGUID-768F94B5-487A-4A7D-9282-BD6981380E00The inside mirror is designed so that it
automatically changes reflection according to
the intensity of the headlights of the following
vehicle.
The anti-glare system will be automatically
turned on when the ignition switch is pushed
to the ON position.
When the anti-glare system is turned on, the
indicator light
*Awill illuminate and excessive
glare from the headlights of the vehicle behind
you will be reduced.
Push the ª*º switch
*Cto make the inside
Pre-driving checks and adjustments3-27
SUN VISORS MIRRORS


> (GLW    0RGHO 0< 1,66$1 *755 20(58 @
4-12Display screen, heater, air conditioner and audio systems
zone control button will come on. To turn off
the passenger's side temperature control,
push the DUAL zone control button.
Heating (A/C OFF):
GUID-E22DEED8-E349-45C2-B1F1-0C9BCF3B8FB9The air conditioner does not activate in this
mode. Only use this mode when you need to
heat the vehicle.
1. Push the AUTO button on. (The indicator light on the button will illuminate.)
2. If the indicator light on the A/C button is turned on, push the A/C button. (The
indicator light will turn off.)
3. Turn the temperature control dial on the driver's side to set the desired temperature.
.The temperature of the passenger com-
partment will be maintained automati-
cally. Air flow distribution and fan speed
are also controlled automatically.
.Do not set the temperature lower than
the outside air temperature or the system
may not work properly.
.Not recommended if windows fog up.
4. You can individually set driver's and front passenger's side temperature using each
temperature control dial. When the DUAL
zone control button is pushed or passen-
ger's side temperature control dial is turned,
the DUAL indicator light will come on. To turn off the passenger's side temperature
control, push the DUAL zone control button.
Dehumidified defrosting or defogging:
GUID-E22DEED8-E349-45C2-B1F1-0C9BCF3B8FB91. Push thefront defroster button on. (The
indicator light on the button will come on.)
2. Turn the temperature control dial on the driver's side to set the desired temperature.
.To quickly remove ice from the outside of
the windows, use the
fan speed
control button to set the fan speed to
maximum.
.As soon as possible after the windshield
is clean, push the AUTO button to return
to the automatic mode.
When the
front defroster button is pushed,
the air conditioner will automatically be turned
on at outside temperatures above 368F (28C) to
defrost the windshield, and the air recirculation
mode will automatically be turned off. Outside
air is drawn into the passenger compartment to
improve the defrosting performance.
Manual operationGUID-30F047BE-C865-4A7A-B732-C613CB8070B7
Fan speed control:GUID-E22DEED8-E349-45C2-B1F1-0C9BCF3B8FB9Push thefan speed control button to
manually control the fan speed.
Push the AUTO button to return to automatic
control of the fan speed. Air intake control:
GUID-E22DEED8-E349-45C2-B1F1-0C9BCF3B8FB9.
Push theair recirculation button to
recirculate interior air inside the vehicle. The
indicator light on the button will come
on.
. Push the
outside air circulation button
to draw outside air into the passenger
compartment. The
indicator light on
the button will come on.
. To switch to automatic control mode, push
and hold the
air recirculation button or
the
outside air circulation button
(whichever indicator light is illuminated) for
about 2 seconds. The indicator lights (both
air recirculation and outside air circulation
buttons) will flash twice, and then the air
intake will be controlled automatically.
Air flow control:
GUID-E22DEED8-E349-45C2-B1F1-0C9BCF3B8FB9Push the MODE button repeatedly to change
the air flow mode.
: Air flows from the center and side ventila- tors.
: Air flows from the center and side ventila-tors and the foot outlets.
: Air flows mainly from the foot outlets.
: Air flows from the defroster and footoutlets.


> (GLW    0RGHO 0< 1,66$1 *755 20(58 @
(ªIntelligent Key battery replace-
mentº page 8-27)GUID-43655779-324C-4224-B81C-E27C8753FA64. Make sure the area around the vehicle is
clear.
. Check fluid levels such as engine oil, cool-
ant, brake fluid and window washer fluid as
frequently as possible, or at least whenever
you refuel.
. Check that all windows and lights are clean.
. Visually inspect tires for their appearance
and condition. Also check tires for proper
inflation.
. Lock all doors.
. Position seat.
. Adjust inside and outside mirrors.
. Fasten seat belts and ask all passengers to
do likewise.
. Check the operation of warning lights when
the ignition switch is pushed to the ON
position. (
ªWarning lights, indicator
lights and audible remindersº page 2-25)
GUID-5155C512-8955-446D-8785-34D3B79E3F16
NOTE:
. This vehicle includes spark plugs that
are designed for maximum perfor-
mance. If the start time becomes long-
er, the plugs may be fouled, making the
engine difficult to start. If this occurs,
start the engine using the procedure
described in this section.
. A click sound may be heard when the
brake pedal is depressed and released.
This is normal.
. A low rattling operating sound may
occur when the engine is started or
stopped. This is because of the trans-
mission gear design, light flywheel and
dry sump lubrication system used in
this transmission. This does not indi-
cate that there is a malfunction. This
sound is likely to occur in particular if
the engine is stopped when the tem-
perature of the transmission oil is high.
Starting and driving5-13
BEFORE STARTING THE ENGINE STARTING THE ENGINE


> (GLW    0RGHO 0< 1,66$1 *755 20(58 @
5-30Starting and driving
Vehicle Dynamic Control (VDC)GUID-7973499D-F745-4C3F-BB1F-E0E03ED5A2FE
Set up modeFeatures
.In addition to the normal mode function, this mode adjusts front and rear wheel
power distribution to improve handling.
.With the transmission switch in R mode, the R mode start function can be used.
(ªR mode start functionº page 5-32)
Normal (light is off)
.This mode is for use in a broad range of driving conditions, for routine driving during
fair to rainy weather, as well as for driving on road surfaces that are slippery due to
snow or ice.
Make sure to use this mode for everyday driving.
.Temporary mode that can be used to free if it is stuck in snow or mud
Also place transmission setup switch in SAVE mode when freeing a stuck vehicle.
NOTE:
Always make sure the VDC is ON before driving the vehicle by checking that the VDC OFF
indicator lights on the meter and the VDC set-up switch are not illuminated. The GT-R is a
high performance vehicle and the VDC must be on/activated to provide proper powertrain
operation and intended drivability.
WARNING
. The VDC OFF mode should ONLY be
used briefly to help free the vehicle
if stuck in snow or mud by tempora-
rily stopping operation of the VDC
to maintain wheel torque.
. Driving the GT-R with the VDC off
may lead to handling issues related
to steering maneuvers, acceleration,
or deceleration. Moreover, driving
with the VDC off can result in an
inoperative vehicle by causing ser-
ious damage to the powertrain,
including damage to the Transaxle
Assembly including Transfer, Clutch,
Gears, Transaxle case and all of its
components and other drivetrain
component(s) by overheating or ex-
cessive force.
. Damage to the powertrain or any
drivetrain component(s) that occurs
when there is a record in the Vehicle
Status Data Recorder (VSDR) that
the vehicle was driven with VDC off
during the period when the damage
was incurred is excluded from war-
ranty coverage.